Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Serve multiple lubrication points from a single location.

For use in clean environments, these manifolds have multiple air vents that keep pressure balanced.

Manually adjust the flow of oil to a single lubrication point.

Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush to create a dispenser.

For use in clean environments, these oil reservoirs have multiple air vents that keep pressure balanced.

Connect these brushes to oil reservoirs and flow adjustment valves to lubricate chain, gears, and conveyors.

Use this dispenser to brush oil on chain, gears, and conveyors. Often used to replenish lubricant after washdowns.

A solenoid automatically starts and stops flow to dispense lubricant while equipment is running.

Choose from pumps that dispense with a set interval. Turn the dial to adjust the flow from 0.1 oz. to 0.2 oz. per cycle.

With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dial to set the cycle interval.

Ready to connect to your air system, these complete systems include a timer and a reservoir.

Use with manual and electric pumps to dispense different amounts of oil from multiple lubrication points.

These dispensers have an opening for filling without removing the nozzle.

A needle dispensing tip provides fine control for lubricating small parts.

Deliver a mist of oil using shop air.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Use with Snap-Loc hose to assemble and disassemble components.

This hose is made of steel.

These dispensers have a reservoir and controls for coolant flow.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

Draw coolant from your existing tank.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

These nozzles handle coolant pressure up to 150 psi.

Tighten the cover to dispense grease.

Turn the metering pin to adjust flow rate.

Apply lubricant to gear racks with a 14 1/2° pressure angle and a pitch of 16.

Connect these modular pumps to your air system and add a solenoid valve to automate the flow of grease.

Dispense small amounts of grease with one of these compact guns.

This gun comes filled with 2 oz. of lithium-thickened grease.

Deliver small amounts of grease with only a light push against the lubrication point.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Dispense grease with the highest-pressure-rated gun we offer.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.

Dispense small amounts of grease with this compact gun.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Dispense from grease guns into grease fittings and bare lubrication points.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Mount holders in convenient locations to keep grease guns within reach.

Sets include dispensing tips for grease fittings and bare lubrication points.

Replace the dispensing tip on your filler pump.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

A display allows you to monitor how much grease is dispensed.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

Inject lubricant into motors, bearings, engine blocks, and all kinds of machinery.

Assortments contain straight, 45° elbow, and 90° elbow fittings.

Use these fittings in tight spaces where protruding fittings won't work.

Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won't pop off when adding grease.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. They're also known as hydraulic grease fittings.

Drive these fittings into unthreaded holes. They're also known as hydraulic grease fittings.

Remove worn fittings and repair threaded holes.

When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.

Access difficult-to-reach lubrication points from up to 10 ft. away.

Drive these fittings into unthreaded holes.