Also known as turret lights, these fixtures have uplight or downlight reflectors to direct light.

Also known as troffers, these lights fit most standard drop-ceiling grids.

Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.

Also known as pendant lights, these fixtures hang from a cord.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

These lights are rated for protection against high-pressure washdowns. They have a sealed lens.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Mount lights in recessed spaces so the lens is flush with the wall.

Connect the hooks to a fixture to suspend lights from the ceiling.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.

Heads adjust to any angle to direct light where needed.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

No need for wiring—these lights plug-in with a three-prong plug.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Create a high-intensity lighting system for inspecting small and microscopic parts.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.

Use these with portable lights that use screw-in bulbs.

These lights are rated for environments where hazardous material is present.

The gooseneck arm on these lights allows you to direct light exactly where it's needed. They have a reflector that distributes light more evenly than other portable lights.

These IP44 lights are sealed to protect them against splashing water from any angle. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

Compact and easy to carry, these lights are IP44 rated for protection against splashing water from all angles. The head adjusts head up and down to direct light where it's needed.

An adjustable head moves up and down to let you aim light where it's needed most. These floodlights are small and easy to carry to job sites that don't have electrical power.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Connect the battery pack to your existing fluorescent light to convert it into an emergency backup light.

No need for wiring—these lights plug-in with a two-prong plug.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

Block out stray and unwanted light.

Reduce the glare from reflective surfaces.

Lock bulbs in place to prevent vibration from shaking them loose.

Turn an overhead outlet or an extension cord into a temporary light. These sockets have a two-prong plug for a quick connection.

Connect lamp components and conceal wires.

Stop vibration from shaking tubular fluorescent and LED bulbs loose.

Use these extenders when bulbs are too short to fit into deep or recessed fixtures.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Use these bulbs in standard sockets, panels, and appliances.

A sealing gasket keeps out oil and other contaminants.

Illuminate warehouses, factories, and arenas with the bright, white light of these metal halide light bulbs.

Insert removers into broken bulbs and twist to take the bulbs out. A built-in tray collects the glass shards.

These filters fit over miniature light bulbs with a bulb diameter up to 7/16".

These ballasts are often found in older installations.

In addition to being more energy-efficient than magnetic ballasts, these are lighter and quieter.

Pair these starters with ballasts.

Heat objects from up to 8 ft. away.

Turn a light socket into a radiant heater. These lamps generate heat with a ceramic element rather than an infrared bulb.

Position the lamp at any angle to heat, dry, soften, or defrost.

Designed for UV curing of small areas, these lamps also aid in leak detection, quality control inspection, and testing.

Use these cordless lamps for UV curing as well as leak detection, quality control inspection, and testing.

When motion is detected from both directions at a two-way corner, these lights flash to alert personnel and prevent collisions.

These versatile lights can be secured in the stand or removed for hand-held use.

These lights have two UV bulbs and two fluorescent bulbs that work independently of each other.

Lock the adjustable arm into position to maintain a steady view even near vibrating machinery.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing

Fluorescent magnifiers produce a cool, even, white light.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

Use where electrostatic discharge is a concern.

The lamp and the lens are mounted on separate arms to provide ultimate flexibility. Bend the neck to any position and it will stay in place.