These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting.

IP65 lights are dust tight and protect against low-pressure washdowns, such as water from a garden hose. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Bases allow you to convert Style A lights with a 24" arm reach and Style C lights from a fastener mount to a clamp-on or magnetic mount.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Lights that cannot be sold to California are restricted by local energy efficiency requirements.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Pivot the head to cast a narrow beam of light to exactly where it's needed. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that’s sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Hang these lights where you need them on the job site.

Styles A-E come with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light that highlights white/blue tones, which is good for inspecting. The LEDs in Styles A, B, C, and E are built-in, while Style D come with a replaceable LED bulb. All have an impact-resistant plastic lens to protect the LEDs.

Styles J, K, and L are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550K33 is compatible with medium-base screw-in incandescent and LED bulbs. Styles J and K have a steel guard to protect the bulb. Style L have an impact-resistant plastic lens.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of the lights have a hook for hanging when you need both hands for other work.

Styles D and E lights have built-in LEDs that last longer, are more effiecent, and generate less heat than other light technologies. They have a cool or daylight appearance that highlights white/blue tones, which is good for inspecting. They have an impact-resistant plastic lens to protect the LEDs.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. An impact-resistant plastic lens protects the LEDs. They cast a neutral light that's consistent with the type of light often found in workspaces.

This IP67 rated light withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It's compact for easy transport to job sites with no electrical power. With a head that adjusts up and down, it floods your job site with light. It has a hook and a magnet for mounting, so you can keep your hands free for other work. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. It has a durable tempered-glass lens to protect the LEDs.

Note: Battery life is significantly reduced when lights are used at the high-beam setting.

Free your hands for other work by mounting a flashlight to a nearby surface. Flashlights are sold separately.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board. Put them on the running boards of trucks and other vehicles to improve visibility without limiting ground clearance. They’re good for indoor and outdoor applications requiring resistance to water, impact, and corrosion because their built-in LEDs are sealed in plastic to keep out fluid, dust, dirt, and debris. Rated IP67, they’re dust tight even with continuous airflow and they withstand submersion in one meter of water for 30 minutes. Their LEDs last longer, are more efficient, and generate less heat than other light technologies. They have a daylight appearance, which highlights white and blue tones and is good for inspecting.

Magnetic-mount lights are useful for quick, temporary installations. Apply the included magnetic tape wherever needed, and then stick the light to the tape.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward. These lights are sealed to keep out fluid, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting.

All lights are rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they're built tougher than needed for machine environments.

Style B lights have a magnetic mounting base for quick, temporary installation, as well as through holes for permanent mounting. They have a tempered glass lens that's more durable than acrylic plastic.

Suspend these lights overhead or mount them above your workspace. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. The LEDs produce a cool light appearance that highlights white/blue tones, which is good for inspecting. These lights are furnished with fastener-mount clips; they can also be mounted using the optional adjustable mounting brackets that swivel 180° or the magnetic mounting brackets, both sold separately.

Lights that operate on AC voltage include a 6-ft. power cord. For longer distances, you can swap it for the 10-ft. power cord (sold separately). To link multiple lights using a single electrical outlet, use the 4-pin connecting cord (sold separately); connect a maximum of 10 lights.

Lights that operate on DC voltage require a 4-pole Micro M12 power cord (sold separately) for connecting to a power supply. To link multiple lights using a single power supply, use the 4-pole Micro M12 connecting cord (sold separately); maximum number of connections varies based on your power supply.

For technical drawings and 3-D models, click on a part number.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces. Their built-in LEDs last longer, are more efficient, and generate less heat than fluorescent lights.

Lights with a neutral appearance are good for a balanced work environment. Lights with a cool appearance highlight white/blue tones, which is good for inspecting.

Magnetic-mount lights don’t require drilled holes to install in metal enclosures, so there’s no risk of letting in moisture or dust that could damage your equipment.

Add magnetic mounting brackets to fastener-mount lights for installation in metal enclosures that doesn’t require drilling holes.

Add connector cables to daisy-chain up to 10 lights using a single power source.

For technical drawings and 3-D models, click on a part number.

These lights can switch between continuous, flashing, or revolving. Place them wherever needed—they don't need to be wired or plugged in. The LED bulb provides years of maintenance-free operation.

Lights with a magnetic base can be quickly positioned on metal surfaces.

For technical drawings and 3-D models, click on a part number.

Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle. Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

Plug these into a standard 12-volt vehicle receptacle and mount using the magnetic base. Lights meet NEMA 4X for protection from corrosion and washdowns.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

Plug these into a standard 12-volt vehicle receptacle and mount using the magnetic base. Lights meet NEMA 3 and IP62 for protection from corrosion and wet environments.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

As small as a hockey puck and compatible with standard 12-volt vehicle plugs, these strobe lights are inconspicuous when not in use and quick to connect. Their magnetic base lets you mount them without drilling holes in your surface. They use LED light, which is more efficient and lasts longer than other kinds of light. Rated IP67, they seal out dust and moisture even if there’s continuous airflow or they’re submerged in water for up to 30 minutes. Use them on the exterior of emergency, construction, and farm vehicles without fear of the elements damaging the lights. They don’t contain any moving parts, which helps them last a long time.

Most meet SAE J845, which is a standard for warning lights used on emergency, maintenance, and service vehicles. Class 1 have the brightest light output, so they’re used for emergency vehicles. Class 2 is common for wide-load vehicles. Class 3 is typical on forklifts used inside warehouses.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

A series of four flashes per cycle makes this light more visible than other strobe lights. Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base.

For technical drawings and 3-D models, click on a part number.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights. They’re rated IP65 for protection from dust—even in areas with continuous airflow—and low-pressure jets of water. These strobe lights use an LED bulb that will last for years. Position them quickly with the magnetic-mount base.

For technical drawings and 3-D models, click on a part number.

Carry these lights around with you and place them wherever needed. They can switch between being continuous or flashing. The LED bulb provides years of maintenance-free operation.

For technical drawings and 3-D models, click on a part number.

Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base. The light cycles through three different flashing patterns and has an LED bulb for years of maintenance-free operation.

For technical drawings and 3-D models, click on a part number.

Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base. Lights meet NEMA 3 and IP62 for protection from corrosion and wet environments.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

Place these lights in full sun and their batteries charge during daylight hours. Lights automatically switch on at dusk and off at dawn. They have an LED bulb for years of maintenance-free operation.

Portable lights meet IP67 and have a magnetic base for quick positioning. They can be switched on or off with the press of a button.

For technical drawings and 3-D models, click on a part number.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base.

For technical drawings and 3-D models, click on a part number.