M6 Levels | McMaster-Carr

				Overall		Display	Mounting Holes
Screw On


-30° to 30°	±0.05°	0.01°	4 1/2"	1"	2 5/8"	Stainless Steel	Graphic	LCD	4	M6 x 1 mm	Yes	Rechargeable	Carrying Case	V-Groove	0000000	0000000

Swivel Leveling Mounts with Threaded Stud

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Nickel-Plated Steel Base and Stud



		M6 × 1 mm	25	7.5°	19	690	38	00000000	00000	510	41	Natural Rubber	00000000	00000


		Zinc-Yellow-Chromate-Plated Steel Base and Stud



				M6 × 1 mm	25	7.5°	19	690	38	0000000	0000	515	41	Natural Rubber	0000000	0000


				303 Stainless Steel Base and Stud



						M6 × 1 mm	25	7.5°	19	690	38	0000000	00000	510	41	Natural Rubber	00000000	00000


						316 Stainless Steel Base and Stud



								M6 × 1 mm	25	7.5°	19	690	38	0000000	00000	—	—	—	———	0

Rigid Leveling Mounts with Threaded Stud

Style 1

Style 3

Style 6

Level equipment on uneven floors. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Zinc-Plated Steel Base—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

	Thread Size	Thread Lg., mm	Cap. per Mount, lb.	Base Dia., mm	Overall Ht., mm	Cushion Material	Pkg. Qty.		Pkg.
Zinc-Plated Steel Base and Stud with Rubber Cushion



	1	M6 × 1 mm	38	250	30	57	Neoprene	1	0000000	00000


	Zinc-Plated Steel Base and Stud with Plastic Cushion



			1	M6 × 1 mm	38	250	30	57	Nylon	1	00000000	0000


			303 Stainless Steel Base and Stud with Rubber Cushion



					1	M6 × 1 mm	38	250	30	57	Neoprene	1	0000000	0000


					303 Stainless Steel Base and Stud with Plastic Cushion



							1	M6 × 1 mm	38	250	30	57	Nylon	1	00000000	0000


							Nylon Base and Stud



									3	M6 × 1 mm	25	75	30	39	—	4	0000000	0000


									3	M6 × 1 mm	40	75	30	54	—	4	0000000	0000
									3	M6 × 1 mm	60	75	30	74	—	4	0000000	0000


									Nylon Base and Zinc-Plated Steel Stud



											6	M6 × 1 mm	34	335	25	45	—	4	0000000	0000

Threaded-Stud Bumpers

Style 1

These bumpers absorb impact to protect equipment, walls, and floors from dents and scuffs. They're found everywhere from access panels to the bases of equipment. The rubber construction also stifles noise and absorbs vibration to prevent wear and tear to your machinery and nearby surfaces. No separate fasteners are needed—just twist them into a threaded hole.

Multipurpose SBR Rubber About Multipurpose SBR Rubber

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg.	OD	Ht.	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Nonmarking	For Use Outdoors	Pkg. Qty.		Pkg.
Style 1



		M6	1/4"	3/4"	3/8"	Durometer 70A	Hard	Black	0 to 220	Steel	Yes	No	10	0000000	000000


		M6	1/2"	1"	7/16"	Durometer 70A	Hard	Black	0 to 220	Steel	Yes	No	10	0000000	00000

Load-Rated Reinforced Threaded-Stud Bumpers


Style 1	Style 2	Style 7

These bumpers are tested to ensure they'll support the load of your application. They'll bear the weight of everything from a 50-pound saw to a 5,000-pound air compressor. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. No separate fasteners are needed—just twist them into a threaded hole.

Natural Rubber with Steel Stud and Base Plate


Style 1	Style 2

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	18	20	10	140	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	00000


		M6 × 1 mm	18	20	10	210	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	20	15	100	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	20	15	150	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	20	20	80	Durometer 55A	Medium	Black	-40 to 170	No	No	0000000	0000
		M6 × 1 mm	18	20	20	180	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	20	30	90	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	20	30	190	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	25	15	130	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	0000
		M6 × 1 mm	18	25	15	360	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	25	20	120	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	0000


		M6 × 1 mm	18	25	20	310	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	25	30	110	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	0000
		M6 × 1 mm	18	25	30	260	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000


		Style 2



				M6 × 1 mm	18	20	15	40	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	0000


				M6 × 1 mm	18	20	15	70	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000
				M6 × 1 mm	18	20	24	22	Durometer 50A	Medium	Black	-10 to 150	No	No	0000000	0000
				M6 × 1 mm	18	20	24	70	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000
				M6 × 1 mm	18	25	20	40	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	0000
				M6 × 1 mm	18	25	20	110	Durometer 70A	Hard	Black	-40 to 170	No	No	00000000	0000

Natural Rubber with Corrosion-Resistant Stainless Steel Stud and Base Plate


Style 1	Style 2

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Unlike bumpers with steel studs, these handle repeated washdowns without corroding.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	18	20	10	140	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	00000


		M6 × 1 mm	18	20	15	100	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	20	20	80	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	0000
		M6 × 1 mm	18	20	30	90	Durometer 55A	Medium	Black	-40 to 170	No	No	0000000	0000
		M6 × 1 mm	18	25	15	130	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	0000
		M6 × 1 mm	18	25	20	120	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	0000
		M6 × 1 mm	18	25	30	110	Durometer 50A	Medium	Black	-10 to 150	No	No	000000000	0000


		Style 2



				M6 × 1 mm	18	20	15	40	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	0000


				M6 × 1 mm	18	20	24	25	Durometer 55A	Medium	Black	-40 to 170	No	No	00000000	0000

Oil-Resistant Buna-N with Steel Stud and Base Plate

Style 7

These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht.	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 7



		M6 × 1 mm	8	25	13/16"	90	Durometer 55A	Medium	Black	-20 to 170	No	No	00000000	00000


		M6 × 1 mm	12	25	13/16"	90	Durometer 55A	Medium	Black	-20 to 170	No	No	00000000	0000
		M6 × 1 mm	25	25	13/16"	90	Durometer 55A	Medium	Black	-20 to 170	No	No	00000000	0000

Oil-Resistant Buna-N with Corrosion-Resistant Stainless Steel Stud and Base Plate

Style 7

These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.

Unlike bumpers with steel studs, these handle repeated washdowns without corroding.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht.	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 7



		M6 × 1 mm	8	25	13/16"	90	Durometer 55A	Medium	Black	-20 to 170	No	No	00000000	00000


		M6 × 1 mm	12	25	13/16"	90	Durometer 55A	Medium	Black	-20 to 170	No	No	00000000	0000
		M6 × 1 mm	25	25	13/16"	90	Durometer 55A	Medium	Black	-20 to 170	No	No	00000000	0000

High-Temperature Silicone Rubber with Steel Stud and Base Plate

Style 1

Keep their shape and strength at higher temperatures than any of our other rubber bumpers.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	13	25	19	25	Durometer 30A	Soft	Black	-80 to 300	Yes	Yes	0000000	00000


		M6 × 1 mm	13	25	19	35	Durometer 40A	Medium Soft	Green	-80 to 300	Yes	Yes	0000000	0000
		M6 × 1 mm	13	25	19	50	Durometer 50A	Medium	Orange	-80 to 300	Yes	Yes	0000000	0000
		M6 × 1 mm	13	25	19	65	Durometer 60A	Medium Hard	Orange	-80 to 300	Yes	Yes	0000000	0000
		M6 × 1 mm	13	25	19	90	Durometer 70A	Hard	Orange	-80 to 300	Yes	Yes	0000000	0000

Swivel Leveling Mounts with Threaded Hole

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Dp., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Nickel-Plated Steel Base



		M6 × 1 mm	4.3	7.5°	19	690	13	00000000	00000	515	16	Natural Rubber	00000000	00000


		Zinc-Yellow-Chromate-Plated Steel Base



				M6 × 1 mm	4	7.5°	19	690	13	0000000	0000	515	16	Natural Rubber	0000000	0000


				303 Stainless Steel Base



						M6 × 1 mm	4.3	7.5°	19	690	13	0000000	00000	515	16	Neoprene	0000000	00000

Load-Rated Reinforced Threaded-Hole Bumpers


Style 1	Style 2	Style 3	Style 4

These bumpers are tested to ensure they'll support the load of your application. They'll bear the weight of everything from a 50-pound saw to a 2,000-pound air compressor. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Natural Rubber with Steel Base Plate


Style 1	Style 2

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	6	20	15	65	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	00000000	00000


		M6 × 1 mm	6	20	15	100	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	20	15	150	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	20	20	80	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	20	20	180	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	20	25	60	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	20	25	85	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	20	25	230	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	25	15	130	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	0000
		M6 × 1 mm	6	25	15	360	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	25	20	120	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	0000


		M6 × 1 mm	6	25	20	310	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	25	30	65	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	25	30	110	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	0000
		M6 × 1 mm	6	25	30	260	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	0000


		Style 2



				M6 × 1 mm	6	20	15	29	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	00000000	0000


				M6 × 1 mm	6	20	24	18	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	00000000	0000
				M6 × 1 mm	6	20	24	22	Durometer 55A	Medium	Black	-20 to 150	Yes	No	0000000	0000
				M6 × 1 mm	6	20	24	70	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	0000
				M6 × 1 mm	6	25	20	42	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	0000
				M6 × 1 mm	6	25	20	110	Durometer 70A	Hard	Black	-40 to 170	Yes	No	00000000	0000

Natural Rubber with Corrosion-Resistant Stainless Steel Base Plate

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	6	20	15	100	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	00000


		M6 × 1 mm	6	20	25	85	Durometer 55A	Medium	Black	-40 to 170	Yes	No	00000000	0000
		M6 × 1 mm	6	25	15	130	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	0000
		M6 × 1 mm	6	25	20	120	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	0000
		M6 × 1 mm	6	25	30	110	Durometer 55A	Medium	Black	-20 to 150	Yes	No	000000000	0000

Abrasion-Resistant Polyurethane Rubber with Steel Base Plate

Style 3

Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 3



		M6 × 1 mm	9	38	25	18	Durometer 70 OO	Soft	Black	-20 to 160	No	No	0000000	000000


		M6 × 1 mm	9	45	22	20	Durometer 50 OO	Extra Soft	Black	-20 to 160	No	No	0000000	00000
		M6 × 1 mm	9	45	22	35	Durometer 70 OO	Soft	Black	-20 to 160	No	No	0000000	00000

Oil-Resistant Buna-N with Steel Base Plate

Style 4

These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 4



		M6 × 1 mm	6	25	21	95	Durometer 55A	Medium	Black	-20 to 170	Yes	No	00000000	00000

High-Temperature Silicone Rubber with Steel Base Plate

Style 3

Keep their shape and strength at higher temperatures than any of our other rubber bumpers.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 3



		M6 × 1 mm	6	25	19	25	Durometer 30A	Soft	Black	-80 to 300	Yes	Yes	0000000	00000


		M6 × 1 mm	6	25	19	35	Durometer 40A	Medium Soft	Green	-80 to 300	Yes	Yes	0000000	0000
		M6 × 1 mm	6	25	19	50	Durometer 50A	Medium	Orange	-80 to 300	Yes	Yes	0000000	0000
		M6 × 1 mm	6	25	19	65	Durometer 60A	Medium Hard	Orange	-80 to 300	Yes	Yes	0000000	0000
		M6 × 1 mm	6	25	19	90	Durometer 70A	Hard	Orange	-80 to 300	Yes	Yes	000000	0000

Reinforced Threaded-Hole Bumpers

Style 1

With a metal core or base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Core Material	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	6	19	16	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	00000000	00000


		M6 × 1 mm	6	19	16	Durometer 70A	Hard	Black	-40 to 200	Steel	No	Yes	00000000	0000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Core Material	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	6	19	16	Durometer 30A	Soft	Red	-40 to 200	Steel	No	Yes	00000000	00000


		M6 × 1 mm	6	19	16	Durometer 40A	Medium Soft	Red	-40 to 200	Steel	No	Yes	0000000	0000
		M6 × 1 mm	6	19	16	Durometer 50A	Medium	Red	-40 to 200	Steel	No	Yes	00000000	0000
		M6 × 1 mm	6	19	16	Durometer 60A	Medium Hard	Black	-40 to 200	Steel	No	Yes	00000000	0000
		M6 × 1 mm	6	19	16	Durometer 85A	Hard	Red	-40 to 200	Steel	No	Yes	00000000	0000
		M6 × 1 mm	6	19	16	Durometer 95A	Extra Hard	Black	-40 to 200	Steel	No	Yes	00000000	0000

Reinforced Threaded-Stud Bumpers

Style 1

With a metal core for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. No separate fasteners are needed—just twist them into a threaded hole.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Core Material	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	18	19	16	34	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Steel	Yes	Yes	00000000	000000


		M6 × 1 mm	18	19	16	34	Durometer 70A	Hard	Black	-40 to 200	Steel	Steel	Yes	Yes	00000000	0000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Core Material	Nonmarking	For Use Outdoors		Each
Style 1



		M6 × 1 mm	18	19	16	34	Durometer 40A	Medium Soft	Red	-60 to 200	Steel	Steel	Yes	Yes	0000000	000000


		M6 × 1 mm	18	19	16	34	Durometer 80A	Hard	Red	-60 to 200	Steel	Steel	Yes	Yes	00000000	0000

Email Us

Digital Horizontal-Plane Angle Indicators

Swivel Leveling Mounts with Threaded Stud

Rigid Leveling Mounts with Threaded Stud

Threaded-Stud Bumpers

Load-Rated Reinforced Threaded-Stud Bumpers

Swivel Leveling Mounts with Threaded Hole

Load-Rated Reinforced Threaded-Hole Bumpers

Reinforced Threaded-Hole Bumpers

Reinforced Threaded-Stud Bumpers

				Overall				Display		Mounting Holes
	Angle Measured Range	Accuracy	Angle Numeric Increments	Lg.	Wd.	Ht.	Material	Screen Type	Type	No. of	Thread Size	Batteries Included	Battery Type	Container Type	Features		Each
Screw On



		-30° to 30°	±0.05°	0.01°	4 1/2"	1"	2 5/8"	Stainless Steel	Graphic	LCD	4	M6 x 1 mm	Yes	Rechargeable	Carrying Case	V-Groove	0000000	0000000