McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    136 Products
    About Leveling Mounts
    industrial info icon

    Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

    Rigid Leveling Mounts with Bracket

    Image of Product. Style 1. Front orientation. Contains Annotated. Leveling Mounts. Rigid Leveling Mounts with Bracket, Style 1, 4 Mounting Holes.
    Image of Product. Style 2. Front orientation. Contains Annotated. Leveling Mounts. Rigid Leveling Mounts with Bracket, Style 2, 4 Mounting Holes.

    Style 1

    Style 2

    Image of Product. Style 3. Front orientation. Contains Annotated. Leveling Mounts. Rigid Leveling Mounts with Bracket, Style 3, 4 Mounting Holes.
    Image of Product. Style 4. Front orientation. Contains Annotated. Leveling Mounts. Rigid Leveling Mounts with Bracket, Style 4, 4 Mounting Holes.

    Style 3

    Style 4

    Level furniture without feet, such as cabinets and workbenches, on uneven surfaces. Attach the bracket using the included screws.
    Nylon Base—These mounts won't scratch or scuff floors when you're moving equipment.
    Steel Base—These mounts are best for dry environments since moisture will cause them to rust.
    Bracket
    Mounting
    Holes
    Style
    Thread Size
    Thread
    Lg.
    Cap. per
    Mount, lb.
    Stud Drive
    Style
    Base
    Dia.
    Overall
    Ht.
    Wd.
    Dp.
    Ht.
    Material
    Fasteners
    Included
    No.
    of
    Dia.
    Pkg.
    Qty.
    Pkg.
    Steel Base and Zinc-Plated Steel Stud
    1M10 × 1.5 mm2 1/2"100Hex
    2"2 3/4"4 15/16"1 15/16"1 7/16"Zinc-Plated SteelYes43/16"26943K7000000
     
    Nylon Base and Zinc-Plated Steel Stud
    2M10 × 1.5 mm2 7/8"100Hex
    1 1/4"3 1/4"2 1/8"1 3/4"2 1/8"Zinc-Plated SteelYes43/16"46943K100000
    3M8 × 1.25 mm2 11/16"100Slotted
    1 5/16"3"1 3/8"1"1 5/8"Zinc-Plated SteelYes43/16"16943K30000
    4M8 × 1.25 mm2 11/16"100Slotted
    1 5/16"3"4 13/16"1 7/16"1 5/16"Zinc-Plated SteelYes43/16"16943K50000
     

    Swivel Leveling Mounts with Bracket

    Image of Product. With Corner Bracket. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Bracket, Corner Bracket, Without Cushion, 4 Mounting Holes.

    With Corner Bracket

    Image of Product. With Square Bracket. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Bracket, Square Bracket, Without Cushion, 4 Mounting Holes.

    With Square Bracket

    Image of Attribute. Corner Bracket. Top orientation. Contains Annotated. Swivel Leveling Mounts with Bracket, Corner Bracket.

    Corner Bracket

    Image of Attribute. Square Bracket. Top orientation. Contains Annotated. Swivel Leveling Mounts with Bracket, Square Bracket.

    Square Bracket

    Image of Specification. With Hex Socket Stud. Front orientation. ZoomedIn view. Contains Inset, Border. Hex Stud. Swivel Leveling Mounts with Bracket.

    With Hex Socket

    Stud

    Install these mounts on the bottom of equipment without feet using the heavy duty bracket. They have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. You can also use the bracket to make your equipment mobile by replacing the mount with a caster that has a threaded stem.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Aluminum Base—These mounts are lighter than stainless steel ones, reducing the overall weight of your machine. They withstand occasional exposure to moisture, but don't hold up in wet environments like stainless steel.
    Corner Bracket—These mounts cut across the corner of rails that join at a right angle, such as the structural framing rails used to build racks.
    Square Bracket—Fasten these mounts to the bottom of flat surfaces such as storage cabinets and lockers.
    Hex Stud—Turn the stud from above with a hex key to adjust the height without having to reach under your machine with a wrench.
    Leveling Mounts
    Replacement
    Brackets
    Bracket
    Mounting Holes
    Without Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Stud Drive
    Style
    Base
    Dia.
    Lg.
    Wd.
    Ht.
    Material
    Fasteners
    Included
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Each
    Aluminum Base and Zinc-Plated Steel Stud
     
    Corner Bracket
    1/2"-13
    3"25°1 7/8"4 3/8"4 3/8"1 1/16"Stainless Steel
    No45/16"1 1/2"5004 5/16"6577K270000006577K16000000
     
    Square Bracket
    1/2"-13
    3"25°1 7/8"3"3"1 1/16"Stainless Steel
    No45/16"2 3/8"5004 5/16"6577K23000006577K1200000
    5/8"-11
    3 1/2"25°2 3/8"3 7/8"3 7/8"1 1/4"Stainless Steel
    No43/8"3"1,0005 1/4"6577K25000006577K1400000
     
    303 Stainless Steel Base and 304 Stainless Steel Stud
     
    Corner Bracket
    1/2"-13
    3"25°1 7/8"4 3/8"4 3/8"1 1/16"Stainless Steel
    No45/16"1 1/2"1,0004 5/16"6577K36000006577K1600000
    5/8"-11
    3 1/2"25°2 3/8"6"6"1 1/4"Stainless Steel
    No43/8"2"1,0005 1/4"6577K380000006577K1800000
     
    Square Bracket
    1/2"-13
    3"25°1 7/8"3"3"1 1/16"Stainless Steel
    No45/16"2 3/8"5004 5/16"6577K32000006577K1200000
    5/8"-11
    3 1/2"25°2 3/8"3 7/8"3 7/8"1 1/4"Stainless Steel
    No43/8"3"1,0005 1/4"6577K34000006577K1400000
    3/4"-10
    4"25°2 7/8"3 7/8"3 7/8"1 1/4"Stainless Steel
    No43/8"3"1,5006"6577K390000006577K400000
     
    303 Stainless Steel Base and 416 Stainless Steel Stud
     
    Corner Bracket
    1/2"-13
    3"25°Hex
    1 7/8"4 3/8"4 3/8"1 1/16"Stainless Steel
    No45/16"1 1/2"5004 5/16"6577K45000006577K1600000
    3/4"-10
    4"25°Hex
    2 7/8"6"6"1 1/4"Stainless Steel
    No43/8"2"1,5006"6577K470000006577K4100000
     
    Square Bracket
    1/2"-13
    3"25°Hex
    1 7/8"3"3"1 1/16"Stainless Steel
    No45/16"2 3/8"5004 5/16"6577K42000006577K1200000
    5/8"-11
    3 1/2"25°Hex
    2 3/8"3 7/8"3 7/8"1 1/4"Stainless Steel
    No43/8"3"1,0005 1/4"6577K43000006577K1400000
    3/4"-10
    4"25°Hex
    2 7/8"3 7/8"3 7/8"1 1/4"Stainless Steel
    No43/8"3"1,5006"6577K440000006577K400000
     

    Press-Fit Leveling Mount Inserts

    Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.
    For Square Legs
    Image of ProductInUse. Front orientation. Leveling Mount Inserts. Press-Fit Leveling Mount Inserts, For Square Legs.
    Image of Attribute. Front orientation. Contains Annotated. Press-Fit Leveling Mount Inserts.
    Square inserts have flexible spring steel walls that grip the inside of the legs.
    For Leg
    Thread
    Outer
    Lg.
    Outer
    Wd.
    Inner
    Lg.
    Inner
    Wd.
    Cap. per
    Mount
    Overall
    Ht.
    Size
    Type
    Dp.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1"1"15/16"15/16"Not Rated1 1/16"1/4"-20
    UNC
    1/4"42417T2700000
    1"1"15/16"15/16"Not Rated1 1/16"5/16"-18
    UNC
    1/4"42417T280000
    1"1"15/16"15/16"Not Rated1 1/16"3/8"-16
    UNC
    1/4"42417T1100000
    1 1/4"1 1/4"1 3/16"1 3/16"Not Rated1 1/16"1/4"-20
    UNC
    1/4"42417T6100000
    1 1/4"1 1/4"1 3/16"1 3/16"Not Rated1 1/16"5/16"-18
    UNC
    1/4"42417T6200000
    1 1/4"1 1/4"1 3/16"1 3/16"Not Rated1 1/16"3/8"-16
    UNC
    1/4"42417T1200000
    1 1/2"1 1/2"1 7/16"1 7/16"Not Rated1 1/16"3/8"-16
    UNC
    1/4"42417T6300000
    1 1/2"1 1/2"1 7/16"1 7/16"Not Rated2 1/8"1/2"-13
    UNC
    1/2"12417T130000
    1 3/4"1 3/4"1 11/16"1 11/16"Not Rated2 1/16"1/2"-13
    UNC
    1/2"12417T1400000
    2"2"1 15/16"1 15/16"Not Rated2 1/16"1/2"-13
    UNC
    1/2"12417T1500000
     
    For Round Legs
    Image of ProductInUse. Front orientation. Leveling Mount Inserts. Press-Fit Leveling Mount Inserts, For Round Legs.
    Image of Attribute. Front orientation. Contains Annotated.
    Retaining clips hold the round inserts inside the legs.
    For
    Leg
    Thread
    ID
    OD
    Cap. per
    Mount
    Overall
    Ht.
    Size
    Type
    Dp.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    11/16"3/4"Not Rated5/8"1/4"-20
    UNC
    3/8"42417T2600000
    11/16"3/4"Not Rated5/8"5/16"-18
    UNC
    3/8"42417T2900000
    15/16"1"Not Rated9/16"3/8"-16
    UNC
    3/8"42417T1800000
    15/16"1"Not Rated5/8"1/4"-20
    UNC
    3/8"42417T1600000
    15/16"1"Not Rated5/8"5/16"-18
    UNC
    3/8"42417T1700000
    1 3/16"1 1/4"Not Rated5/8"1/4"-20
    UNC
    3/8"42417T1900000
    1 3/16"1 1/4"Not Rated5/8"5/16"-18
    UNC
    3/8"42417T2100000
    1 3/16"1 1/4"Not Rated5/8"3/8"-16
    UNC
    3/8"42417T2200000
    1 7/16"1 1/2"Not Rated5/8"1/4"-20
    UNC
    3/8"42417T2300000
    1 7/16"1 1/2"Not Rated5/8"5/16"-18
    UNC
    3/8"42417T2400000
    1 7/16"1 1/2"Not Rated5/8"3/8"-16
    UNC
    3/8"42417T2500000
    1 15/16"2"Not Rated3/8"3/8"-16
    UNC
    3/8"42417T3200000
    1 15/16"2"Not Rated5/8"1/4"-20
    UNC
    3/8"42417T3100000
    2 7/16"2 1/2"Not Rated5/8"3/8"-16
    UNC
    3/8"42417T3300000
     

    High-Capacity Press-Fit Leveling Mount Inserts

    Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.
    For Square Legs
    Image of ProductInUse. Shown with Brass Insert Installed. Front orientation. Leveling Mount Inserts. High-Capacity Press-Fit Leveling Mount Inserts, For Square Legs.

    Shown with

    Brass

    Insert

    Installed

    Plastic—The economical choice. These inserts can handle more weight than inserts with brass threads, but may wear out more quickly if frequently adjusted.
    Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.
    For Leg
    Thread
    Outer
    Lg.
    Outer
    Wd.
    Inner
    Lg.
    Inner
    Wd.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    , mm
    Size
    Type
    Dp.
    Temp.,
    ° F
    Each
    Plastic
    Image of Attribute. Front orientation. Contains Annotated. Press Fit.
    1 1/2"1 1/2"1 1/4"1 1/4"3,5001 3/4"3/8"-16
    UNC
    1 1/4"-20 to 1706675N3200000
    1 1/2"1 1/2"1 1/4"1 1/4"3,5001 3/4"1/2"-13
    UNC
    1 1/4"-20 to 1706675N420000
    1 1/2"1 1/2"1 1/4"1 1/4"3,5001 3/4"5/8"-11
    UNC
    1 1/4"-20 to 1706675N520000
    1 1/2"1 1/2"1 1/4"1 1/4"3,5001 3/4"3/4"-10
    UNC
    1 1/4"-20 to 1706675N620000
    1 1/2"1 1/2"1 3/8"1 3/8"3,5001 3/4"3/8"-16
    UNC
    1 1/4"-20 to 1706675N310000
    1 1/2"1 1/2"1 3/8"1 3/8"3,5001 3/4"1/2"-13
    UNC
    1 1/4"-20 to 1706675N410000
    1 1/2"1 1/2"1 3/8"1 3/8"3,5001 3/4"5/8"-11
    UNC
    1 1/4"-20 to 1706675N510000
    1 1/2"1 1/2"1 3/8"1 3/8"3,5001 3/4"3/4"-10
    UNC
    1 1/4"-20 to 1706675N610000
    2"2"1 3/4"1 3/4"3,5002"3/8"-16
    UNC
    1"-20 to 1706675N350000
    2"2"1 3/4"1 3/4"3,5002"1/2"-13
    UNC
    1"-20 to 1706675N450000
    2"2"1 3/4"1 3/4"3,5002"5/8"-11
    UNC
    1"-20 to 1706675N550000
    2"2"1 3/4"1 3/4"3,5002"3/4"-10
    UNC
    1"-20 to 1706675N650000
    2"2"1 7/8"1 7/8"3,5002"3/8"-16
    UNC
    1"-20 to 1706675N340000
    2"2"1 7/8"1 7/8"3,5002"1/2"-13
    UNC
    1"-20 to 1706675N440000
    2"2"1 7/8"1 7/8"3,5002"5/8"-11
    UNC
    1"-20 to 1706675N540000
    2"2"1 7/8"1 7/8"3,5002"3/4"-10
    UNC
    1"-20 to 1706675N640000
     
    Plastic with Brass Insert
    Image of Attribute. Front orientation. Contains Annotated. Press Fit.
    1"1"7/8"7/8"1,1001 3/16"3/8"-16
    UNC
    7/8"30 to 19560945K560000
    1"1"7/8"7/8"1,1001 3/16"1/2"-13
    UNC
    7/8"30 to 19560945K570000
    1 3/16"1 3/16"1 1/16"1 1/16"1,2001 5/16"3/8"-16
    UNC
    7/8"30 to 19560945K5800000
    1 1/2"1 1/2"1 1/4"1 1/4"1,0001 11/16"3/8"-16
    UNC
    3/4"30 to 19560945K2500000
    1 1/2"1 1/2"1 1/4"1 1/4"1,0001 11/16"1/2"-13
    UNC
    3/4"30 to 19560945K2600000
    1 1/2"1 1/2"1 1/4"1 1/4"1,0001 11/16"5/8"-11
    UNC
    15/16"30 to 19560945K2700000
    1 1/2"1 1/2"1 1/4"1 1/4"1,0001 11/16"3/4"-10
    UNC
    1 1/8"30 to 19560945K2800000
    1 1/2"1 1/2"1 1/4"1 1/4"1,5001 3/4"3/8"-12
    Acme
    1 1/4"-20 to 18060945K360000
    1 1/2"1 1/2"1 1/4"1 1/4"1,5001 3/4"1/2"-10
    Acme
    1 1/4"-20 to 18060945K370000
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"1.5M10
    Metric
    1"-20 to 18060945K750000
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"1.75M12
    Metric
    1"-20 to 18060945K760000
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"2M16
    Metric
    1"-20 to 18060945K770000
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"2.5M20
    Metric
    1"-20 to 18060945K780000
    1 1/2"1 1/2"1 3/8"1 3/8"1,0001 11/16"3/8"-16
    UNC
    3/4"30 to 19560945K2100000
    1 1/2"1 1/2"1 3/8"1 3/8"1,0001 11/16"1/2"-13
    UNC
    3/4"30 to 19560945K2200000
    1 1/2"1 1/2"1 3/8"1 3/8"1,0001 11/16"5/8"-11
    UNC
    15/16"30 to 19560945K2300000
    1 1/2"1 1/2"1 3/8"1 3/8"1,0001 11/16"3/4"-10
    UNC
    1 1/8"30 to 19560945K2400000
    2"2"1 3/4"1 3/4"1,0001 15/16"3/8"-16
    UNC
    3/4"30 to 19560945K2900000
    2"2"1 3/4"1 3/4"1,0001 15/16"1/2"-13
    UNC
    3/4"30 to 19560945K3100000
    2"2"1 3/4"1 3/4"1,0001 15/16"5/8"-11
    UNC
    15/16"30 to 19560945K3200000
    2"2"1 3/4"1 3/4"1,7601 15/16"3/4"-10
    UNC
    1 1/8"30 to 19560945K3300000
    2"2"1 3/4"1 3/4"2,0002"3/8"-12
    Acme
    1"-20 to 18060945K380000
    2"2"1 3/4"1 3/4"2,0002"1/2"-10
    Acme
    1"-20 to 18060945K390000
    2"2"1 3/4"1 3/4"2,0002"1.5M10
    Metric
    1"-20 to 18060945K790000
    2"2"1 3/4"1 3/4"2,0002"1.75M12
    Metric
    1"-20 to 18060945K810000
    2"2"1 3/4"1 3/4"2,0002"2M16
    Metric
    1"-20 to 18060945K820000
    2"2"1 3/4"1 3/4"2,0002"2.5M20
    Metric
    1"-20 to 18060945K830000
    2"2"1 7/8"1 7/8"1,0001 15/16"3/8"-16
    UNC
    3/4"30 to 19560945K5200000
    2"2"1 7/8"1 7/8"1,0001 15/16"1/2"-13
    UNC
    3/4"30 to 19560945K5300000
    2"2"1 7/8"1 7/8"1,0001 15/16"5/8"-11
    UNC
    15/16"30 to 19560945K5400000
    2"2"1 7/8"1 7/8"1,7601 15/16"3/4"-10
    UNC
    1 1/8"30 to 19560945K5500000
     
    For Rectangular Legs
    Image of ProductInUse. Shown with Brass

Insert Installed. Front orientation. Leveling Mount Inserts. High-Capacity Press-Fit Leveling Mount Inserts, For Rectangular Legs.
    Image of Attribute. Front orientation. Contains Annotated. Press Fit.

    Shown with

    Brass Insert

    Installed

    Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.
    For Leg
    Thread
    Outer
    Lg.
    Outer
    Wd.
    Inner
    Lg.
    Inner
    Wd.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Size
    Type
    Dp.
    Temp.,
    ° F
    Each
    Plastic with Brass Insert
    3"2"2 3/4"1 3/4"1,7601 15/16"5/8"-11
    UNC
    15/16"30 to 19560945K49000000
    3"2"2 3/4"1 3/4"1,7601 15/16"3/4"-10
    UNC
    1 1/8"30 to 19560945K5100000
     
    For Round Legs
    Image of ProductInUse. Shown with Brass Insert Installed. Front orientation. Leveling Mount Inserts. High-Capacity Press-Fit Leveling Mount Inserts, For Round Legs.
    Image of Attribute. Front orientation. Contains Annotated.

    Shown

    with

    Brass

    Insert

    Installed

    Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.
    For
    Leg
    Thread
    ID
    OD
    Cap. per
    Mount, lb.
    Overall
    Ht.
    , mm
    Size
    Type
    Dp.
    Temp.,
    ° F
    Each
    Plastic with Brass Insert
    1 5/16"1 1/2"1,5001 11/16"1.5M10
    Metric
    1"-20 to 18060945K9100000
    1 5/16"1 1/2"1,5001 11/16"1.75M12
    Metric
    1"-20 to 18060945K920000
    1 5/16"1 1/2"1,5001 11/16"2M16
    Metric
    1"-20 to 18060945K930000
    1 3/8"1 1/2"1,0001 11/16"3/8"-16
    UNC
    3/4"30 to 19560945K1300000
    1 3/8"1 1/2"1,0001 11/16"1/2"-13
    UNC
    3/4"30 to 19560945K1400000
    1 3/8"1 1/2"1,0001 11/16"5/8"-11
    UNC
    15/16"30 to 19560945K1500000
    1 3/8"1 1/2"1,0001 11/16"3/4"-10
    UNC
    1 1/8"30 to 19560945K4200000
    1 9/16"1 11/16"1,0001 11/16"3/8"-16
    UNC
    7/8"30 to 19560945K8400000
    1 9/16"1 11/16"1,0001 11/16"1/2"-13
    UNC
    7/8"30 to 19560945K8500000
    1 9/16"1 11/16"1,0001 11/16"5/8"-11
    UNC
    7/8"30 to 19560945K8600000
    1 11/16"1 15/16"1,0001 15/16"3/8"-16
    UNC
    3/4"30 to 19560945K6500000
    1 11/16"1 15/16"1,0001 15/16"1/2"-13
    UNC
    3/4"30 to 19560945K6600000
    1 11/16"1 15/16"1,0001 15/16"5/8"-11
    UNC
    15/16"30 to 19560945K6700000
    1 11/16"1 15/16"1,7601 15/16"3/4"-10
    UNC
    1 1/8"30 to 19560945K6800000
    1 11/16"2"2,0001 15/16"3/8"-16
    UNC
    1"30 to 19560945K4110000
    1 11/16"2"2,0001 15/16"1/2"-13
    UNC
    1"30 to 19560945K4120000
    1 13/16"2"2,0001 15/16"1.5M10
    Metric
    1"-20 to 18060945K950000
    1 13/16"2"2,0001 15/16"1.75M12
    Metric
    1"-20 to 18060945K960000
    1 13/16"2"2,0001 15/16"2M16
    Metric
    1"-20 to 18060945K970000
    1 13/16"2"2,0001 15/16"2.5M20
    Metric
    1"-20 to 18060945K980000
    1 7/8"2"2,0001 15/16"3/8"-16
    UNC
    1"30 to 19560945K4130000
    1 7/8"2"2,0001 15/16"1/2"-13
    UNC
    1"30 to 19560945K4140000
    1 7/8"2"2,0001 15/16"5/8"-11
    UNC
    1"30 to 19560945K4150000
    1 15/16"2"1,0001 15/16"3/8"-16
    UNC
    3/4"30 to 19560945K1600000
    1 15/16"2"1,0001 15/16"1/2"-13
    UNC
    3/4"30 to 19560945K1700000
    1 15/16"2"1,0001 15/16"5/8"-11
    UNC
    15/16"30 to 19560945K4600000
    1 15/16"2"1,7601 15/16"3/4"-10
    UNC
    1 1/8"30 to 19560945K4800000
    2 1/4"2 3/8"1,7001 15/16"5/8"-11
    UNC
    1 1/2"30 to 19560945K8800000
     

    Weld-On Leveling Mount Inserts

    Weld these inserts to the end of tubular legs to attach threaded leveling mounts and casters. They create a more secure connection than press-fit inserts.
    For Square Legs
    Image of Product. Front orientation. Leveling Mount Inserts. Weld-On Leveling Mount Inserts.
    For
    Leg
    Thread
    Outer
    Lg.
    Outer
    Wd.
    Cap. per
    Mount
    Ht.
    Size
    Type
    Each
    Steel
    1"1"Not Rated1/4"3/8"-16
    UNC
    8856N11000000
    1"1"Not Rated1/4"1/2"-13
    UNC
    8856N1400000
    1"1"Not Rated1/4"5/8"-11
    UNC
    8856N1700000
    1"1"Not Rated1/4"3/4"-10
    UNC
    8856N2100000
    1 1/2"1 1/2"Not Rated1/4"3/8"-16
    UNC
    8856N1200000
    1 1/2"1 1/2"Not Rated1/4"1/2"-13
    UNC
    8856N1500000
    1 1/2"1 1/2"Not Rated1/4"5/8"-11
    UNC
    8856N1800000
    1 1/2"1 1/2"Not Rated1/4"3/4"-10
    UNC
    8856N2200000
    2"2"Not Rated1/4"3/8"-16
    UNC
    8856N1300000
    2"2"Not Rated1/4"1/2"-13
    UNC
    8856N1600000
    2"2"Not Rated1/4"5/8"-11
    UNC
    8856N1900000
    2"2"Not Rated1/4"3/4"-10
    UNC
    8856N2300000
     
    back to top