The mounting holes on these hinges form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use these hinges on doors without a door closer. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick.

Chrome-, brass-, and bronze-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.

304 stainless steel hinges are more corrosion resistant than chrome-, brass-, and bronze-plated low-carbon steel. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use these hinges on doors with or without a door closer. All have concealed bearings to open and close doors smoothly. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick.

Chrome-, brass-, and bronze-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.

304 stainless steel hinges are more corrosion resistant than chrome-, brass-, and bronze-plated low-carbon steel. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use this hinge on doors with or without a door closer. It has concealed bearings to open and close doors smoothly. Also known as a hospital-tip hinge, the top and bottom of the hinge pin are cut on an angle. The pin is nonremovable to provide additional tamper resistance. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick.

For technical drawings and 3-D models, click on a part number.

Turn a set screw to adjust the door 1/8" up or down after it's hung. Thick leaves and a large diameter pin make these hinges good for use with heavy doors. Bearings allow them to open and close doors smoothly. All of these hinges are load rated; capacity is based on two hinges per door. They have a nonremovable pin to deter tampering. To choose a door mounting location, stand on the push side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.

For technical drawings and 3-D models, click on a part number.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors. The hinges are load rated; capacity is based on two hinges per door. All of these hinges have a nonremovable pin to deter tampering. Hinges with bearings open and close doors smoothly.

304 stainless steel hinges resist corrosion better than primed carbon steel. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors. Bearings allow these hinges to open and close heavy doors smoothly. The hinges are load rated; capacity is based on two hinges per door. All have a nonremovable pin to deter tampering.

304 stainless steel hinges are more corrosion resistant than primed carbon steel. They also have good chemical resistance.

Half-surface mount hinges attach with one cutout (mortise) on the side of the door.

For technical drawings and 3-D models, click on a part number.