Lint-Free Gloves | McMaster-Carr

Filter by

Material

Aramid Fabric

Carbon Fiber/Nylon Fabric

Application

Clothing Size

Cuff Style

Color

Cotton Weight

Length

Lining Material

Number of Gloves Included

5 Pair

12 Pair

Glove Size

Coating Coverage

Performance

Maximum Temperature

RoHS

REACH

Texture

Export Control Classification Number (ECCN)

1A995

EAR99

DFARS Specialty Metals

Exempt

ANSI Cut Rating

For Use With

Heptane

Sodium Hydroxide (Caustic Soda)

Hemming

Coating Material

Clean Room Standard

Specifications Met

Surface Resistance

1× 10^6 ohm to 1× 10^8 ohm

Knitting Gauge

97 Products

About Glove Sizing

Cotton with Open Cuff

Nylon with Open Cuff

Nylon with Knit Cuff

Keep fingerprints and other contaminants off of parts during inspections.

Cotton gloves are soft and comfortable.

Nylon gloves are stretchable and more form fitting than standard cotton inspection gloves.

Gloves with open cuffs are more convenient to put on and take off than other gloves. Use gloves with knit cuffs for a secure fit.

Available Sizes
Size	Glove Size
XS	6
S	7
M	8
L	9
XL	10

Cotton Fabric
Cotton Weight	Lg.	Cuff Style	Hemming	Color	Number of Gloves Included	Choose a Size		Pkg.
Light	9"	Open	Unhemmed	White	12 Pairs	S, L, XL	000000	00000
Light	14"	Open	Unhemmed	White	12 Pairs	L	000000	00000
Medium	8 1/2"	Open	Unhemmed	White	12 Pairs	S, L, XL	000000	00000
Heavy	8 1/2"	Open	Unhemmed	White	12 Pairs	S, L	000000	00000
Nylon Fabric
__	8 1/4"	Open	Hemmed	White	12 Pairs	XS, M, L	0000000	00000
__	9 1/4"	Knit	Unhemmed	White	5 Pairs	L	0000000	0000

Extreme-Temperature Clean Room Gloves

Aramid Fabric

Silicone Rubber

Often worn when stress-testing semiconductors—where parts go from freezer to furnace—these gloves won't contaminate your clean room. They’re cleaned and bagged in environments with low levels of particulates. These gloves also give you more dexterity when handling items than the basic pinching you get with mitts. Plus, they're ambidextrous, so you can wear them on either hand to extend their life.

Aramid fabric gloves have a wider temperature range than silicone rubber gloves. Even at 1000° F, they won’t burn or leave a residue. These gloves should only be used to handle dry objects.

Silicone rubber gloves meet EN 374 standards for protection against chemicals. And unlike aramid fabric gloves, they can be used to handle wet material.

Available Sizes
Size	Glove Size
L	9
XL	10

Aramid Fabric
Min. Temp., °F	Max. Temp., °F	For Heat Exposure Type	Environmental Rating	Lining Material	Lg.	Color	For Use With	Specifications Met	Choose a Size		Pair
-210°	1,000°	Direct	Fed. Std. Class 100, ISO Class 5	Nylon Fabric	14"	Yellow	__	__	L, XL	0000000	0000000
Silicone Rubber
-75°	390°	Direct	Fed. Std. Class 100, ISO Class 5	Nylon Fabric	15"	White	Heptane, Sodium Hydroxide, Sulfuric Acid	EN 374 Type B (JKL)	L, XL	00000000	000000
-75°	390°	Direct	Fed. Std. Class 100, ISO Class 5	Nylon Fabric	23"	White	Heptane, Sodium Hydroxide, Sulfuric Acid	EN 374 Type B (JKL)	L	00000000	000000

Cut-Protection Clean Room Gloves

These gloves meet ANSI/ISEA 105 standards for cut resistance, which designate levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade. Cleaned and bagged in environments with low levels of particulates, these lint-free, unlined gloves won't contaminate your work area.

Available Sizes
Size	Glove Size
XS	6
S	7
M	8
L	9
XL	10
2XL	11

Polyurethane-Rubber-Coating Dyneema Fabric
Environmental Rating	Cut Resistance	Texture	Thick., mil	Lg.	Color	Specifications Met	Choose a Size		Pair
Fed. Std. Class 100	ANSI Level A2	Smooth	48	9 1/2"	Gray	ANSI/ISEA 105	XS, S, M, L, XL, 2XL	0000000	000000

Low-Linting Cut-Protection Gloves

Minimize fabric contamination with these low-linting gloves. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Available Sizes
Size	Glove Size
S	7
M	8
L	9

							Pair
Cut Resistance	Lg.	Cuff Style	Color	Specifications Met	Choose a Size		1-11	12-Up
Kevlar Aramid Fabric
ANSI Level A4	9 1/2"	Knit	Yellow	ANSI/ISEA 105	S, M, L	0000000	00000	00000

Static-Dissipative Gloves

No Coating

Palm Coating

Full Coating

Made with conductive fibers, these gloves safely drain static electricity to prevent damage to sensitive electronic parts.

Nitrile-rubber-coated gloves are more durable than gloves coated with polyurethane. Polyurethane-rubber-coated gloves are thin and lightweight. Use them for assembly work, small parts handling, and other jobs that require a sensitive touch. They’re fully coated to keep liquids out, so your hands stay dry.

Textured gloves give you extra grip on wet or oily objects. Smooth gloves are grippy enough to handle dry objects. They allow for more precise handling than textured gloves.

Gloves that meet ANSI/ISEA 105 standards are rated for various forms of protection, such as resistance to cuts, abrasions, or punctures. The higher the rating, the more protection.

Gloves that meet EN 388 adhere to European standards for resistance to abrasions, tears, cuts, and punctures. This rating is similar to ANSI/ISEA 105.

Gloves with EN 16350 certifications are safe to use in areas where there's a risk of explosion or flammability, also known as ATEX zones.

Available Sizes
Size	Glove Size
XS	6
S	7
M	8
L	9
XL	10
2XL	11

								ANSI
Texture	Coating Coverage	Knitting Gauge	Lg.	Cuff Style	Touchscreen Compatible	Color	Surface Resistance	Cut Rating	Abrasion Rating	Puncture Rating	Specifications Met	Choose a Size		Pair
Nylon Fabric
Textured	__	13	9"	Knit	No	Gray	5.6 × 10⁶ ohms	__	__	__	__	S, M, L	0000000	00000
Nitrile-Rubber-Coated Polyester Fabric
Smooth	Palm	13	9 1/2"	Knit	Yes	Gray/Black	2.9 × 10⁵ ohms	__	__	__	EN 388 (4111A), EN 16350	S, M, L, XL, 2XL	00000000	0000
Nitrile-Rubber-Coated Nylon Fabric
Smooth	Palm	21	9 3/4"	Knit	Yes	Black	1 × 10⁸ ohms	A1	3	2	ANSI/ISEA 105, EN 388 (3121A), EN 16350	XS, S, M, L, XL, 2XL	00000000	0000
Polyurethane-Rubber-Coated Nylon Fabric
Smooth	Full	18	10"	Knit	Yes	Black/Blue	1 × 10⁸ ohms	__	3	2	ANSI/ISEA 105, EN 388 (3111XX)	XS, S, M, L, XL, 2XL	00000000	0000
Polyurethane-Rubber-Coated Polyethylene Fabric
Smooth	Full	18	10"	Knit	Yes	Black	1 × 10⁹ ohms	A3	1	3	ANSI/ISEA 105, EN 388 (4X32CX)	XS, S, M, L, XL, 2XL	00000000	0000

Static-Dissipative Heat-Protection Gloves

Nitrile-Rubber-Coated Nylon

Also known as wave solder gloves, wear these to avoid damaging static-sensitive electronic parts. They have a nitrile coating that protects hands while soldering.

Available Sizes
Size	Glove Size
S	7
M	8
L	9
XL	10

Nylon Fabric
Lg.	Texture	Coating Coverage	Cuff Style	Color	Surface Resistance	Max. Temp., °F	For Heat Exposure Type	Choose a Size		Pair
9"	Textured	Palm	Knit	Black/Gray	10⁶ ohms	200°	Direct	S, M, L, XL	0000000	00000

Static-Dissipative Inspection Gloves

Handle your most sensitive electronics without causing damage. These gloves not only dissipate static charges but also reduce the transfer of contaminants from your hands that could disrupt components. They’re also low-linting, so they won’t shed fibers on parts. These gloves are often worn during electronic manufacturing and in labs.

Gloves with coating improve your grip but won’t leave marks on parts. Gloves with coating on the fingertips are more breathable than gloves with coating on the palm.

Available Sizes
Size	Glove Size
XS	6
S	7
M	8
L	9
XL	10
2XL	11

	Coating										Pair
Texture	Material	Coverage	Knitting Gauge	Lg.	Cuff Style	Touchscreen Compatible	Color	Surface Resistance	Choose a Size		1-11	12-Up
Nylon/Carbon Fiber Fabric Blend
Smooth	__	__	13	8 1/2"	Knit	Yes	Gray/Green	10⁶-10⁸ ohms	XS, S, M, L, XL, 2XL	00000000	00000	00000
Smooth	Polyurethane Rubber	Fingertips	13	8 1/2"	Knit	Yes	Gray/Green	10⁶-10⁸ ohms	XS, S, M, L, XL, 2XL	00000000	0000	0000
Smooth	Polyurethane Rubber	Palm	13	8 1/2"	Knit	Yes	Gray/Green	10⁶-10⁸ ohms	XS, S, M, L, XL, 2XL	00000000	0000	0000

Extreme-Temperature Static-Dissipative Gloves

Go from furnace to freezer without switching gloves—these gloves can handle everything from red-hot ceramics to ice-cold liquid nitrogen containers. They’re made from PBI fabric, so they safely drain static electricity to prevent damage to sensitive electronic parts. Ideal for controlled environments, these gloves are low-linting. Plus, they’re ambidextrous, so you can wear them on either hand to extend their life. All have an ANSI heat resistance rating of 5, the highest possible rating.

Available Sizes
Size	Glove Size
M	8
L	9
XL	10

PBI Fabric
Lg.	Lining Material	Cuff Style	Color	Hand	Temperature Range, °F	For Heat Exposure Type	Surface Resistance	ANSI Conductive Heat Resistance Rating	Specifications Met	Choose a Size		Pair
14"	Nylon/Wool Fabric Blend	Open	Brown	Ambidextrous	-210° to 1400°	Direct	10⁹ ohms	5	ANSI/ISEA 105	M, L, XL	00000000	0000000
18"	Nylon/Wool Fabric Blend	Open	Brown	Ambidextrous	-210° to 1400°	Direct	10⁹ ohms	5	ANSI/ISEA 105	L	00000000	000000