Choose a Category
Material Material |
|---|
|
Shape Shape |
|---|
 |  |
| Round | Made to Order |
Thickness Thickness |
|---|
|
|
|
Hardness Hardness |
|---|
|
|
Temper Rating Temper Rating |
|---|
|
Specifications Met Specifications Met |
|---|
|
Magnetic Properties Magnetic Properties |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Made-to-Order Unthreaded Spacers
Reference Table 1: Maximum Lengths by ID
Reference Table 2: IDs for Common Screw Sizes
How to Order:
1. Choose material.
2. Find the needed OD and length combination.
3. Specify OD, length, and ID in .001” increments. Long lengths may not be possible at small IDs. See Reference Table 1: Maximum Lengths by ID.
Choose an ID | Each | ||||||
|---|---|---|---|---|---|---|---|
| Choose an OD | Choose a Lg. | Min. | Max. | 1-4 | 5-9 | 10-Up | |
18-8 Stainless Steel | |||||||
| 0.125" to 0.250" | 0.125" to 2.000" | 0.063" | ID must be at least 0.050" less than OD | 000000000 | 000000 | 000000 | 000000 |
| 0.251" to 0.500" | 0.125" to 4.000" | 0.125" | ID must be at least 0.060" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 0.501" to 1.000" | 0.125" to 5.000" | 0.188" | ID must be at least 0.120" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.001" to 1.500" | 0.125" to 3.000" | 0.250" | ID must be at least 0.160" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.001" to 1.500" | 3.001" to 6.000" | 0.250" | ID must be at least 0.160" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.501" to 2.000" | 0.125" to 3.000" | 0.375" | ID must be at least 0.250" less than OD | 000000000 | 000000 | 00000 | 00000 |
| 1.501" to 2.000" | 3.001" to 6.000" | 0.375" | ID must be at least 0.250" less than OD | 000000000 | 000000 | 00000 | 00000 |
| 2.001" to 3.000" | 0.125" to 3.000" | 0.625" | ID must be at least 0.375" less than OD | 000000000 | 000000 | 000000 | 000000 |
| 2.001" to 3.000" | 3.001" to 6.000" | 0.625" | ID must be at least 0.375" less than OD | 000000000 | 000000 | 000000 | 000000 |
12L14 Steel | |||||||
| 0.125" to 0.250" | 0.125" to 2.000" | 0.063" | ID must be at least 0.050" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 0.251" to 0.500" | 0.125" to 4.000" | 0.125" | ID must be at least 0.060" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 0.501" to 1.000" | 0.125" to 5.000" | 0.188" | ID must be at least 0.120" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.001" to 1.500" | 0.125" to 3.000" | 0.250" | ID must be at least 0.160" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.001" to 1.500" | 3.001" to 6.000" | 0.250" | ID must be at least 0.160" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.501" to 2.000" | 0.125" to 3.000" | 0.375" | ID must be at least 0.250" less than OD | 000000000 | 000000 | 00000 | 00000 |
| 1.501" to 2.000" | 3.001" to 6.000" | 0.375" | ID must be at least 0.250" less than OD | 000000000 | 000000 | 00000 | 00000 |
| 2.001" to 3.000" | 0.125" to 3.000" | 0.625" | ID must be at least 0.375" less than OD | 000000000 | 000000 | 000000 | 000000 |
| 2.001" to 3.000" | 3.001" to 6.000" | 0.625" | ID must be at least 0.375" less than OD | 000000000 | 000000 | 000000 | 000000 |
6061 Aluminum | |||||||
| 0.125" to 0.250" | 0.125" to 2.000" | 0.063" | ID must be at least 0.050" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 0.251" to 0.500" | 0.125" to 4.000" | 0.125" | ID must be at least 0.060" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 0.501" to 1.000" | 0.125" to 5.000" | 0.188" | ID must be at least 0.120" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.001" to 1.500" | 0.125" to 3.000" | 0.250" | ID must be at least 0.160" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.001" to 1.500" | 3.001" to 6.000" | 0.250" | ID must be at least 0.160" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.501" to 2.000" | 0.125" to 3.000" | 0.375" | ID must be at least 0.250" less than OD | 000000000 | 000000 | 00000 | 00000 |
| 1.501" to 2.000" | 3.001" to 6.000" | 0.375" | ID must be at least 0.250" less than OD | 000000000 | 000000 | 00000 | 00000 |
| 2.001" to 3.000" | 0.125" to 3.000" | 0.625" | ID must be at least 0.375" less than OD | 000000000 | 000000 | 000000 | 000000 |
| 2.001" to 3.000" | 3.001" to 6.000" | 0.625" | ID must be at least 0.375" less than OD | 000000000 | 000000 | 000000 | 000000 |
Brass | |||||||
| 0.125" to 0.250" | 0.125" to 2.000" | 0.063" | ID must be at least 0.050" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 0.251" to 0.500" | 0.125" to 4.000" | 0.125" | ID must be at least 0.060" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 0.501" to 1.000" | 0.125" to 5.000" | 0.188" | ID must be at least 0.120" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.001" to 1.500" | 0.125" to 3.000" | 0.250" | ID must be at least 0.160" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.001" to 1.500" | 3.001" to 6.000" | 0.250" | ID must be at least 0.160" less than OD | 000000000 | 00000 | 00000 | 00000 |
| 1.501" to 2.000" | 0.125" to 3.000" | 0.375" | ID must be at least 0.250" less than OD | 000000000 | 000000 | 00000 | 00000 |
| 1.501" to 2.000" | 3.001" to 6.000" | 0.375" | ID must be at least 0.250" less than OD | 000000000 | 000000 | 00000 | 00000 |
| 2.001" to 3.000" | 0.125" to 3.000" | 0.625" | ID must be at least 0.375" less than OD | 000000000 | 000000 | 000000 | 000000 |
| 2.001" to 3.000" | 3.001" to 6.000" | 0.625" | ID must be at least 0.375" less than OD | 000000000 | 000000 | 000000 | 000000 |
Made-to-Order Shims
For unique shim shapes or sizes, send a dimensioned STEP or DXF file to chi.sales@mcmaster.com and we’ll precision cut your shim. Shims include a material certificate with traceable lot number and test report.
Please leave at least 1/8" wall between shim edge and holes. Minimum hole size is 1/8". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like brass, can be used as wear plates between components that rub together, preventing damage to equipment.
Stainless steel shims are more corrosion resistant than carbon steel shims. 316 stainless steel shims have the best corrosion resistance of our stainless steel shims.
Carbon steel shims have excellent strength and can be welded, but they aren't as corrosion resistant as other shims.
Brass shims are corrosion resistant and nonmagnetic.
| Thick. | Thick. Tolerance | Min. Hole Size | Min. Wall Thick. | Cutout Tolerance | Min. Hardness | Max. Hardness | Pkg. of 16 | |
2" × 2" Max. Shim Size | ||||||||
|---|---|---|---|---|---|---|---|---|
18-8 Stainless Steel—ASTM A240 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
1008-1010 Carbon Steel—ASTM A109, Fed. Spec. QQ-S-698 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
260 Brass—ASTM B36, Fed. Spec. QQ-B-613 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
316 Stainless Steel—ASTM A240, Fed. Spec. QQ-S-766 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| Pkg. of 4 | ||||||||
5" × 5" Max. Shim Size | ||||||||
18-8 Stainless Steel—ASTM A240 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
1008-1010 Carbon Steel—ASTM A109, Fed. Spec. QQ-S-698 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
260 Brass—ASTM B36, Fed. Spec. QQ-B-613 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
316 Stainless Steel—ASTM A240, Fed. Spec. QQ-S-766 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 00000 |
| Pkg. of 9 | ||||||||
7" × 7" Max. Shim Size | ||||||||
18-8 Stainless Steel—ASTM A240 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
1008-1010 Carbon Steel—ASTM A109, Fed. Spec. QQ-S-698 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 000000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
260 Brass—ASTM B36, Fed. Spec. QQ-B-613 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.005" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
316 Stainless Steel—ASTM A240, Fed. Spec. QQ-S-766 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| Pkg. of 4 | ||||||||
11" x 11" Max. Shim Size | ||||||||
18-8 Stainless Steel—ASTM A240 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.009" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
1008-1010 Carbon Steel—ASTM A109, Fed. Spec. QQ-S-698 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 000000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
260 Brass—ASTM B36, Fed. Spec. QQ-B-613 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
316 Stainless Steel—ASTM A240, Fed. Spec. QQ-S-766 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| Pkg. of 1 | ||||||||
23" x 23" Max. Shim Size | ||||||||
18-8 Stainless Steel—ASTM A240 | ||||||||
| 0.001" | -0.00005" to 0.00005" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell C42 | __ | 000000000 | 000000 |
1008-1010 Carbon Steel—ASTM A109, Fed. Spec. QQ-S-698 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 000000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.009" | -0.00045" to 0.00045" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B90 | __ | 000000000 | 00000 |
260 Brass—ASTM B36, Fed. Spec. QQ-B-613 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 00000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | Rockwell B60 | __ | 000000000 | 000000 |
316 Stainless Steel—ASTM A240, Fed. Spec. QQ-S-766 | ||||||||
| 0.002" | -0.0001" to 0.0001" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.003" | -0.00015" to 0.00015" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.004" | -0.0002" to 0.0002" | 1/8" | 1/8" | -0.01" to 0.01" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.005" | -0.00025" to 0.00025" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.006" | -0.0003" to 0.0003" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.007" | -0.00035" to 0.00035" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.01" | -0.0005" to 0.0005" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.015" | -0.00075" to 0.00075" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.02" | -0.001" to 0.001" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.025" | -0.00125" to 0.00125" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
| 0.031" | -0.00155" to 0.00155" | 1/8" | 1/8" | -0.005" to 0.005" | __ | Rockwell B95 | 000000000 | 000000 |
Made-to-Order Peel-Away Layered Shims
For unique shim shapes or sizes, send a dimensioned STEP or DXF file to chi.sales@mcmaster.com and we’ll precision cut your shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need. To make the layers easier to pull apart, gently heat the shim to soften the adhesive. Shims include a material certificate with traceable lot number and test report.
Please leave at least 1/8" wall between shim edge and holes. Minimum hole size is 1/8". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like brass or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
18-8 stainless steel shims are more corrosion resistant than carbon steel shims.
Carbon steel shims have excellent strength and can be welded, but aren't as corrosion resistant as other shims.
Aluminum shims are lightweight and nonmagnetic. They have good corrosion resistance.
Brass shims are corrosion resistant and nonmagnetic.
| Thick. | Thick. Tolerance | Min. Hole Size | Min. Wall Thick. | Cutout Tolerance | No. of Layers | Layer Thick. | Min. Hardness | Max. Hardness | Pkg. of 16 | |
2" × 2" Max. Shim Size | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
18-8 Stainless Steel—ASTM A240 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 00000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 00000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
1100 Aluminum—AMS-QQ-A-250/1, ASTM B209 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
260 Brass—ASTM B36 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
| Pkg. of 4 | ||||||||||
5" × 5" Max. Shim Size | ||||||||||
18-8 Stainless Steel—ASTM A240 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 00000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 00000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 00000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
1100 Aluminum—AMS-QQ-A-250/1, ASTM B209 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
260 Brass—ASTM B36 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 00000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
| Pkg. of 9 | ||||||||||
7" × 7" Max. Shim Size | ||||||||||
18-8 Stainless Steel—ASTM A240 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
1100 Aluminum—AMS-QQ-A-250/1, ASTM B209 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
260 Brass—ASTM B36 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
| Pkg. of 4 | ||||||||||
11" x 11" Max. Shim Size | ||||||||||
18-8 Stainless Steel—ASTM A240 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
1100 Aluminum—AMS-QQ-A-250/1, ASTM B209 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
260 Brass—ASTM B36 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
| Pkg. of 1 | ||||||||||
23" x 23" Max. Shim Size | ||||||||||
18-8 Stainless Steel—ASTM A240 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B80 | Rockwell B92 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Rockwell B54 | Rockwell B65 | 000000000 | 000000 |
1100 Aluminum—AMS-QQ-A-250/1, ASTM B209 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |
260 Brass—ASTM B36 | ||||||||||
| 0.008" | -0.0004" to 0.0004" | 1/8" | 1/8" | -0.005" to 0.005" | 4 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.016" | -0.0008" to 0.0008" | 1/8" | 1/8" | -0.005" to 0.005" | 8 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.032" | -0.0016" to 0.0016" | 1/8" | 1/8" | -0.005" to 0.005" | 16 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.005" to 0.005" | 24 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.062" | -0.0031" to 0.0031" | 1/8" | 1/8" | -0.005" to 0.005" | 32 | 0.002" | Not Rated | __ | 000000000 | 000000 |
| 0.124" | -0.0062" to 0.0062" | 1/8" | 1/8" | -0.005" to 0.005" | 62 | 0.02" | Not Rated | __ | 000000000 | 000000 |