Material Material |
|---|
|
Finish Finish |
|---|
|
For Sink Drain Opening Diameter For Sink DrainOpening Diameter |
|---|
|
|
Connection Style Connection Style |
|---|
 | Socket Connect |
 | Clamp On |
For Pipe Material For Pipe Material |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Sink Drains
Styles A and C have strainers that snap into the top opening. Strainers can be popped out and replaced with a stopper.
Styles B, D, and E have strainers that lift out of the drain.
Style E has extended threads for use with thick sinks.
Style F is chemical resistant and often used for lab sinks.
Tailpiece | ||||||||
|---|---|---|---|---|---|---|---|---|
| Style | For Sink Drain Opening Dia. | Top Dia. | For OD | OD | Lg. | Drain Ht. | Each | |
Stainless Steel | ||||||||
| A | 2"-2 1/2" | 2 3/4" | 1 1/2" | __ | __ | 1 3/8" | 0000000 | 00000 |
| C | 2"-2 1/2" | 2 3/4" | __ | 1 1/4" | 4" | 1 3/8" | 0000000 | 00000 |
| C | 2"-2 1/2" | 2 3/4" | __ | 1 1/4" | 6" | 1 3/8" | 0000000 | 00000 |
| C | 2"-2 1/2" | 2 3/4" | __ | 1 1/4" | 8" | 1 3/8" | 0000000 | 00000 |
| C | 2"-2 1/2" | 2 3/4" | __ | 1 1/4" | 12" | 1 3/8" | 0000000 | 00000 |
| C | 2"-2 1/2" | 2 3/4" | __ | 1 1/2" | 4" | 1 3/8" | 000000 | 00000 |
| C | 2"-2 1/2" | 2 3/4" | __ | 1 1/2" | 6" | 1 3/8" | 000000 | 00000 |
| C | 2"-2 1/2" | 2 3/4" | __ | 1 1/2" | 8" | 1 3/8" | 000000 | 00000 |
| C | 2"-2 1/2" | 2 3/4" | __ | 1 1/2" | 12" | 1 3/8" | 000000 | 00000 |
Drains | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Tailpiece | Replacement Strainers | |||||||||
| Style | For Sink Drain Opening Dia. | Top Dia. | For OD | OD | Lg. | Drain Ht. | Each | Each | ||
Stainless Steel | ||||||||||
| A | 3 1/2"-4" | 4 1/4" | 1 1/2" | __ | __ | 1 7/8" | 000000 | 00000 | 000000 | 00 |
| B | 2"-2 1/2" | 2 3/4" | 1 1/2" | __ | __ | 1 5/8" | 0000000 | 0000 | 0000000 | 00000 |
| C | 3 1/2"-4" | 4 1/4" | __ | 1 1/2" | 4" | 1 7/8" | 000000 | 00000 | 000000 | 00 |
| D | 3 1/2"-4" | 4 1/2" | __ | 1 1/2" | 4" | 2 1/2" | 0000000 | 00000 | 0000000 | 0000 |
| E | 3 1/2"-4" | 4 1/2" | __ | 1 1/2" | 4" | 3 3/8" | 0000000 | 00000 | 0000000 | 0000 |
Lavatory Sink Drains
Style C offers additional clearance under the sink.
Style D opens and closes with the included rod, strap, and lever.
Lever-Control Sink Drains
Avoid reaching into your sink—plug and drain your sink by moving a lever beneath the bowl. These drains are often used in food service applications.
Drain | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Sink Drain Opening Dia. | Top Dia. | Ht. | Pipe Size | Thread Type | Gender | Strainer Material | Flange Material | Each | |
Nickel-Plated Brass | |||||||||
| 3" | 4" | 4 1/2" | 1 1/2 | NPS | Male | Stainless Steel | Stainless Steel | 0000000 | 000000 |
| 3" | 4" | 4 1/2" | 2 | NPS | Male | Stainless Steel | Stainless Steel | 0000000 | 000000 |
| 3 1/2" | 4 1/2" | 4 1/2" | 1 1/2 | NPS | Male | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| 3 1/2" | 4 1/2" | 4 1/2" | 2 | NPS | Male | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Lever-Control Sink Drains with Overflow Outlet Pipe
Avoid reaching into your sink—plug and drain your sink by moving a lever beneath the bowl. These drains are often used in food service applications. Use a hacksaw to trim the overflow outlet pipe to size.
Drain | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Sink Drain Opening Dia. | Top Dia. | Ht. | Pipe Size | Thread Type | Gender | Strainer Material | Flange Material | Each | |
Nickel-Plated Brass | |||||||||
| 3" | 4" | 4 1/2" | 1 1/2 | NPS | Male | Stainless Steel | Stainless Steel | 0000000 | 0000000 |
| 3" | 4" | 4 1/2" | 2 | NPS | Male | Stainless Steel | Stainless Steel | 0000000 | 000000 |
| 3 1/2" | 4 1/2" | 4 1/2" | 1 1/2 | NPS | Male | Stainless Steel | Stainless Steel | 0000000 | 000000 |
| 3 1/2" | 4 1/2" | 4 1/2" | 2 | NPS | Male | Stainless Steel | Stainless Steel | 0000000 | 000000 |
Sink Drain Traps
Prevent sewer gas from entering your building. Traps swivel and adjust vertically for convenient installation.
| OD | Inlet Connection Type | Outlet Pipe Connection Type | Includes | Each | |
P-Trap (Wall Mount) | |||||
|---|---|---|---|---|---|
White Plastic | |||||
| 1 1/2" | Slip Joint | Unthreaded | 1 1/4" Washer Adapter, Slip-Joint Nuts and Washers | 00000000 | 00000 |
Chrome-Plated Brass | |||||
| 1 1/4" | Slip Joint | Unthreaded | Slip-Joint Nuts and Washers | 0000000 | 00000 |
| 1 1/2" | Slip Joint | Unthreaded | Slip-Joint Nuts and Washers | 0000000 | 00000 |
S-Trap (Floor Mount) | |||||
White Plastic | |||||
| 1 1/2" | Slip Joint | Unthreaded | 1 1/4" Washer Adapter, Slip-Joint Nuts and Washers | 00000000 | 0000 |
Chrome-Plated Brass | |||||
| 1 1/4" | Slip Joint | Unthreaded | Slip-Joint Nuts and Washers | 0000000 | 00000 |
| 1 1/2" | Slip Joint | Unthreaded | Slip-Joint Nuts and Washers | 0000000 | 00000 |
| OD | Inlet Connection Type | Outlet Pipe Connection Type | Includes | Each | |
P-Trap (Wall Mount) | |||||
|---|---|---|---|---|---|
Chrome-Plated Brass | |||||
| 1 1/4" | Slip Joint | Unthreaded | Slip-Joint Nuts and Washers | 0000000 | 000000 |
| 1 1/2" | Slip Joint | Unthreaded | Slip-Joint Nuts and Washers | 0000000 | 00000 |
S-Trap (Floor Mount) | |||||
Chrome-Plated Brass | |||||
| 1 1/4" | Slip Joint | Unthreaded | Slip-Joint Nuts and Washers | 0000000 | 00000 |
| 1 1/2" | Slip Joint | Unthreaded | Slip-Joint Nuts and Washers | 0000000 | 00000 |
Outlet | P-Trap (Wall Mount) | ||||||
|---|---|---|---|---|---|---|---|
| OD | Inlet Connection Type | Pipe Size | Thread Type | Gender | Includes | Each | |
Chrome-Plated Brass | |||||||
| 1 1/2" | Slip Joint | 1 1/2 | NPT | Female | Slip-Joint Nuts and Washers | 000000 | 000000 |
Adjustable-Neck Sink Drain Traps
Connect sink drains that are offset from wall drain outlets with this drain trap.
Max. Adjustment | P-Trap | ||||||
|---|---|---|---|---|---|---|---|
| OD | Horizontal | Vertical | Inlet Connection Type | Outlet Connection Type | Includes | Each | |
White Plastic | |||||||
| 1 1/2" | 2 1/2" | 3 1/2" | Slip Joint | Slip Joint | 1 1/4" Washer Adapter, Slip-Joint Nuts and Washers | 000000 | 000000 |
J-Bends
Use these J-bends as replacement parts for P-traps and S-traps.
Easy-to-Clean J-Bends
Loosen the knobs on this J-bend to clean it out without removing it from your pipe system. It has a removable screen that traps objects while allowing water to flow.
Slip-Joint Outlet Connection | ||||
|---|---|---|---|---|
| OD | Inlet Connection Type | Includes | Each | |
Clear Plastic | ||||
| 1 1/2" | Slip Joint | 1 1/4" Washer Adapter, Slip-Joint Nuts and Washers | 0000000 | 00000 |
Sink Drain Tailpieces
Stainless
Steel
Use these flanged tailpieces to connect a sink drain to a P-trap or S-trap.
4" Lg. | 6" Lg. | 8" Lg. | 12" Lg. | |||||
|---|---|---|---|---|---|---|---|---|
| OD | Each | Each | Each | Each | ||||
White Plastic | ||||||||
| 1 1/2" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Chrome-Plated Brass | ||||||||
| 1 1/4" | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 |
| 1 1/2" | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Stainless Steel | ||||||||
| 1 1/2" | 0000000 | 0000 | 0000000 | 0000 | 000000 | 00 | 0000000 | 00000 |
Extension Tubing for Sink Drain Traps
Use these extensions to help connect drain tailpieces to drain traps.
Inlet | ||||||
|---|---|---|---|---|---|---|
| OD | Lg. | Pipe Size | Thread Type | Gender | Each | |
Chrome-Plated Brass | ||||||
| 1 1/4" | 6" | 1 1/4 | NPT | Male | 0000000 | 00000 |
Dual-Connection Sink Drain Outlets
Connect two drains to a single outlet.
| OD | Includes | Lg. | Each | |
Center Outlet | ||||
|---|---|---|---|---|
White Plastic | ||||
| 1 1/2" | Slip-Joint Nuts and Washers | 16" | 00000000 | 00000 |
Chrome-Plated Brass | ||||
| 1 1/2" | Slip-Joint Nuts and Washers | 15 1/2" | 000000 | 00000 |
| 1 1/2" | Slip-Joint Nuts and Washers | 25" | 000000 | 00000 |
End Outlet | ||||
White Plastic | ||||
| 1 1/2" | Slip-Joint Nuts and Washers | 16" | 00000000 | 0000 |
Chrome-Plated Brass | ||||
| 1 1/2" | Slip-Joint Nuts and Washers | 16" | 0000000 | 00000 |
| 1 1/2" | Slip-Joint Nuts and Washers | 25" | 0000000 | 000000 |
Plastic Sink Drains with Collection Trap
Often used in laboratory applications, these drains have a removable collection trap that catches sediment and objects. Traps also block vapors from returning up through the drain.
Drains with slip-joint connection include an adapter tube with an unthreaded male outlet for use as an extension to another slip-joint connection. Trap withstands frost, boiling water, and detergents.
Drain with pipe connection has a semi-clear trap so you can see when it needs to be emptied. Trap withstands harsh chemicals.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cap., oz. | Dia. | Ht. | For Sink Drain Opening Dia. | Top Dia. | Outlet OD | Color | Trap Color | Each | |
Drains with Adapter Tube and Plastic Stopper | |||||||||
| 8 | 3 3/8" | 10 5/8" | 1 7/8"-3" | 3 3/8" | 1 1/2" | White | White | 000000 | 0000000 |
Overall | Outlet | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Dia. | Ht. | For Sink Drain Opening Dia. | Top Dia. | Pipe Size | Thread Type | Gender | Color | Trap Color | Specifications Met | Each | |
Drains with Plastic Stopper | ||||||||||||
| 1 | 7 1/2" | 11 3/4" | 1 7/8"-3" | 3 3/8" | 1 1/2 | NPT | Male | Black | Semi-Clear | ASTM F1412 | 0000000 | 0000000 |
| 2 | 7 1/2" | 17" | 1 7/8"-3" | 3 3/8" | 1 1/2 | NPT | Male | Black | Semi-Clear | ASTM F1412 | 0000000 | 000000 |
Plastic Sink Drains with Adjustable-Height P-Trap
This drain is chemical resistant and often used in lab sinks. The P-trap prevents vapors from returning up through the drain.
Outlet | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Sink Drain Opening Dia. | Top Dia. | Max. Vertical Adjustment | Pipe Size | Thread Type | Gender | Color | Trap Color | Specifications Met | Each | |
Drains with Plastic Stopper | ||||||||||
| 1 7/8"-3" | 3 3/8" | 5 1/2" | 1 1/2 | NPT | Male | Black | White | ASTM F1412 | 0000000 | 0000000 |
Aboveground Standard-Wall PVC Pipe
Fittings for Drain, Waste, and Vent
- For Use With: Water
- Max. Temperature: 140° F
- Specifications Met: ASTM D1784, ASTM D2665
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Schedule 40 PVC Plastic
These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications. Fittings are PVC, which has good corrosion resistance. They meet ASTM D1784 and ASTM D2665 specifications and testing requirements for material quality.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.
270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
Drain, Waste, and Vent ABS Pipe Fittings for Chemicals
- For Use With: Sodium Hydroxide
- Max. Temperature: 180° F
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
These Schedule 40 fittings are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Fittings meet ASTM D2661, ASTM D3311, ASTM D3965, and ASTM F1498 specifications and testing requirements for material quality and product dimensions.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.
270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
Gravity-Flow CPVC Pipe Fittings
for Corrosive Chemical Waste
- For Use With: Hydrochloric Acid, Nitric Acid, Salt Water, Sulfuric Acid
- Temperature Range: 40° to 200° F
- Specifications Met: ASTM F2618, IAPMO Certified, NSF/ANSI 14, UL 94V0
Made of CPVC, these fittings have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances. They meet NSF/ANSI 14 requirements for use in corrosive waste gravity-flow systems. Fittings are comparable to Corzan. They meet UL 94V0 for flame retardance and ASTM F2618 specifications and testing requirements for material quality. They are IAPMO certified to comply with the International Association for Plumbing and Mechanical Officials product performance standards and the Uniform Plumbing Code (UPC) for installation and repair of plumbing systems.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
