Magnetic-Base Drill Presses

	Voltage Voltage

120V AC

240V AC

	Manufacturer Manufacturer

Milwaukee

Hougen

Jancy

	Manufacturer Model Number Manufacturer Model Number

	Spindle Shank Type Spindle Shank Type

Chuck

Morse

	System of Measurement System of Measurement

Inch

Metric

	For Maximum Drill Bit Size For Maximum Drill Bit Size

1/2"

3/4"

1 1/4"

	Spindle Travel Spindle Travel

2 9/16"

5 11/16"

11"

	Number of Speeds Number of Speeds

Variable

	For Surface Material For Surface Material

Iron

Steel

Stainless Steel

	For Bit Shank Type For Bit Shank Type


Hex	Round

Threaded

	For Maximum Bit Shank Size For Maximum Bit Shank Size

	Weight Weight

	Overall Length Overall Length

	Base Type Base Type

Adjustable

Fixed

	Plug Type Plug Type

Two Prong

Three Prong

	Column Feed Handle Mounting Location Column Feed Handle Mounting Location

Left Side

Right Side

	Cord Length Cord Length

	For Minimum Surface Thickness For Minimum Surface Thickness

1/5"

3/8"

1/2"

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	For Manufacturer Model Number For Manufacturer Model Number

	Maximum No-Load Speed Maximum No-Load Speed

	Holding Force Holding Force

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

Forward

How can we improve?

41 Products

Adjustable-Position Milwaukee Magnetic-Base Drill Presses

Chuck Spindle Shank

Morse Spindle Shank

Lock the magnet to secure the base and then move the motor to center the cutter for pinpoint accuracy. You can move the motor 3/4" forward and backward and tilt it 20° left and right. Switch these drills from forward to reverse without stopping—ideal for both drilling and tapping applications (not recommended for use with pipe taps). In addition, a dial lets you adjust the speed to match your application, making these great for drilling hard materials at slow speeds. Base attaches to flat ferrous surfaces (such as steel and cast iron). Holding force (also called drill point breakaway) is calculated against a 1" thick steel plate. Drills include a spoked feed handle that mounts on either side.

Drill presses for 3/4" and 1 1/4" max. drill bit sizes can be used with carbide-tipped hollow-core cutters.

Drill press for 1/2" max. drill bit size cannot be used with hollow-core cutters. It is not for use with 5/8"-11 and 1/2"-13 taps.

Note: To avoid damaging the electromagnet, do not mount press to a base that has a welder already grounded to it.

									O'all
For Max. Drill Bit Size	For Max. Cutter Dia.	For Max. Bit Shank Size	For Max. Tap Size	Max. No-Load Speed, rpm	Spindle Morse Taper No.	Spindle Travel	Holding Force, lbs.	For Min. Surface Thick.	Lg.	Wd.	Ht.	Wt., lbs.	Manufacturer Model No.	Specifications Met		Each
120V AC
Chuck Spindle Shank
3/4"	2 1/4"	3/4"	1"-14	350	__	11"	1,600	1/2"	17"	7 1/2"	32 1/2"	70	4206-1	UL Listed	0000000	000000000
1/2"	__	1/2"	5/8"-18	600	__	11"	1,600	1/2"	15 1/4"	7 1/2"	29 1/2"	60	4204-1	UL Listed	0000000	00000000
Morse Spindle Shank
1 1/4"	2 1/4"	__	1"-14	750	3	11"	1,600	1/2"	17"	7 1/2"	32 1/2"	70	4209-1	UL Listed	0000000	00000000
1 1/4"	2 1/4"	__	1"-14	500	3	11"	1,600	1/2"	17"	7 1/2"	32 1/2"	70	4208-1	UL Listed	0000000	00000000

Replacement Drill Chuck Key for 3/4" Max. Drill Bit Size	0000000	Each	000000
16 fl. oz. Cutting, Tapping, and Threading Coolant	00000000	Each	00000
Replacement Drill Chuck Key for 1/2" Max. Drill Bit Size	0000000	Each	0000

Fixed-Position Milwaukee Magnetic-Base Drill Presses

Chuck Spindle Shank

Morse Spindle Shank

Switch these drills from forward to reverse without stopping—ideal for both drilling and tapping applications (not recommended for use with pipe taps). In addition, a dial lets you adjust the speed to match your application, making these great for drilling hard materials at slow speeds. Base attaches to flat ferrous surfaces (such as steel and cast iron). Holding force (also called drill point breakaway) is calculated against a 1" thick steel plate. Drills include a spoked feed handle that mounts on either side.

Drill presses for 3/4" and 1 1/4" max. drill bit sizes can be used with carbide-tipped hollow-core cutters.

Drill press for 1/2" max. drill bit size cannot be used with hollow-core cutters. It is not for use with 5/8"-11 and 1/2"-13 taps.

Note: To avoid damaging the electromagnet, do not mount press to a base that has a welder already grounded to it.

									O'all
For Max. Drill Bit Size	For Max. Cutter Dia.	For Max. Bit Shank Size	For Max. Tap Size	Max. No-Load Speed, rpm	Spindle Morse Taper No.	Spindle Travel	Holding Force, lbs.	For Min. Surface Thick.	Lg.	Wd.	Ht.	Wt., lbs.	Manufacturer Model No.	Specifications Met		Each
120V AC
Chuck Spindle Shank
1/2"	__	1/2"	5/8"-18	600	__	9"	1,600	1/2"	14 1/2"	7 1/2"	25 1/2"	50	4202/4253-1	UL Listed	0000000	000000000
3/4"	2 1/4"	3/4"	1"-14	350	__	9"	1,600	1/2"	16 1/4"	7 1/2"	27"	65	4210-1	UL Listed	0000000	00000000
Morse Spindle Shank
1 1/4"	2 1/4"	__	1"-14	750	3	9"	1,600	1/2"	16 1/4"	7 1/2"	27"	65	4202/4292-1	UL Listed	0000000	00000000
1 1/4"	2 1/4"	__	1"-14	500	3	9"	1,600	1/2"	16 1/4"	7 1/2"	27"	65	4202/4297-1	UL Listed	0000000	00000000

Replacement Drill Chuck Key for 1/2" Max. Drill Bit Size	0000000	Each
16 fl. oz. Cutting, Tapping, and Threading Coolant	00000000	Each
Replacement Drill Chuck Key for 3/4" Max. Drill Bit Size	0000000	Each

Hougen Magnetic-Base Drills for Hollow-Core Cutters

These drills work with hollow-core cutters to cut only on the periphery of the hole and produce a solid slug. This allows for a faster and easier cut than drilling with standard drill bits. Also known as magnetic core drilling machines.

They have a feed handle that mounts on the left or right side of the drill. The electromagnetic base attaches to flat ferrous surfaces (such as steel and cast iron). Holding force (also called drill-point breakaway) is calculated against a 1" thick steel plate.

											O'all
	For Max. Cutter Dia.	For Cutter Shank Size	Max. Cutting Dp.	Spindle Travel	Max. No-Load Speed, rpm	No. of Speeds	Current, A	Holding Force, lbs.	For Min. Surface Thick.	Coolant Included	Lg.	Wd.	Ht.	Wt., lbs.	Manufacturer Model No.		Each
120V AC
A	1 1/2"	3/4"	2"	2"	450	1	8	995	3/8"	Yes	11 5/8"	7 3/4"	19 5/8"	30	HMD904	0000000	000000000
B	2 3/8"	3/4"	3"	3"	700	3	12.5	1,290	3/8"	Yes	12 3/4"	8 1/4"	26"	49	HMD920	0000000	00000000
240V AC
B	2 3/8"	3/4"	3"	3"	700	3	6.3	1,290	3/8"	Yes	12 3/4"	8 1/4"	26"	49	HMD920	0000000	00000000

1 gal. Cutting, Tapping, and Threading Coolant	0000000	Each	000000
1.6 fl. oz. Cutting, Tapping, and Threading Coolant	0000000	Each	0000

Jancy Magnetic-Base Drills for Hollow-Core Cutters

They have a feed handle that mounts on the left or right side of the drill. The electromagnetic base attaches to flat ferrous surfaces (such as steel and cast iron).These drills also have a valve to adjust coolant flow. Holding force (also called drill-point breakaway) is calculated against a 1" thick steel plate.

Chucks and adapters (sold separately) allow these models to accept standard drill bits.

											O'all
	For Max. Cutter Dia.	For Cutter Shank Size	Max. Cutting Dp.	Spindle Travel	Max. No-Load Speed, rpm	No. of Speeds	Current, A	Holding Force, lbs.	For Min. Surface Thick.	Coolant Included	Lg.	Wd.	Ht.	Wt., lbs.	Manufacturer Model No.		Each
120V AC
A	1 3/8"	3/4"	2"	5 11/16"	590	1	9.5	2,810	1/2"	No	10 1/4"	3 1/2"	19 3/4"	25.8	JME Holemaker III	0000000	000000000
B	1 1/2"	3/4"	2"	2 9/16"	480	1	9.4	650	3/8"	No	13 5/8"	7 7/8"	17 5/8"	32	JHM USA101	0000000	00000000
C	2 9/16"	3/4"	2"	5 11/16"	520	2	12.6	3,080	1/2"	No	20 1/4"	9 7/8"	23 5/8"	35.5	JCM 256 U	0000000	00000000

1 gal. Cutting, Tapping, and Threading Coolant for Styles B and C	Each	000000
1.6 fl. oz. Cutting, Tapping, and Threading Coolant for Styles B and C	Each	0000
1/2" Chuck and Adapter for Jancy Magnetic-Base Drills JHM USA101	Each	000000
5/8" Chuck and Adapter for Jancy Magnetic-Base Drills JCM 256 U	Each	000000

Chuck and Adapter for Jancy Magnetic-Base Drills

These chucks and adapters will allow your Jancy magnetic-base drills to accept standard drill bits.

	For Machine Spindle
For Max. Bit Shank Size	Shank Type	Shank Dia.	Chuck Key Included	For Manufacturer Model Number		Each
Jancy
1/2"	Straight	1/2"	Yes	JHM USA101	0000000	0000000
5/8"	Straight	3/4"	Yes	JCM 256 U	0000000	000000

Mini Magnetic Drill Base

Drill Not Included

Get the accuracy of a drill press when you use this lightweight, portable drill base with Milwaukee electric drill models 0234-6 and 0244-1. The powerful electromagnetic base firmly attaches to flat, ferrous surfaces such as steel and cast iron. Holding force (also called drill-point breakaway) is calculated against a 1" thick steel plate.

Base Dia.	Base Ht.	Drill Travel	For Min. Surface Thick.	Holding Force, lbs.	Voltage	Toggle Switch Type	Wt., lbs.		Each
4"	2 3/8"	3.9"	0.2"	770	120V AC	On/Off	12	00000000	0000000

Hollow-Core Cutters for Milwaukee Magnetic-Base Drill Presses

Use these cutters with Milwaukee magnetic-base drill presses. They require an arbor adapter (sold separately). Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. They are also known as annular cutters.

Note: These cutters are not for use with Milwaukee magnetic-base drill presses that have a 1/2" max. drill bit size.

		Carbide-Tipped Steel
Dia.	Manufacturer Model Number		Each
2" Cutting Dp.
3/4"	49-57-0750	00000000	000000
13/16"	49-57-0812	00000000	00000
7/8"	49-57-0875	00000000	000000
15/16"	49-57-0937	00000000	000000
1"	49-57-1000	00000000	000000
1 1/16"	49-57-1062	00000000	000000
1 1/8"	49-57-1125	00000000	000000
1 1/4"	49-57-1250	00000000	000000
1 5/16"	49-57-1312	00000000	000000
1 3/8"	49-57-1375	00000000	000000
1 1/2"	49-57-1500	00000000	000000
1 5/8"	49-57-1625	00000000	000000
1 3/4"	49-57-1750	00000000	000000
1 7/8"	49-57-1875	00000000	000000
2"	49-57-2000	00000000	000000
2 1/4"	49-57-2250	00000000	000000

Arbor Adapter with No. 3 Morse Taper Shank	00000000	Each	0000000
Arbor Adapter with 3/4" Dia. Straight Shank	00000000	Each	000000

Arbor Adapters for Milwaukee Hollow-Core Cutters

Arbor Adapter with
Morse Taper
Shank

Arbor Adapter with Straight Shank

These arbor adapters are required when using Milwaukee hollow-core cutters, also known as annular cutters. They come with a pilot pin, which aligns the cutter and ejects the slug.

Morse Taper			For Bit Shank
Number	Dia.	Shank Dia.	Thread Size	Thread Pitch	Overall Lg.	For Cutter Material	Material	Manufacturer	Manufacturer Model Number	For Manufacturer Model Number	Includes		Each
With Morse Taper Shank
3	0.938"	__	M18	1.5mm	10"	Carbide-Tipped Steel	Steel	Milwaukee	49-57-0010	4202, 4208-1, 4209-1, 4292-1, 4297-1	Oil Hose, Oiler, Pilot Pin	00000000	0000000
With Straight Shank
__	__	3/4"	M18	1.5mm	10"	Carbide-Tipped Steel	Steel	Milwaukee	49-57-0030	4206-1, 4210-1	Oil Hose, Oiler, Pilot Pin	00000000	000000

Morse Taper Arbors with Drill Chuck

This arbor with chuck allows drills with a #3 Morse taper spindle to accept standard drill bits.

For Bit Shank Size		For Machine Spindle Morse Taper			Chuck Key				Arbor
Inch	mm	Number	Dia.	Chuck Material	Number	Material	Length	Included	Lg.	Included		Each
3/16"-3/4"	4.5-19	3	0.938"	Steel	K4	Steel	5 3/32"	Yes	5 1/2"	Yes	0000000	0000000