Rated NEMA 4X, these switches are protected from corrosion and washdowns.

These switches are rated NEMA 3R for protection from falling water and light splashing.

Use these switches with motors that run forward and backward, such as motors for conveyor belts.

Sized to fit in tight spaces, these starters have a shorter height and narrower depth than most other starters.

With a shallower depth than most other starters, these fit in narrow spaces.

Housed in a durable steel enclosure.

Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns.

Operated by hand, these starters are more compact than electrically actuated motor starters; use them when multiple motor circuits are housed in one panel.

Assemble your own motor starter by combining a switch and a thermal overload element.

Mount these monitors to DIN rail.

These switches meet MIL-S-3950.

Prevent accidental actuation—these toggle switches must be pulled up before they can switch a circuit.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Able to withstand high currents, these switches are often used with motors and pumps.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 22 mm dia. cutouts.

These plastic switches are rated NEMA 4X, 13, and IP65 for protection from corrosion, washdowns, and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Rated NEMA 4X and 13, these switches are protected from corrosion, washdowns, and oil/coolant spraying.

These switches are housed in a durable steel enclosure.

Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.

These switches are housed in a durable steel enclosure.

With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.

These aluminum switches are rated NEMA 4, 13, and IP66 for protection from washdowns and oil/coolant spraying.

A red light flashes when the actuator is pushed, making it easy to see from a distance. They're rated IP65 for protection from washdowns.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Install in 14 mm dia. cutouts.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Save space on a panel by using one switch to perform multiple switching functions.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Able to handle tough, repetitive use, these switches are more durable than standard plastic switches.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.

Install in 12 mm dia. cutouts.

Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

Rated IP67, these switches are protected from washdowns.

Operate equipment from up to 330 feet away—these switches include a transmitter and a receiver that connects to equipment.

Use these hand-held switches with mobile machinery.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

Choose an actuator and contact block to make your own 16 mm switch.

Choose an actuator and contact block to make your own 30 mm switch.

Rated NEMA 6P and IP68, these switches are protected against washdowns, corrosion, and temporary submersion.

Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.

Press these switches with your foot for convenient, hands-free operation.

When the pedal is pressed, the built-in potentiometer adjusts the resistance to vary the speed for motor drives.

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems. Equipment will not start up again until switch is manually reset.

The light touch of a finger turns circuits on and off without pressing down a contact.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

With a round key that is difficult to duplicate, these switches provide a higher degree of security than standard key switches.

Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Customize the length of these switches by cutting them from a 25-foot roll.

At only 3/32" thick, these mats fit under carpeting or anywhere else you want to hide them.

These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.

Thicker than standard safety switch mats, these withstand repeated impact from heavy and sharp objects.