McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    11 Products

    Solid and Paste Milling, Turning, and Sawing Lubricants

    Image of Product. Front orientation. Machining and Fabricating Lubricants. Solid and Paste Milling, Turning, and Sawing Lubricants, Stick.

    Stick

    Reduce mess and waste with these easy-to-apply, nonstaining lubricants. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. All resist running and dripping. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free.
    Stick—Lubricants in a stick are solid and can be applied to cutting surfaces, such as band saw blades and drills bits.
    Graphite Additive—Lubricants with graphite are for high-heat applications. Apply to hot surfaces (400° to 850° F), and they melt to coat the surface evenly.
    Cannot Be Sold To—Lubricants that cannot be sold to the regions listed are restricted by product labeling requirements.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Lg.
    Dia.
    For Use With
    For Use On
    Cannot Be Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    LPS Tapmatic Edge
    13Stick—9 1/2"2 1/8"Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium—Outside United States000000000000010000000000000000
     
    Other Machining and Fabricating Lubricants
    16Stick—10 3/4"2"Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, TitaniumPolishing Stones, Sharpening Stones—0000000000001200000000000000
    17.6StickGraphite10"2"Aluminum, Brass, Cast Iron, Copper, Glass, Iron, Nickel, Stainless Steel, Steel, Titanium——000000000000————0
     

    Solid Tapping and Threading Lubricants

    Image of Product. Front orientation. Machining and Fabricating Lubricants. Solid Tapping and Threading Lubricants, Stick.

    Stick

    These easy-to-apply stick lubricants won't drip or run for a cleaner workspace. Use them for tapping many types of metal, as well as plastic and rubber. Apply to taps to make cutting faster and easier, improve surface finishes, and extend tool life. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free.
    Container
    Each
    Package
    Size, fl.
    oz.
    Type
    Lg.
    Dia.
    For Use With
    For Use On
    Each
    Pkg.
    Qty.
    Pkg.
    0.4Stick4 1/2"1/2"Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, TitaniumPolishing Stones, Sharpening Stones0000000000002400000000000000
     

    Solid and Paste Milling, Drilling, and Turning Coolants

    Image of Product. Front orientation. Coolants. Solid and Paste Milling, Drilling, and Turning Coolants, Stick.

    Stick

    An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used with shallow drilling, reaming, and tapping, as well as on saw blades. Remove from tools and work surfaces with alcohol, methyl ethyl ketone, or a parts washer. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
    Stick—Coolant in a stick is solid. Touch it to cutting tools or work surfaces.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Lg.
    Dia.
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Synthetic Base Oil
    1.6Stick2 1/8"1 1/2"Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium0000000000050000000000000000
     

    Conductive Antiseize Lubricants

    Image of Product. Front orientation. Antiseize Lubricants. Conductive Antiseize Lubricants, Stick.

    Stick

    Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
    LB 8065 C5-A Copper-Based Anti-Seize—Loctite® C5-A Copper-Based Anti-Seize lubricants can be used with salt water and petroleum-based chemicals. LB 8065 comes as a stick for no-mess application.
    Container
    Temp.
    Net Wt.,
    oz.
    Type
    Additive
    Min.
    Max.,
    ° F
    Color
    For Use With
    Each
    Loctite® LB 8065 C5-A Copper-Based Anti-Seize
    0.71StickCopper, GraphiteNot Rated1,800CopperAluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel0000000000000
     

    Corrosion-Resistant Antiseize Lubricants

    Image of Product. Front orientation. Antiseize Lubricants. Corrosion-Resistant Antiseize Lubricants, Stick.

    Stick

    Corrosion-resistant additives allow these lubricants to withstand caustic environments, such as steel mills and power plants. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
    LB 8060 Silver Grade Anti-Seize—Loctite® Silver Grade Anti-Seize can be used with fine threads.
    Stick—Lubricants in a stick won’t run or drip.
    Aluminum Additive—Lubricants with aluminum have good heat resistance.
    Graphite Additive—Lubricants with graphite have good chemical and corrosion resistance, along with excellent temperature resistance.
    Container
    Temp.
    Net Wt.,
    oz.
    Type
    Additive
    Min.
    Max.,
    ° F
    Color
    For Use With
    Each
    Loctite® LB 8060 Silver Grade Anti-Seize
    0.71StickAluminum, GraphiteNot Rated1,600SilverAluminum, Stainless Steel
    		0000000000000
     
    back to top