No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.

Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.

Also known as troffers, these lights fit most standard drop-ceiling grids.

Also known as turret lights, these fixtures have uplight or downlight reflectors to direct light.

Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

A sealed lens keeps moisture out to protect these lights against washdowns.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Connect the hooks to a fixture to suspend lights from the ceiling.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.

Heads adjust to any angle to direct light where needed.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Hardwire these lights to a power source.

Hang these lights where you need them on the job site.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

Bring light to areas that don't have electrical power service.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.

These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.

Compact and easy to carry, these IP65-rated lights stand up to dust and low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed.

The gooseneck arm on these lights allows you to direct light exactly where it's needed. They have a reflector that distributes light more evenly than other portable lights.

Small enough to fit in your pocket.

Shine light into hard-to-reach spaces with these flexible-arm flashlights.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.

Always have a flashlight on hand—these attach to a key ring.

Direct light where it’s needed with these pivoting-head flashlights. When plugged in, they’ll automatically light up if the power goes out.

Extend light into hard-to-reach spaces by attaching a fiber-optic cable to your flashlight.

Similar to a holster without the bulk, belt loops hold your flashlight when not in use.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They're rated for use in environments where hazardous material is present.

Small enough to keep in your shirt pocket, these penlights are rated for use in environments where hazardous material is present.

All of these flashlights stand up to wet environments.

Keep your hands free by wearing a flashlight on your head.

Safe for use in environments where hazardous material is present.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

Mount add-on heads in remote areas to extend emergency lighting.

No need for wiring—these lights plug-in with a two-prong plug.

Wire terminals allow you to connect these bulbs to a power source through a panel.

These bulbs are sized to fit tight spaces such as signs, control panels, indicators, and flashlights.

A sealing gasket keeps out oil and other contaminants.

These bulbs are sized to fit tight spaces such as indicators and vehicle lights.

These bulbs lock into GU24 light sockets with a twist.

Trim around the bulb provides a finished look to recessed lights.

Pins on the base lock these bulbs into sockets to withstand vibration.

These bulbs have a bi-pin connection to lock into sockets.

Replace metal halide, high-pressure sodium, and mercury vapor light bulbs with longer-lasting, energy-efficient LEDs.

Often used in task lights, these four-pin wedge base bulbs are comparable to PL, Dulux, and Biax bulbs.

Also known as beacon lights and signal lamps, these bulbs provide high-intensity light so they're often used in security warning devices and machinery.

Replace bayonet base incandescent bulbs in exit signs with longer-lasting, energy-efficient LEDs.

Rated NEMA 4X and 13 for protection from dirt, washdowns, corrosion, and oil/coolant spraying.

These lights can switch between being continuous or flashing.

These lights can switch between continuous, flashing, or revolving.

These lights are UL listed for environments where fuels, solvents, acetylene, and other hazardous substances may be present.

Place these lights in full sun and their batteries charge during daylight hours. Lights automatically switch on at dusk and off at dawn.