Grease Fitting Junction Blocks
Choose these blocks if you need to lubricate multiple points but need to control how each is greased. Unlike grease fitting manifolds, these blocks have multiple fittings, so you control what each point receives and when. Use the compression fittings on the outlets to connect tubing (not included) between the grease fittings and lubrication points.
Magnetic-mount blocks stick to machines and other steel surfaces.
Zinc-plated steel blocks have mild corrosion resistance. 303 stainless steel blocks are more corrosion resistant than zinc-plated steel blocks and have good chemical resistance.
| Number of Inlets | Number of Outlets | For Tube OD | For NLGI Viscosity Grade  | Overall Wd. | Overall Dp. | Overall Ht. | Max. Pressure, psi | Each | |
Zinc-Plated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Junction Blocks | |||||||||
| 3 | 3 | 1/4" | 00, 0, 1, 2 | 2 3/4" | 3/4" | 2 3/4" | 1,800 | 000000 | 000000 |
| 6 | 6 | 1/4" | 00, 0, 1, 2 | 5 3/4" | 3/4" | 2 3/4" | 1,800 | 000000 | 000000 |
| 10 | 10 | 1/4" | 00, 0, 1, 2 | 9 3/4" | 3/4" | 2 1/2" | 5,000 | 000000 | 000000 |
Magnetic-Mount Junction Blocks | |||||||||
| 3 | 3 | 1/4" | 00, 0, 1, 2 | 5 5/8" | 1 11/16" | 2 11/16" | 5,000 | 000000 | 000000 |
| 6 | 6 | 1/4" | 00, 0, 1, 2 | 6 5/8" | 1 11/16" | 2 11/16" | 5,000 | 000000 | 000000 |
| 10 | 10 | 1/4" | 00, 0, 1, 2 | 10 5/8" | 1 11/16" | 2 3/4" | 5,000 | 000000 | 000000 |
303 Stainless Steel | |||||||||
Junction Blocks | |||||||||
| 3 | 3 | 1/4" | 00, 0, 1, 2 | 2 3/4" | 3/4" | 2 1/2" | 5,000 | 000000 | 000000 |
| 6 | 6 | 1/4" | 00, 0, 1, 2 | 5 3/4" | 3/4" | 2 1/2" | 5,000 | 000000 | 000000 |
| 10 | 10 | 1/4" | 00, 0, 1, 2 | 9 3/4" | 3/4" | 2 1/2" | 5,000 | 000000 | 000000 |
Grease Fitting Manifolds
Save time by sending grease from one fitting to multiple points. These manifolds come with everything you need to set up a remote lubrication system. They deliver the same amount of grease to each lubrication point, so you’ll sometimes see them used to grease an entire machine. All lubrication points connected to the manifold must use the same type of grease.
The tubing attaches to the compression fittings on the manifold’s outlets. To connect the other end of the tubing to your lubrication point, use a compression fitting, an adapter, or both. Adapters come in a variety of shapes and sizes to reach tight or hard-to-reach areas.
For technical drawings and 3-D models, click on a part number.
Female Compression Tube Outlet | Female NPT Grease Fitting Inlet | Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Outlets | For Tube OD | Number of Inlets | Shape | Pipe Size | Wd. | Dp. | Ht. | Max. Pressure, psi | Includes | For NLGI Viscosity Grade | Each | |
Aluminum | ||||||||||||
| 4 | 1/4" | 1 | 65° Elbow | 1/4 | 2 7/8" | 2" | 4" | 2,000 | 25 ft. Lg. 1/4" OD Tubing with NLGI 1 Grease 4 Each 1/8 NPT Male × 1/4" Female Straight Compression Tube Fittings 2 Each 1/8 NPT Female × 1/4"-28 UNF Male Straight Adapters 2 Each 1/8 NPT Female × 1/4"-28 SAE-LT Male 90° Elbow Adapters 2 Each 1/8 NPT Female × 1/8 NPT Male 45° Elbow Adapters 2 Each 1/8 NPT Female × 1/8 NPT Male 90° Elbow Adapters 1 Each Plastic Grease Fitting Dust Cap 8 Each Tubing Inserts 8 Each Cable Ties | 0, 00, 1, 2 | 0000000 | 0000000 |
| 6 | 1/4" | 1 | 65° Elbow | 1/4 | 2 7/8" | 2" | 4" | 2,000 | 50 ft. Lg. 1/4" OD Tubing with NLGI 1 Grease 6 Each 1/8 NPT Male × 1/4" Female Straight Compression Tube Fittings 2 Each 1/8 NPT Female × 1/4"-28 UNF Male Straight Adapters 3 Each 1/8 NPT Female × 1/4"-28 SAE-LT Male 90° Elbow Adapters 2 Each 1/8 NPT Female × 1/8 NPT Male 45° Elbow Adapters 3 Each 1/8 NPT Female × 1/8 NPT Male 90° Elbow Adapters 1 Each Plastic Grease Fitting Dust Cap 12 Each Tubing Inserts 12 Each Cable Ties | 0, 00, 1, 2 | 0000000 | 000000 |
| 12 | 1/4" | 1 | 65° Elbow | 1/4 | 2 7/8" | 2 5/8" | 4" | 2,000 | 100 ft. Lg. 1/4" OD Tubing with NLGI 1 Grease 12 Each 1/8 NPT Male × 1/4" Female Straight Compression Tube Fittings 4 Each 1/8 NPT Female × 1/4"-28 UNF Male Straight Adapters 6 Each 1/8 NPT Female × 1/4"-28 SAE-LT Male 90° Elbow Adapters 4 Each 1/8 NPT Female × 1/8 NPT Male 45° Elbow Adapters 6 Each 1/8 NPT Female × 1/8 NPT Male 90° Elbow Adapters 1 Each Plastic Grease Fitting Dust Cap 24 Each Tubing Inserts 24 Each Cable Ties | 0, 00, 1, 2 | 0000000 | 000000 |
Precision Air-Powered Grease Dispensers
Powered by your air system, these dispensers release a precise amount of grease in timed intervals, so your machine will never have too much or too little. They’ll dispense the right amount even if changing temperatures affect the grease consistency. Back pressure doesn’t impact these dispensers either. But compared to motor-driven dispensers, they’re more complicated to set up. Besides your air system, you’ll need to attach a three-port solenoid valve and either a timer or programmable logic controller (PLC) to control the valve (all not included). If you use a PLC, they’ll prevent over-lubrication when your machine is down by only greasing when it’s running. This is useful for machines with intermittent downtime. Even without a PLC, you can manually cut off the flow without uninstalling the dispenser.
They’re modular, so install or remove pumps as your lubrication needs change. Each pump has mounting holes drilled through their body. Use a screwdriver to turn each pump’s flow-adjustment screw.
These dispensers don’t come with grease, so use the grease that’s best for your machine.
For technical drawings and 3-D models, click on a part number.
Grease Outlet | Overall | Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Grease Outlets | Cap., fl. oz. | Ounces per Cycle, oz. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Thread Type | Pipe Size | Gender | Ht. | Wd. | Max. Distance from Lubrication Point, ft. | Loading Method | Thread Type | Pipe Size | Gender | Each | |
| 1 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | 8 5/16" | 3 1/4" | 3 | Grease Gun | NPT | 1/8 | Female | 0000000 | 0000000 |
| 2 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | 8 5/16" | 4 1/2" | 3 | Grease Gun | NPT | 1/8 | Female | 0000000 | 000000 |
| 4 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | 8 5/16" | 7" | 3 | Grease Gun | NPT | 1/8 | Female | 0000000 | 000000 |
| 6 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | 8 5/16" | 9 1/2" | 3 | Grease Gun | NPT | 1/8 | Female | 0000000 | 000000 |
| Add-On Dispenser, 1 1/4" Wd. | 0000000 | Each | 0000000 |