Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups. Holders have fine-adjustment knobs for precise positioning.

Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups. Use the fine adjustment knob on the clamp for precise positioning.

Adjust the flexible arm to nearly any position. These holders have a ball-and-socket segmented arm that locks in place with a lever. The magnetic base has a release switch for easy setups.

Holders with V-grooved base can be mounted on both curved and flat surfaces.

Holders with fine-adjustment base or clamp give you more precise control over positioning.

Use the threaded mounting hole on these bases to hold upright posts and fixtures. Bases have a magnetic-release switch for easy setups.

V-grooved bases can be mounted on both curved and flat metal surfaces.

This magnetic base has a threaded mounting hole to hold upright posts and fixtures. It has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups.

The threaded mounting holes on this base hold upright posts and fixtures. It has a flat bottom for mounting on flat metal surfaces and a V-step at the top of the base for mounting on round surfaces. The magnetic-release switch allows for easy setups.

Use a swivel clamp (not included) to attach an indicator to the positioning arm. These holders are often used in areas with limited space. They have a magnetic base with a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups.

Style A has a fine-adjustment knob on the arm for precise positioning.

Style B has a pivoting arm attached to an adjustable sliding block. Use the fine-adjustment knob on the sliding block for precise positioning. The arm can be removed to hold a 1/4” lug back.

A flexible ball-and-socket segmented arm adjusts to nearly any position and locks in place with a lever. The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces. It has a magnetic-release switch for easy setups.

The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces. Use the fine-adjustment knob to precisely position the arm.

The magnetic base has a V-grooved bottom to provide a solid mount on flat and curved metal surfaces. It also has a magnetic release switch for easy setups.

Indicator has a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles.

Place the magnetic base on metal surfaces for a solid mount. The base has a V-grooved bottom for mounting on flat and curved surfaces and magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the holder’s arm.

Indicator has a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles.

For a solid mount on metal surfaces, this indicator comes with a magnetic base. It has a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects.

A magnetic base provides a solid mount on metal surfaces. It has a V-grooved bottom for mounting on flat and curved surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the holder’s arm.

The indicator has a spring-loaded plunger that retracts and extends to measure objects. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point, and a go/no-go operation indicates when measurements fall outside your set tolerance.

Place the magnetic base on metal surfaces for a solid mount. It has a V-grooved bottom for mounting on flat and curved surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the holder’s arm.

Also known as a test indicator, the indicator has a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. It has jeweled bearings for high sensitivity, wear resistance, and a long service life. Rotate the dial face for viewing at multiple angles.

Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on flat and curved metal surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob on the holder’s clamp for precise positioning of the indicator.

Also known as a test indicator, the indicator has a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. It has jeweled bearings for high sensitivity, wear resistance, and a long service life. Rotate the dial face for viewing at multiple angles.

An on/off magnet control makes it easy to move and attach these brackets to metal surfaces. Secure items to the bracket plate. Magnets are made of neodymium (neodymium-iron-boron), a rare earth material. They have a case that concentrates and focuses the magnetic field. It also protects the magnetic material.

Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.

For technical drawings and 3-D models, click on a part number.

Build a custom system to deliver coolant, cutting oil, water, or air in any direction. Once in position, hose stays put—there's no spring back or movement caused by vibration or heavy flow.

Assemble and disassemble by snapping components together or pulling them apart. Assembly pliers (sold separately) are recommended. To ensure compatibility, select the color and trade size that match your current system. These components fit Loc-Line hose with a 1/4” ID.

Manifolds can be joined with connectors.

For technical drawings and 3-D models, click on a part number.