Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

Specially formulated for plastics, these threadlockers secure nylon, PTFE, and other plastic threaded fasteners.

These low-friction threadlockers harden slowly, allowing ample time to smoothly adjust multiple large bolts for even clamping.

These threadlockers meet NSF/ANSI 61 for drinking water.

This thick paste withstands temperatures up to 650 °F.

Apply these threadlockers on fasteners that are already installed—their thin consistency allows them to flow into small gaps.

Use these threadlockers for threaded fasteners that require occasional fine-tuning, such as set screws.

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.

In especially damp or humid environments, these adhesives keep their hold.

Form bonds in 5 seconds or less.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.

Form bonds without the strong odor of other instant-bond adhesives.

For flexible bonds that resist cracking, these adhesives stay pliable.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

Even on oily surfaces, these retaining compounds keep their hold.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.

Improve instant-bond adhesive performance on hard-to-bond materials.

Activators are required for no-mix acrylic structural adhesives to create adhesion.

Screw the gun onto a bottle of Loctite® threadlocker or retaining compound, then set the dial to control the amount being dispensed.

Apply this thread sealant stick without a mess.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

Wind this multifilament cord into the grooves of tapered pipe threads to quickly create a seal.

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Make tough, flexible, oil-resistant seals.

These gasket makers come in a tube.

Push the plunger to precisely dispense small amounts.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These adhesives come in a can.

Form rigid seals on plumbing connections and duct.

In or out of water, these sealants maintain their strength.

Made with graphite and nickel, these lubricants can be used in environments with extreme heat and harsh chemicals where antiseize lubricants with copper can't. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Corrosion-resistant additives allow these lubricants to prevent parts from locking together in caustic environments, such as steel mills and power plants.

Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Use them to prevent threaded fasteners and close-fitting parts from locking together in connections where you need to conduct electricity.

These lubricants dry to form a thin, solvent-resistant film that won't squeeze out or attract dirt. Use them to prevent threaded fasteners and close-fitting parts from locking together.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.

Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems.

This grease performs well in a wide range of bearing types.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

No mixing required—these potting compounds come ready to apply.

This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

These coatings require an ultraviolet curing lamp to reach full strength.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

This fast-lapping paste abrades quickly to produce a level, scratch-free surface.