Often used on cabinet doors and file drawers, these cam locks fit into a ¾” dia. hole, the most common through-hole size, and have an arm that swings to lock.

Ideal for high-vibration environments, these locks create a tighter hold than standard cam locks.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Offering more security than standard keyed alike cam locks, they have circular keys that are difficult to duplicate.

These locks open with their own unique key as well as a master key.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.

Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for washdowns. All open with a slotted screwdriver, so they’re good for areas where you don’t want a complicated keying system.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. Also known as compression cam locks, these create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

The face of these locks has a red indicator that is visible when unlocked and hidden when locked. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments. These locks open with a slotted screwdriver, so they’re great for a facility where you don’t want a complicated keying system.

These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery.

A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures

Mount these two-piece locks on sealed pressurized enclosures to gradually release pressure and prevent your door from bursting open.

Secure enclosures that have smaller-than-standard-diameter through holes. These locks open with a square key, so they’re more protected than locks that open with a hex or slotted driver.

Open these locks with a triangle key—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

Designed for smaller-than-standard-diameter through holes, these locks are often installed in cabinet doors. They open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver.

The spring-loaded cover pops up when these locks are open, so you’re able to see from a distance when they're unlocked. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments. They open with a triangle key, so they match a keying system that's common for industrial enclosures and other machinery but are more secure than locks that open with a hex or slotted driver.

Mount these two-piece locks on sealed pressurized enclosures to gradually release pressure and prevent your door from bursting open.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

A gasket stops water from getting past these locks during high-pressure, high-temperature washdowns common in food processing plants. They lock with a hex key, so they’re great if you don’t want to keep a complicated keying system.

Install these locks in smaller-than-standard diameter through holes to secure enclosure doors and file drawers. They open with a hex key, so they’re great for a facility where you don’t need a complicated keying system.

Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a female hex key (sold separately), so they match a keying system that’s common for industrial enclosures and other machinery but are more secure than locks that open with a male hex key or screwdriver.

Open these locks with a two-way key. Also known as a double-bit key, it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

An O-ring keeps water from entering through the lock during high-pressure, high-temperature washdowns. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

Quickly spot when your door is unlocked—the spring-loaded cover pops up when these locks are open. Also known as compression cam locks, they create a tighter hold than standard cam locks, so they’re often used in high-vibration areas.

Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a two-way key. Also known as a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver.

In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Choose these locks if you need each one to open with a different key.

Secure enclosure doors with these L-handle locks. Choose them if you need several locks that open with the same key.

For a simplified keying system, these cam locks open and close with a slotted screwdriver. Also called quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.

A master key opens all of these locks, which also have their own unique keys.

Fold the ring handle into the recess to stay out of the way when not in use.

With a molded inset grip, the handle remains recessed to stay out of the way.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Choose these locks if you need several locks that open with the same key.

A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks.

To help maintain a sealed enclosure's IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need locks that each open with a different key.

Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.

Install these latches on cabinet doors and file drawers with smaller-than-standard diameter through holes. The wing handle makes it harder for clothing and straps to snag on them than cam latches with a T- or L-handle.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. All have a wing handle that makes it harder to snag straps and other items on them than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.

With a finger-grip knob, these latches fit where latches with handles won't.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

The T-handle lays flush in the recess, so you won’t bump into or catch your clothes on these latches. Also called quarter-turn latches, they have a cam that rotates 90° to secure enclosures.

Fold the handle into the recess to stay out of the way when not in use. Also known as compression cam latches, they create a tighter hold than traditional cam latches, making them useful for doors that have a seal.

Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.

Prevent water, dust, and dirt from getting into a sealed enclosure through the latch. Press the button and the handle pops out; push the handle shut for a secure hold.

Often installed on sealed server cabinets and electrical panels, these latches have a gasket that prevents water, dust, and dirt from getting through the latch. Lift their handle and it swings smoothly to latch and unlatch the door.

Latch and lock doors and cabinets with these swing-handle cam locks, and unlock them with a four-number combination code.

Similar to locks on a hotel safe, each user sets a new combination.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

Keep the contents of your sealed enclosure safe from water damage with these locks that help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. All can be locked with a key as well as a padlock for added security.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

A hex key opens these locks, making them great for a facility where you don’t want a complicated keying system. Add a padlock for extra security.

For a simple yet secure keying system, these locks open with a two-way key (sold separately), also called a double-bit key. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

Secure these latches with a padlock.

Great for a facility where you don’t want a complicated keying system, these locks open with a slotted screwdriver. They’re also padlockable for extra security.

To ensure the correct fit on your drawer, these locks include two latch bolts.

With thicker bodies and longer bolts, these locks resist prying to provide more security than other keyed alike deadbolt cabinet door locks.

Open each of these drawer locks with a different key.

These drawer locks open with their own keys and with a master key.

To ensure the correct fit on your drawer, these locks include two latch bolts.

Open multiple cabinet locks with the same key.

Each of these cabinet locks opens with its own key.

To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.

Choose these locks if you need several locks that open with the same key.

Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.

To keep someone from getting locked inside an enclosure, these locks have an interior release knob that glows green in the dark. Quickly push the locks closed to secure doors.

Choose these locks if you need several that open with the same key.