High-Flow Double-Inlet Sink Faucets








Fill sinks and buckets quickly. These faucets have a flow rate of 7.5 gpm or higher—more than three times that of other faucets.
Faucets with a back inlet mount to piping coming out of the wall. Also known as deck-mount faucets, faucets with a bottom inlet mount on top of the sink. Faucets with a back/bottom inlet typically mount to the wall. They come with two 3/4" inlet elbows, so you can mount this faucet to a sink as well.
Styles A-C, E, and F have a 3/4" male GHT outlet, which is a standard garden hose connection.
Styles B and C have a backflow-prevention valve, which keeps liquid from flowing back into your water supply.
Styles B-H have handles that are easy to turn, which helps them comply with ADA guidelines. To make sure these faucets can be accessed from a wheelchair, install them so the handles and spout are no more than 48" from the floor.
Style G faucets have a double-jointed spout that can swing in two directions at once, so they’re easier to maneuver than spouts with a single joint. The second joint also adds height, so you can fill tall pots or wash large objects.
Faucets | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Faucet Repair and Installation Kits | Hot Replacement Cartridges | Cold Replacement Cartridges | Hot/Cold Replacement Cartridges | |||||||||||||
Style | Pipe Size | Thread Type | Gender | Flow Rate, gpm | Spout Lg. | For No. of Sink Faucet Holes | Inlet Hole Ctr.-to-Ctr. | Each | Each | Each | Each | Each | |||||
Back Inlet (Wall Mount) | |||||||||||||||||
Fixed Spout—Chrome-Plated Brass | |||||||||||||||||
A | 1/2 | NPT | Female | 14 | 2" | 2 | 7 3/4"-8 1/4" | 0000000 | 0000000 | 0000000 | 000000 | 000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
B | 1/2 | NPT | Female | 14 | 6 1/2" | 2 | 7 3/4"-8 1/4" | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
C | 1/2 | NPT | Female | 7.5 | 2 1/2" | 2 | 3"-8 3/8" | 0000000 | 000000 | 000000 | 00 | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
Swivel Spout—Chrome-Plated Brass | |||||||||||||||||
D | 1/2 | NPT | Female | 23 | 5 3/4" | 2 | 7 3/4"-8 1/4" | 0000000 | 000000 | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
E | 1/2 | NPT | Female | 14 | 6" | 2 | 8" | 0000000 | 000000 | 00000000 | 00000 | 000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
E | 1/2 | NPT | Male | 14 | 6" | 2 | 8" | 0000000 | 000000 | 00000000 | 00000 | 000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
Bottom Inlet (Sink Mount) | |||||||||||||||||
Swivel Spout—Chrome-Plated Brass | |||||||||||||||||
F | 1/2 | NPT | Male | 12 | 8" | 2 | 4" | 0000000 | 000000 | 00000000 | 00000 | 000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
G | 3/4 | NPT | Female | 43 | 24" | 2 | 7 3/4"-8 1/4" | 000000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 | 0000000 | 000000 |
H | 3/4 | NPT | Female | 44 | 18" | 2 | 8" | 000000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
H | 3/4 | NPT | Female | 48 | 24" | 2 | 7 3/4"-8 1/4" | 000000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
H | 3/4 | NPT | Male | 44 | 14" | 2 | 8" | 000000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
Back, Bottom Inlet (Wall Mount) | |||||||||||||||||
Swivel Spout—Chrome-Plated Brass | |||||||||||||||||
G | 3/4 | NPT | Female | 43 | 24" | 2 | 7 3/4"-8 1/4" | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
H | 3/4 | NPT | Female | 37.5 | 12" | 2 | 7 3/4"-8 1/4" | 0000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
H | 3/4 | NPT | Female | 37.5 | 18" | 2 | 7 3/4"-8 1/4" | 0000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
Double-Inlet Sink Faucets





Swivel faucets are often used with wide or double-bowl sinks.
Styles A-K meet NSF/ANSI 61 for drinking water.
Styles A, C, D, F, G, and J-L help comply with ADA when properly installed.
Faucets that cannot be sold to the regions listed are restricted by local energy efficiency requirements.



Faucets | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Hot Replacement Cartridges | Cold Replacement Cartridges | Hot/Cold Replacement Cartridges | ||||||||||||
Style | Pipe Size | Thread Type | Flow Rate, gpm | Spout Lg. | For No. of Sink Faucet Holes | Inlet Hole Ctr.-to-Ctr. | Includes | Each | Each | Each | Each | ||||
Swivel Spout—Chrome-Plated Brass (Meets NSF/ANSI 61) | |||||||||||||||
J | 1/2 | NPT | 2.2 | 9 1/4" | 3 | 8" | Aerator | 0000000 | 0000000 | 000000 | 00 | 000000 | 00 | 0000000 | 000000 |
L | 1/2 | NPT | 1.2 | 8" | 2 | 8" | Aerator | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 000000 | 00 |
L | 1/2 | NPT | 1.2 | 8" | 4 | 8" | Aerator, Extendable Faucet Sprayer | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 000000 | 00 |
Swivel Spout—Chrome-Plated Metal (Meets NSF/ANSI 61) | |||||||||||||||
K | 1/2 | NPS | 1.5 | 9 9/16" | 4 | 8" | Aerator, Extendable Faucet Sprayer | 0000000 | 000000 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |

Style M has a jointed spout to access triple-bowl sinks.
Faucets | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Hot Replacement Cartridges | Cold Replacement Cartridges | ||||||||||||
Style | Pipe Size | Thread Type | Flow Rate, gpm | Spout Lg. | For No. of Sink Faucet Holes | Inlet Hole Ctr.-to-Ctr. | Includes | Cannot Be Sold To | Each | Each | Each | |||
Swivel Spout—Chrome-Plated Brass (Meets NSF/ANSI 61) | ||||||||||||||
M | 1/2 | NPT | 2.2 | 13" | 2 | 3"-8 3/8" | Aerator | CA, CO, DC, HI, MA, MD, ME, NJ, NY, OR, RI, VT, WA | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 |
M | 1/2 | NPT | 2.2 | 18" | 2 | 3"-8 3/8" | Aerator | CA, CO, DC, HI, MA, MD, ME, NJ, NY, OR, RI, VT, WA | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |

Style N has a 3/4" male GHT outlet which is a standard garden hose connection. The inlet is NPSF, which is also known as Dryseal.
Single-Inlet Sink Faucets



Styles A, B, and C have a 3/4" male GHT outlet, which is a standard garden hose connection.
Inlet | Spout | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Style | For Water Temp. | No. of Faucet Supply Lines | Pipe Size | Thread Type | Flow Rate, gpm | Lg. | Outlet Hose Connection Type | For No. of Sink Faucet Holes | Each | |
Fixed Spout—Acetal Plastic | ||||||||||
A | Hot or Cold | 1 | 1/2 | NPT | Not Rated | 4 1/8" | Threaded | 1 | 0000000 | 00000 |
A | Hot or Cold | 1 | 3/4 | NPT | Not Rated | 4 1/8" | Threaded | 1 | 0000000 | 0000 |
Fixed Spout—Brass | ||||||||||
B | Hot or Cold | 1 | 1/2 | NPT | 7 | 3 3/4" | Threaded | 1 | 000000 | 00000 |
B | Hot or Cold | 1 | 3/4 | NPT | 7 | 3 3/4" | Threaded | 1 | 000000 | 00000 |
Fixed Spout—Chrome-Plated Brass | ||||||||||
C | Cold | 1 | 1/2 | NPT | 5.4 | 4" | Threaded | 1 | 000000 | 000000 |





Swivel faucets are often used with wide or double-bowl sinks.
Styles D, K, L, M, N, and P help you comply with ADA standards because the handles turn with only a little bit of effort. Install them so they’re no more than 48" off the ground to make sure they’re wheelchair accessible.
Styles D and M meet NSF/ANSI 61, so they’re safe to use with drinking water.
Styles K, L, M, N, and P are easy to turn on with the back of a hand or elbow, so you don’t dirty the handles.
Faucets with an aerator provide a smooth, powerful spray.
Faucets with an extendable faucet sprayer make it easy to rinse hard-to-reach areas. The one on Style M pulls down directly from the spout.
Inlet | Spout | Faucets | Replacement Cartridges | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Water Temp. | No. of Faucet Supply Lines | Pipe Size | Thread Type | For Tube OD | Tube Connection Type | Flow Rate, gpm | Lg. | Ht. | For No. of Sink Faucet Holes | Includes | Each | Each | ||
Fixed, Swivel Spout—Chrome-Plated Brass | |||||||||||||||
K | Hot/Cold | 2 | __ | __ | 3/8" | Compression | 0.5 | 5 3/8" | 13 3/8" | 1 | __ | 00000000 | 0000000 | 000000 | 00 |
L | Hot or Cold | 1 | 1/2 | NPS | __ | __ | 0.5 | 3 1/2" | 11 1/2" | 1 | __ | 00000000 | 000000 | 000000 | 00 |
Swivel Spout—Chrome-Plated Brass | |||||||||||||||
M | Hot/Cold | 2 | __ | __ | 3/8" | Compression | 1.5 | 8 1/4" | 17" | 1 | Extendable Faucet Sprayer | 00000000 | 000000 | 00000000 | 000000 |
N | Hot/Cold | 2 | __ | __ | 3/8" | Compression | 1.5 | 9" | __ | 1 | Aerator | 0000000 | 00000 | 0000000 | 00000 |
N | Hot/Cold | 2 | __ | __ | 3/8" | Compression | 1.5 | 9" | __ | 2 | Aerator, Extendable Faucet Sprayer | 0000000 | 000000 | 0000000 | 00000 |
P | Hot/Cold | 2 | __ | __ | 3/8" | Compression | 1.5 | 8 3/4" | __ | 1 | Aerator | 0000000 | 000000 | 0000000 | 00000 |
P | Hot/Cold | 2 | __ | __ | 3/8" | Compression | 1.5 | 8 3/4" | __ | 2 | Aerator, Extendable Faucet Sprayer | 0000000 | 000000 | 0000000 | 00000 |
Automatic Shut-Off Sink Faucets

Prevent wasted water with these faucets that shut off when the handle is released.
Washdown Sprayers

Often used for industrial parts washing and food service applications, these flexible sprayers shoot a concentrated jet of water to blast away dirt and grease. They meet NSF/ANSI 61 standards for drinking water.
Style B sprayers are best when clearance is a concern, such as mounting them under shelves.
Faucets with one inlet come with everything required to install including hot and cold water supply hoses. Faucets with two inlets require an installation kit and two supply hoses (sold separately). Installation kits include the fittings required to connect to the supply hoses.
Optional push-button spray heads turn on with a push from your thumb, rather than gripping a lever handle. They spray in a shower pattern.
Optional easy-trigger spray heads have a handle that’s easy to press to start the flow of water. Lock the handle in place one-handed to keep water flowing constantly.





Washdown Sprayers | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlets | Installation Kits | Supply Hoses | Replacement Springs | ||||||||||||||
Style | No. of | Pipe Size | Thread Type | Hole Ctr.-to-Ctr. | For Tube OD | Tube Connection Type | Flow Rate, gpm | Ht. | Hose Lg. | Each | Each | Each | Each | ||||
Bottom Inlet—Chrome-Plated Brass with Stainless Steel Hose Cover | |||||||||||||||||
Sink Mount | |||||||||||||||||
A | 1 | __ | __ | __ | 5/8" | Compression | 1.1 | 46 1/2" | 44" | 000000 | 0000000 | 000000 | 00 | 000000 | 00 | 00000000 | 000000 |
A | 2 | 1/2 | NPT | 8" | __ | __ | 1.1 | 42" | 44" | 000000 | 000000 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
B | 2 | 1/2 | NPT | 8" | __ | __ | 1.1 | 16 1/8" | 14 3/8" | 00000000 | 000000 | 0000000 | 00000 | 00000000 | 0000 | 000000 | 00 |
Back Inlet—Chrome-Plated Brass with Stainless Steel Hose Cover | |||||||||||||||||
Wall Mount | |||||||||||||||||
A | 2 | 1/2 | NPT | 8" | __ | __ | 1.1 | 34 1/2" | 44" | 000000 | 000000 | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 |
B | 2 | 1/2 | NPT | 8" | __ | __ | 1.1 | 13 3/8" | 20" | 00000000 | 000000 | 0000000 | 00000 | 00000000 | 0000 | 000000 | 00 |
Optional Push-Button Spray Head (2.2 gpm) | 00000000 | Each | 0000000 |
Spray Head Maintenance Kit for 1.1 gpm Spray Head | 0000000 | Each | 00000 |
1.1 gpm Flow Rate Replacement Spray Head | 00000000 | Each | 000000 |
Replacement Spray Face for 1.1 gpm Spray Head | 00000000 | Each | 0000 |
Replacement Handle for 1.1 gpm Spray Head | 0000000 | Each | 00000 |
44" Replacement Hose with Spray Head | 0000000 | Each | 000000 |
Optional Easy-Trigger Spray Head (1.4 gpm) | 0000000 | Each | 000000 |
Optional Wall Bracket for Style A | 0000000 | Each | 00000 |
44" Replacement Hose | 0000000 | Each | 00000 |
14 3/8" Replacement Hose | 00000000 | Each | 00000 |