For Use On For Use On |
---|
For Joining For Joining |
---|
Manufacturer Model Number Manufacturer Model Number |
---|
Shear Strength Shear Strength |
---|
|
Type Type |
---|
|
Container Size Container Size |
---|
Formulation Formulation |
---|
|
Begins to Harden Begins to Harden |
---|
|
|
|
Clarity Clarity |
---|
|
Consistency Consistency |
---|
|
Viscosity Viscosity |
---|
Connection Type Connection Type |
---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Peel Strength Peel Strength |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
About Structural Adhesives
More
Optically Clear Epoxy Structural Adhesives
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
0151 and E-30CL are suitable for fiber-optic applications.
E-05CL is toughened to form resilient, impact-resistant bonds on dissimilar materials. It's suitable for use on fiber-optic components.
E-05MR has good moisture resistance. It's toughened to form resilient, impact-resistant bonds on dissimilar materials.



Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
0151 | 1.69 | Cartridge | 60 min. | 24 hrs. | 2,675 | Not Rated | 2.7:1 | Thick Liquid (60,000 cP) | -65 to 160° F | Metal, Plastic, Rubber, Glass | 00000000 | 000000 |
0151 | 3.3 | Tube | 60 min. | 24 hrs. | 2,675 | Not Rated | 2.7:1 | Thick Liquid (60,000 cP) | -65 to 160° F | Metal, Plastic, Rubber, Glass | 00000000 | 00000 |
0151 | 41.6 | Can | 60 min. | 24 hrs. | 2,675 | Not Rated | 2.7:1 | Thick Liquid (60,000 cP) | -65 to 160° F | Metal, Plastic, Rubber, Glass | 00000000 | 000000 |
608 | 1.69 | Cartridge | 5 min. | 24 hrs. | 2,980 | Not Rated | 1:1 | Paste (100,000 cP) | -65 to 130° F | Metal, Plastic, Rubber | 0000000 | 00000 |
608 | 2.8 | Tube | 5 min. | 24 hrs. | 2,980 | Not Rated | 1:1 | Paste (100,000 cP) | -65 to 130° F | Metal, Plastic, Rubber | 00000000 | 00000 |
D609 | 1.69 | Cartridge | 5 min. | 24 hrs. | 1,800 | Not Rated | 1:1 | Thick Liquid (15,000 cP) | -65 to 180° F | Metal, Plastic, Rubber | 00000000 | 00000 |
E-05CL | 1.69 | Cartridge | 3 min. | 24 hrs. | 1,430 | Not Rated | 1:1 | Thick Liquid (2,500 cP) | -65 to 180° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
E-05MR | 1.69 | Cartridge | 5 min. | 24 hrs. | 3,380 | Not Rated | 1:1 | Thick Liquid (25,000 cP) | -65 to 250° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
E-30CL | 1.69 | Cartridge | 30 min. | 24 hrs. | 3,100 | Not Rated | 2:1 | Thick Liquid (10,000 cP) | -65 to 250° F | Metal, Plastic, Ceramic, Glass | 0000000 | 00000 |
E-30CL | 6.76 | Cartridge | 30 min. | 24 hrs. | 3,100 | Not Rated | 2:1 | Thick Liquid (10,000 cP) | -65 to 250° F | Metal, Plastic, Ceramic, Glass | 0000000 | 00000 |
M-31CL | 1.69 | Cartridge | 30 min. | 24 hrs. | 3,100 | Not Rated | 2:1 | Thick Liquid (6,000 cP) | -65 to 300° F | Metal, Plastic, Rubber, Glass | 0000000 | 00000 |

Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Pkg. Qty. | Pkg. | |
Loctite® Adhesives | |||||||||||||
608 | 0.14 | One-Time-Use Packet | 5 min. | 24 hrs. | 2,980 | Not Rated | 1:1 | Paste (100,000 cP) | -65° to 130° | Metal, Plastic, Rubber | 10 | 00000000 | 000000 |
Each | ||
Mixer Nozzle for 1.69-oz. Loctite® Cartridges | 00000000 | 00000 |
Mixer Nozzle for 6.76-oz. Loctite® Cartridges | 0000000 | 0000 |
Dispensing Gun for 1.69-oz Loctite® Cartridges | 00000000 | 00000 |
Dispensing Gun for 6.76-oz. Loctite® Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.69-oz. Loctite® Cartridges | 000000000 | 000000 |
Toughened Epoxy Structural Adhesives

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.
E-40FL and E-90FL bond dissimilar materials.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
E-20HP | 1.69 | Cartridge | 20 min. | 24 hrs. | 3,270 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -25° to 250° | Off-White | Metal, Plastic | 0000000 | 000000 |
E-20HP | 6.76 | Cartridge | 20 min. | 24 hrs. | 3,270 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -25° to 250° | Off-White | Metal, Plastic | 0000000 | 00000 |
E-20HP | 13.5 | Cartridge | 20 min. | 24 hrs. | 3,270 | Not Rated | 2:1 | Thick Liquid (37,000 cP) | -25° to 250° | Off-White | Metal, Plastic | 0000000 | 000000 |
E-40FL | 1.69 | Cartridge | 40 min. | 24 hrs. | 640 | Not Rated | 1:1 | Thick Liquid (70,000 cP) | -25° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass | 0000000 | 00000 |
E-40FL | 6.76 | Cartridge | 40 min. | 24 hrs. | 640 | Not Rated | 1:1 | Thick Liquid (70,000 cP) | -25° to 250° | Off-White | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass | 0000000 | 00000 |
E-40FL | 13.5 | Cartridge | 40 min. | 24 hrs. | 640 | Not Rated | 1:1 | Thick Liquid (70,000 cP) | -25° to 250° | Off-White | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass | 0000000 | 000000 |
E-40HT | 1.69 | Cartridge | 40 min. | 24 hrs. | 4,030 | Not Rated | 2:1 | Paste (430,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber | 0000000 | 00000 |
E-60HP | 1.69 | Cartridge | 60 min. | 24 hrs. | 4,320 | Not Rated | 2:1 | Thick Liquid (45,000 cP) | -25° to 250° | Off-White | Metal, Plastic, Rubber | 0000000 | 00000 |
E-60HP | 13.5 | Cartridge | 60 min. | 24 hrs. | 4,320 | Not Rated | 2:1 | Thick Liquid (45,000 cP) | -25° to 250° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |
E-90FL | 1.69 | Cartridge | 90 min. | 24 hrs. | 810 | Not Rated | 1:1 | Thick Liquid (40,000 cP) | -25° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass | 0000000 | 00000 |
E-90FL | 13.5 | Cartridge | 90 min. | 24 hrs. | 810 | Not Rated | 1:1 | Thick Liquid (40,000 cP) | -25° to 250° | Off-White | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass | 0000000 | 00000 |
9462 | 1.69 | Cartridge | 55 min. | 72 hrs. | 4,180 | 22 | 1:1 | Thick Liquid (70,000 cP) | -65° to 250° | Beige | Metal, Plastic, Rubber | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.69-oz. Cartridges | 00000000 | 00000 |
Mixer Nozzle for 6.76-oz. E-20HP Loctite® Cartridges | 0000000 | 0000 |
Air-Powered Dispensing Gun for 1.69-oz. Loctite® Cartridges | 000000000 | 000000 |
Dispensing Gun for 1.69-oz. Cartridges | 00000000 | 00000 |
Dispensing Gun for 6.76-oz. E-20HP Loctite® Cartridges | 0000000 | 000000 |
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
9460 and E-20NS are nonsagging, so they won't drip from vertical or overhead surfaces. 9460 bonds dissimilar materials.



Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
11C | 4 oz. | Tube | 20 min. | 72 hrs. | 2,270 | Not Rated | 2.5:1 | Paste (367,850 cP) | -65° to 300° | Black | Metal, Plastic, Rubber | 00000000 | 000000 |
1C | 4 oz. | Tube | 20 min. | 72 hrs. | 1,500 | Not Rated | 2.5:1 | Paste (350,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
1C-LV | 1.69 oz. | Cartridge | 20 min. | 72 hrs. | 2,100 | Not Rated | 2:1 | Thick Liquid (66,750 cP) | -65° to 250° | Beige | Metal, Plastic, Rubber | 0000000 | 00000 |
615 | 3.2 oz. | Tube | 10 min. | 24 hrs. | 3,825 | Not Rated | 1:1 | Paste (200,000 cP) | -65° to 180° | Light Blue | Metal, Plastic, Rubber | 00000000 | 00000 |
9460 | 1.69 oz. | Cartridge | 50 min. | 72 hrs. | 3,500 | 30 | 1:1 | Paste (200,000 cP) | -65° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 00000 |
9460 | 2.5 gal. | Can | 50 min. | 72 hrs. | 3,500 | 30 | 1:1 | Paste (200,000 cP) | -65° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 000000 |
9460 | 6.76 oz. | Cartridge | 50 min. | 72 hrs. | 3,500 | 30 | 1:1 | Paste (200,000 cP) | -65° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 00000 |
E-20NS | 1.69 oz. | Cartridge | 20 min. | 24 hrs. | 2,790 | Not Rated | 2:1 | Thick Liquid (60,000 cP) | -65° to 250° | Beige | Metal, Plastic, Rubber | 0000000 | 00000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
HY4090 is a blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.

Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Gray | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 000000 |
HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 00000 |
HY4090 | 13.5 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 0000000 | 000000 |
Epoxy Structural Adhesives for Harsh Environments
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
E-120HP resists acetone, fuel, and oil. It bonds dissimilar materials and withstands rapid changes in temperature.
9430 bonds dissimilar materials and resists fuel and hydraulic fluid.


Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Loctite® Adhesives | ||||||||||||||
E-120HP | 1.69 oz. | Cartridge | 2 hrs. | 24 hrs. | 4,300 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -65° to 250° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic | 0000000 | 000000 |
E-120HP | 6.76 oz. | Cartridge | 2 hrs. | 24 hrs. | 4,300 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -65° to 250° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic | 0000000 | 00000 |
E-120HP | 13.5 oz. | Cartridge | 2 hrs. | 24 hrs. | 4,300 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -65° to 250° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic | 0000000 | 000000 |
9430 | 32 oz. | Can | 50 min. | 5 days | 4,230 | 60 | 3.78:1 | Thick Liquid (12,000 cP) | -65° to 180° | Off-White | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 000000 |
9430 | 1.25 gal. | Can | 50 min. | 5 days | 4,230 | 60 | 3.78:1 | Thick Liquid (12,000 cP) | -65° to 180° | Off-White | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 000000 |
Each | ||
Mixer Nozzle for 1.69-oz. Cartridges | 00000000 | 00000 |
Mixer Nozzle for 6.76-oz. and 13.5-oz. Cartridges | 0000000 | 0000 |
Replacement Plunger for 13.5-oz. Cartridges (2:1 Mix Ratio) | 00000000 | 0000 |
Air-Powered Dispensing Gun for 1.69-oz. Loctite® Cartridges | 000000000 | 000000 |
Dispensing Gun for 1.69-oz. Cartridges | 00000000 | 00000 |
Dispensing Gun for 6.76-oz. Cartridges | 0000000 | 000000 |
Dispensing Gun for 13.5-oz. Cartridges | 0000000 | 000000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
M-121HP bonds dissimilar materials and withstands rapid changes in temperature.


Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Specifications Met | For Joining | Each | |
9340 | 2.7 | Tube | 90 min. | 24 hrs. | 2,300 | Not Rated | 1:1 | Paste (Not Rated) | -65° to 180° | __ | Metal, Plastic, Rubber | 00000000 | 000000 |
M-121HP | 1.69 | Cartridge | 2 hrs. | 24 hrs. | 4,800 | Not Rated | 2:1 | Thick Liquid (11,000 cP) | -65° to 300° | ISO 10993 | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Ceramic, Glass | 0000000 | 00000 |
Low-Odor Epoxy Structural Adhesives

Bond most materials without the strong odor of other epoxy adhesives. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
E-00NS is nonsagging, so it won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||||
E-00NS | 1.69 | Cartridge | 3 min. | 24 hrs. | 1,600 | Not Rated | 1:1 | Paste (100,000 cP) | -65° to 180° | White | Metal, Plastic, Rubber | 0000000 | 000000 |
Surface Fillers


These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Loctite® Fixmaster Epoxy | ||||||||||||||
EA 445 | 0.1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
EA 445 | 1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
EA 9131 | 0.1 oz. | Mixer Cup | 90 | 24 hrs. | Thick Liquid | 1.5:1 | 1 sq. in. @ 1/4" | -65° to 180° | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 00000 |
Each | ||||||||||||||
Loctite® Fixmaster Poxy Pak™ | ||||||||||||||
EA 9017 | 0.8 oz. | Syringe | 5 | 60 min. | Thick Liquid | 1:1 | Not Rated | -65° to 300° | Clear | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Concrete, Glass, Wood | __ | 0000000 | 00000 |
Pourable Surface Fillers

Make castings and fill voids with these two-part pourable epoxies. The size listed is the combined total of the two parts.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Steel Liquid | |||||||||||||||
EA 3472 | 1 | Can | 25 | 24 | Thick Liquid | 4:1 | 50 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Machine, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 000000 |
EA 3472 | 4 | Can | 25 | 24 | Thick Liquid | 4:1 | 200 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Machine, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 000000 |
Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Specifications Met | Each | |
Loctite® Fixmaster Metal Magic Steel | |||||||||||||||
EA 3463 | 4 | Stick | 3 | 24 hrs. | Putty | 10 sq. in. @ 1/4" | 1" | Yes | -20° to 250° | Gray | Sand | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | NSF/ANSI 61 | 0000000 | 000000 |
Loctite® Fixmaster Underwater Repair Epoxy | |||||||||||||||
EA 9490 | 4 | Stick | 15 | 60 min. | Putty | 16 sq. in. @ 1/4" | 1/4" | Yes | Not Rated to 300° | White | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood | __ | 0000000 | 00000 |
Surface Fillers for Metal




Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Loctite® Fixmaster Aluminum Liquid and Loctite® Fixmaster Aluminum Putty form a nonrusting finish.
Loctite EA 3471 and PC2 35642 have stronger adhesion than any other surface fillers we offer.
Use Loctite® Fixmaster Steel Epoxy with a dispensing gun and mixer nozzle to mix as you dispense.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Aluminum Liquid | |||||||||||||
PC 3466 | 1 lbs. | Jar, Can | 20 | 24 | Thick Liquid | 5:1 | 60 sq. in. @ 1/4" | -20° to 200° | Gray | Machine, Drill, Tap | Aluminum | 0000000 | 0000000 |
Loctite® Fixmaster Aluminum Putty | |||||||||||||
PC 7254 | 1 lbs. | Jar | 20 | 24 | Paste | 4:1 | 70 sq. in. @ 1/4" | -20° to 200° | Gray | Machine, Drill, Tap | Aluminum | 0000000 | 00000 |
Loctite® Fixmaster Steel Putty | |||||||||||||
EA 3471 | 1 lbs. | Jar | 30 | 24 | Thick Liquid | 2.5:1 | 40 sq. in. @ 1/4" | -20° to 220° | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 |
EA 3473 | 1 lbs. | Jar | 3 | 24 | Paste | 1:1 | 50 sq. in. @ 1/4" | -20° to 190° | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 |
PC 235642 | 4 lbs. | Can | 30 | 24 | Paste | 2.5:1 | 170 sq. in. @ 1/4" | -20° to 220° | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 |
Loctite® Fixmaster Steel Epoxy | |||||||||||||
PC 3965 | 1.7 oz. | Cartridge | 3 | 7 | Paste | 1:1 | 57 sq. in. @ 1/4" | -20° to 200° | Gray | Machine, Drill, Sand, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 000000 | 00000 |
Loctite® Fixmaster Stainless Steel Putty | |||||||||||||
EA 3476 | 1 lbs. | Jar | 20 | 24 | Paste | 4:1 | 30 sq. in. @ 1/4" | -20° to 220° | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 |
Chemical-Resistant Surface Fillers for Metal

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Superior Metal | |||||||||||||||
EA 3478 | 1 lbs. | Jar | 20 | 24 hrs. | Paste | 4:1 | 30 sq. in. @ 1/4" | 1" | Yes | -20° to 250° | Gray | Machine, Drill | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Fine-Particle Abrasion-Resistant Surface Fillers for Metal

For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Wear Resistant Putty | |||||||||||||||
PC 7222 | 1 | Jar | 30 | 24 | Putty | 2:1 | 50 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Structural Support Epoxies for Heavy Machinery

Fill the void beneath motors, pumps, and other large machinery to create a structural support for your equipment. Also known as chocking epoxies, these epoxies replace traditional metal chocks, which often need to be machined. Mix these two-part epoxies and pour them in between your equipment and your base—they flow into every nook and cranny for a strong, long-lasting bond. As these epoxies cure, they won’t shrink. Designed to withstand demanding environments, these epoxies handle heavy loads, vibration, and chemicals without cracking. Especially good for harsh marine applications, you can use them when installing marine engines and deck-supported equipment, such as hoists and winches.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, lbs. | Type | Consistency | Viscosity, cP | Color | Begins to Harden, min. | Reaches Full Strength, hrs. | Approx. Coverage @ Thick. | Mix Ratio | Temp. Range, °F | Each | |
Loctite® PC 7202 | |||||||||||
7 | Can | Thick Liquid | 15,000 | Orange | 10 | 24 | 123.2 sq. in. @ 1" | 100:11.6 | -20° to 250° | 000000000 | 0000000 |
21 1/2 | Pail | Thick Liquid | 15,000 | Orange | 10 | 24 | 378.4 sq. in. @ 1" | 100:11.6 | -20° to 250° | 000000000 | 000000 |