Also known as clamping handles, use these standard adjustable handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments in areas with limited vertical space. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

An easy-to-grip ball knob makes these handles a good replacement for gear levers. Use them to operate machinery.

Use these handles as grips on hand wheels and cranks to operate machinery.

These handles are often used as grips on hand wheels or cranks to operate machinery around food processing lines without the risk of contaminating the food. Install them on a threaded stud.

Also known as quill-feed handles, these handles engage and disengage with a flick of the wrist to speed machining operations—especially when drilling deep holes.

Use these standard cam handles for most clamping applications. Push down on the handle and the head applies pressure to quickly draw two parts together for fast adjustments.

Add a pin, rod-end bolt, or other mounting hardware to build a custom assembly. Also known as double cams, these handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together.

Round long shafts can pass through these handles for mounting versatility. Create custom threads or drill a hole in the side of the hub to secure with a set screw. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

Mill specific holes or keyways in the hub to meet your specifications or weld in place. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

A combination ratchet arm and revolving-grip crank handle makes frequent machinery adjustments in tight spaces fast and easy.

Control these flexible, ready-to-use cables with the attached trigger-style spring-return lever. Weave them around obstructions to operate valves, throttle controls, and HVAC damper controls from a distance.

Pull and turn the knob to lock, so it's secure in applications where severe vibration is a concern. Flexible for weaving around obstructions, these ready-to-use cables operate valves, throttle controls, and HVAC damper controls from a distance.

A splined core limits contact points on the cable’s liner, so the core slides back and forth smoothly and keeps the cable from twisting. Pair these cables with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.

Push or pull the plunger to hold your workpiece from the side.

Secure your workpiece from the side by fully extending the plunger, and push a lever to lock the handle in place.

Hold workpieces of different thicknesses without adjustment.

Moving parts are sealed to prevent dirt and dust from clogging the clamp.

Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side.

The plunger can be locked at any position along its travel.

Mount these clamps to a bench top or other surface to keep workpieces in place.

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

Hold workpieces of different thicknesses without adjustment.

Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.

Two sets of mounting holes allow mounting on the bottom or side.

Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.

These clamps have mounting holes on the bottom.

Fit the draw arm over a latch plate and pull the handle to clamp.

Mount the clamp on a lid and the latch plate on the side of a container.

The spring-loaded tips on these clamps swivel in all directions to make maximum contact with angled and uneven workpieces.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.

For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps.

Pull the handle to lock the jaw in place and prevent loosening caused by vibration.

Hold up to five times the capacity of standard bar clamps. These are also known as I-beam clamps.

Place the arms on a pipe that is threaded at one end and at least 12" long to create your own bar clamp.

The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Pull the handle to lock or release the clamping arm.

Screw these clamps directly into a tapped hole in a fixture.

To prevent accidental opening, these have a safety catch.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

To prevent accidental opening, these latches have a safety catch.

These latches have a safety catch to prevent accidental opening.

A safety catch prevents accidental opening.

The latch arm is coated with vinyl so it won't scratch surfaces.

To prevent accidental opening, these latches have a safety catch.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

Adjust the latching distance to compensate for gasketing and misalignment.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are DGUV tested to meet European regulations for use with food.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

The mounting screws on these locks are concealed to prevent tampering.

A master key opens all of these locks, which also have their own unique keys.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

The mounting screws on these locks are concealed to prevent tampering.

These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.