Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Control the flow of oil to a single lubrication point.

For use in clean environments, these manifolds have multiple air vents that keep pressure balanced.

Manually adjust the flow of oil to a single lubrication point.

Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush to create a dispenser.

A sealed design prevents contamination in dirty and dusty environments. Install a line between the reservoir's pressure port and the lubricated equipment to balance pressure.

Connect these brushes to oil reservoirs and flow adjustment valves to lubricate chain, gears, and conveyors.

Use this dispenser to brush oil on chain, gears, and conveyors. Often used to replenish lubricant after washdowns.

As chain, gears, and conveyors move, these brushes rotate to apply lubricant.

Connect these modular pumps to a reservoir and a solenoid valve to automate the flow of oil.

Ready to connect to your air system, these complete systems include a timer and a reservoir.

Choose from pumps that dispense with a set interval. Turn the dial to adjust the flow from 0.1 oz. to 0.2 oz. per cycle.

Dispense a fixed amount of oil by pumping the handle.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.

A needle dispensing tip provides fine control for lubricating small parts.

Use suction to remove old lubricant from gear boxes and transmissions.

These dispensers have an opening for filling without removing the nozzle.

These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Mount holders in convenient locations to keep grease guns within reach.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Dispense from grease guns into grease fittings and bare lubrication points.

Sets include dispensing tips for grease fittings and bare lubrication points.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

This gun comes filled with 2 oz. of lithium-thickened grease.

Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Turn a small tube of grease into a dispenser.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Mount these pumps to your grease container to bulk load guns.

Spring pressure ensures a constant flow of grease.

Turn the metering pin to adjust flow rate.

Connect these modular pumps to your air system and add a solenoid valve to automate the flow of grease.

Lubricate single- and double-strand roller chain.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

Dispense grease using compressed air.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

These dispensers have a reservoir and controls for coolant flow.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

These dispensers have a reservoir for recirculating coolant.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Use with Snap-Loc hose to assemble and disassemble components.

This hose is made of steel.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

These nozzles handle coolant pressure up to 150 psi.

Lubricate multiple points from a single location.

Inject lubricant into motors, bearings, engine blocks, and all kinds of machinery.

Assortments contain straight, 45° elbow, and 90° elbow fittings.

Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won't pop off when adding grease.

The pins on these fittings lock with dispensing tips for pin-style fittings to create a tight seal.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. They're also known as hydraulic grease fittings.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. Use these fittings in tight spaces where protruding fittings won't work.

Fill these tools with light oil, then tap with a hammer to open clogged fittings.

Tap these tools once or twice with a hammer to install fittings.

Install these fittings into threaded holes.

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Rotate the handle to dispense a continuous flow of liquid.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

A 316 stainless steel housing makes these pumps resistant to coolants such as ethylene glycol.

Use these pumps to move lubricating oil, such as hydraulic and motor oil.

Remove liquid from hard‐to‐reach areas with a long, flexible intake tube that extends into deep and hard‐to-access tanks.

These pumps have a discharge hose for transfer applications and a vacuum breaker that drains the hose to prevent siphoning. A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

Often used with ammonia, etching and cleaning solutions, and other caustics, these pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

Since these pumps move liquid by pressurizing your drum, they have few moving parts prone to wear and tear.

Use these pumps to move lubricating oil such as hydraulic and motor oil.

Including nozzles and connectors, these pumps come with everything you need to start pumping.

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. Their electric motors are UL listed for use in environments with flammable gases and combustible dust.

Alter the flow rate for versatile dispensing.