Mounting Style Mounting Style |
---|
![]() | ![]() |
Flush | Surface |
![]() | ![]() |
Offset | Mortise |
![]() | |
Through Hole |
Holding Strength Holding Strength |
---|
|
Maximum Pull Strength Maximum Pull Strength |
---|
Strike Plate Height Strike Plate Height |
---|
|
|
|
Width Width |
---|
Strike Plate Width Strike Plate Width |
---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
---|
|
|
|
Depth Depth |
---|
|
|
|
Strike Plate Material Strike Plate Material |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Padlocks
More
About Cam Latches and Locks
More
Electromagnetic Door Locks


For use alone or as part of an access-control system, these locks use electromagnetic force to hold single doors closed. Control the locks with a push-button switch or keypad door control (sold separately). When power is interrupted, they instantly release. All locks must be hardwired.
Flush mount locks mount under the door frame header. For locks with 500 lbs. and 1,500 lbs. of holding strength, a 5/8" thick filler plate (sold separately) is required if the mounting surface on the frame is less than 2" wide.
Offset mount locks mount on the door frame header and include a mounting bracket that extends the strike plate above the door.
Locks with instant locking action lock doors as soon as they are closed. Those with delayed locking action lock doors after a set amount of time.
Optional battery backup packs supply power during power interruptions.
For technical drawings and 3-D models, click on a part number.
Electromagnet | Strike Plate | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Locking Action | Delayed Locking Time | Holding Strength | Voltage | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Mounting Hardware Included | Each | |
Flush Mount | ||||||||||||
RCI 8375 | ||||||||||||
Instant | __ | 300 lbs. | 12V DC-24V DC | 1 1/2" | 6 9/16" | 13/16" | 1 1/4" | 5 1/8" | 3/8" | Yes | 00000000 | 0000000 |
Schlage M420 | ||||||||||||
Instant | __ | 500 lbs. | 12V DC-24V DC | 2 1/2" | 9" | 1 1/2" | 1 3/4" | 5 5/16" | 5/8" | Yes | 00000000 | 000000 |
Schlage M490P | ||||||||||||
Delayed | 0.5 sec.-30 sec. | 1,500 lbs. | 12V DC-24V DC | 3" | 12 1/2" | 1 3/4" | 2 1/4" | 8 3/4" | 1/2" | Yes | 0000000 | 000000 |
Offset Mount | ||||||||||||
RCI 8375 | ||||||||||||
Instant | __ | 300 lbs. | 12V DC-24V DC | 1 1/2" | 6 9/16" | 13/16" | 1 1/4" | 5 1/8" | 3/8" | Yes | 00000000 | 000000 |
Schlage M420 | ||||||||||||
Instant | __ | 500 lbs. | 12V DC-24V DC | 2 1/2" | 9" | 1 1/2" | 1 3/4" | 5 5/16" | 5/8" | Yes | 00000000 | 000000 |
Schlage M490P | ||||||||||||
Delayed | 0.5 sec.-30 sec. | 1,500 lbs. | 12V DC-24V DC | 3" | 12 1/2" | 1 3/4" | 2 1/4" | 8 3/4" | 1/2" | Yes | 0000000 | 000000 |
Electromagnetic Locks for Double Doors

For use alone or as part of an access-control system, these locks use electromagnetic force to hold double doors closed. Control the locks with a push-button switch or keypad door control (sold separately). When power is interrupted, they instantly release. The locks must be hardwired.
Locks include two strike plates to control two doors at once. They mount under the door frame header and lock the instant doors are closed. A 5/8" thick filler plate (sold separately) is required if the mounting surface on the frame is less than 2" wide.
Optional battery backup packs supply power during power interruptions.
For technical drawings and 3-D models, click on a part number.
Electromagnet | Strike Plate | Flush Mount | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Locking Action | Holding Strength | Voltage | Ht. | Wd. | Dp. | Ht. | Lg. | Dp. | Mounting Hardware Included | Each | |
Schlage M492 | |||||||||||
Instant | 1,500 lbs. | 12V DC-24V DC | 3" | 25 1/16" | 1 3/4" | 2 1/4" | 8 3/4" | 1/2" | Yes | 0000000 | 000000000 |
Magnetic Latches













Magnetic force holds doors closed. These latches can often be found on audio/visual cabinets. Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.
Styles 2 and 7 have a two-piece strike plate for double doors that meet in the center.
For technical drawings and 3-D models, click on a part number.








Magnetic Latches | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Strike Plate | Mounting | Replacement Strike Plates | |||||||||||||||
Style | Max. Pull Strength, lbs. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Material | Ht. | Wd. | Dp. | Dia. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Each | Each | ||
Aluminum | |||||||||||||||||
1 | 7 | 3/4" | 2 1/16" | 1" | 7/16", 1 11/16" | Steel | 13/16" | 1 1/8" | __ | __ | __ | Yes | No. 6, No. 8 | 0000000 | 00000 | 000000 | 00 |
1 | 13 | 3/4" | 2 1/16" | 1" | 7/16", 1 11/16" | Steel | 13/16" | 1 1/8" | __ | __ | __ | Yes | No. 4, No. 6 | 0000000 | 0000 | 000000 | 00 |
Brass | |||||||||||||||||
1 | 34 | 15/16" | 3 1/2" | 2" | 7/8", 2 13/16" | Steel | 3/4" | 2 11/16" | __ | __ | 2 5/16" | Yes | No. 5, No. 6 | 000000 | 00000 | 000000 | 00 |
Chrome-Plated Brass | |||||||||||||||||
1 | 34 | 15/16" | 3 1/2" | 2" | 7/8", 2 13/16" | Steel | 3/4" | 2 11/16" | __ | __ | 2 5/16" | Yes | No. 5, No. 6 | 000000 | 00000 | 000000 | 00 |
Beige Plastic | |||||||||||||||||
1 | 6 | 1/2" | 2 1/8" | 1 1/16" | 1 5/8" | Steel | 7/8" | 1 3/16" | __ | __ | __ | Yes | No. 4, No. 8 | 0000000 | 0000 | 000000 | 00 |
1 | 15 | 9/16" | 2 1/8" | 7/8" | 1 5/8" | Steel | 13/16" | 1" | __ | __ | __ | Yes | No. 6 | 0000000 | 0000 | 000000 | 00 |
8 | 5 | 3/4" | 2" | 7/16" | 1 1/2" | Steel | 3/4" | 1 1/8" | 3/4" | __ | 3/4" | Yes | No. 8 | 00000000 | 0000 | 000000 | 00 |
White Plastic | |||||||||||||||||
1 | 2 | 1/4" | 1 7/16" | 1/2" | 1" | Zinc-Plated Steel | 7/16" | 1 3/16" | 1/16" | __ | 13/16" | Yes | M2.9, M3 | 0000000 | 0000 | 0000000 | 00000 |
1 | 6 | 1/4" | 1 7/16" | 1/2" | 1" | Zinc-Plated Steel | 7/16" | 1 3/16" | 1/16" | __ | 13/16" | Yes | M2.9, M3 | 0000000 | 0000 | 0000000 | 0000 |
2 | 11 | 1/2" | 3 3/8" | 11/16" | 3" | Stainless Steel | 7/16" | 1 3/16" | __ | __ | 13/16" | Yes | M2.6 | 0000000 | 0000 | 0000000 | 0000 |
2 | 12 | 5/8" | 4 3/16" | 13/16" | 3 11/16" | Stainless Steel | 9/16" | 1 1/2" | __ | __ | 1" | Yes | M2.6 | 0000000 | 00000 | 0000000 | 0000 |
Stainless Steel | |||||||||||||||||
2 | 10 | 1/2" | 3 1/8" | 11/16" | 2 3/4" | Steel | 5/8" | 1" | __ | __ | __ | Yes | M3 | 0000000 | 0000 | 000000 | 00 |
3 | 6 | 1/2" | 1 3/8" | 1/8" | 1" | Stainless Steel | 9/16" | 1 3/8" | 1/16" | __ | 1" | Yes | M3 | 0000000 | 00000 | 0000000 | 000 |
Steel | |||||||||||||||||
3 | 4 | 3/8" | 1 7/16" | 3/16" | 1 1/8" | Stainless Steel | 5/8" | 1 15/16" | __ | __ | 1 9/16" | No | M3 | 0000000 | 0000 | 0000000 | 0000 |
304 Stainless Steel | |||||||||||||||||
3 | 7 | 7/16" | 1 9/16" | 1/4" | 1 3/16" | Stainless Steel | 5/8" | 1 15/16" | __ | __ | 1 9/16" | No | M4.2 | 0000000 | 0000 | 0000000 | 0000 |
430 Stainless Steel | |||||||||||||||||
3 | 11 | 11/16" | 1 5/8" | 1/8" | 1 1/8" | Nickel-Plated Steel | 5/8" | 1 3/16" | 1/16" | __ | 5/8" | Yes | M3 | 0000000 | 00000 | 0000000 | 000 |
Nickel-Plated Brass | |||||||||||||||||
3 | 22 | 11/16" | 3 1/8" | 1/2" | 2 3/4" | Steel | 5/8" | 2 3/16" | __ | __ | 1 3/8" | No | M3 | 0000000 | 0000 | 0000000 | 0000 |
Nickel-Plated Steel | |||||||||||||||||
3 | 3 | 11/16" | 1 5/8" | 1/8" | 1 1/8" | Nickel-Plated Steel | 5/8" | 1 3/16" | 1/16" | __ | 5/8" | Yes | M3 | 0000000 | 0000 | 0000000 | 000 |
3 | 6 | 1/2" | 1 3/8" | 1/8" | 1" | Steel | 9/16" | 1 3/8" | __ | __ | 1" | Yes | M3 | 0000000 | 0000 | 0000000 | 000 |
3 | 9 | 11/16" | 1 11/16" | 1/8" | 1 1/8" | Steel | 5/8" | 1 3/16" | __ | __ | 5/8" | Yes | M3 | 0000000 | 0000 | 0000000 | 000 |
3 | 17 | 11/16" | 1 5/8" | 1/8" | 1 1/8" | Nickel-Plated Steel | 5/8" | 1 3/16" | 1/16" | __ | 5/8" | Yes | M3 | 0000000 | 0000 | 0000000 | 000 |
Zinc | |||||||||||||||||
4 | 6.6 | 13/16" | 1 9/16" | 7/8" | 1 3/16" | Steel | 3/4" | 7/8" | __ | __ | 1/2" | No | No. 4 | 00000000 | 00000 | 0000000 | 0000 |
4 | 15.4 | 13/16" | 2" | 7/8" | 1 9/16" | Steel | 3/4" | 1 1/8" | __ | __ | 11/16" | No | No. 4 | 00000000 | 00000 | 0000000 | 0000 |
4 | 24 | 13/16" | 2 7/16" | 7/8" | 2" | Steel | 3/4" | 1 3/4" | __ | __ | 1 1/8" | No | No. 4 | 00000000 | 00000 | 0000000 | 0000 |
4 | 31 | 13/16" | 3 3/16" | 7/8" | 2 3/4" | Steel | 3/4" | 2 3/8" | __ | __ | 1 5/8" | No | No. 4 | 00000000 | 00000 | 0000000 | 0000 |
Black Zinc-Plated Steel | |||||||||||||||||
5 | 6 | 5/16" | 1" | 15/16" | __ | Steel | 13/16" | 1 1/8" | __ | __ | __ | Yes | No. 5, No. 6 | 0000000 | 0000 | 000000 | 00 |
7 | 11 | 5/16" | 2" | 13/16" | 1" | Steel | 13/16" | 2" | __ | __ | 1 1/4" | Yes | No. 6 | 0000000 | 0000 | 000000 | 00 |
7 | 22 | 5/16" | 3" | 13/16" | 2" | Steel | 13/16" | 3" | __ | __ | 2" | Yes | No. 6 | 0000000 | 0000 | 000000 | 00 |
Brown Plastic | |||||||||||||||||
10 | 8 | 11/16" | 1 1/4" | 7/8" | 15/16" | Steel | __ | __ | __ | 1/2" | __ | No | No. 5 | 00000000 | 0000 | 000000 | 00 |



Magnetic Latches | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Strike Plate | Mounting | Replacement Strike Plates | ||||||||||||||||
Style | Max. Pull Strength, lbs. | Material | Ht. | Wd. | Dp. | Material | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | For Cutout Dia. | For Panel Thickness | Each | Each | ||
11 | 0.9 | Black Plastic | 1/4" | 1/2" | 5/16" | Black Copper-Plated Steel | 9/16" | 1 3/8" | 1/16" | 1" | Yes | M4 | __ | 0.078" | 0000000 | 00000 | 0000000 | 00000 |
12 | 1 | Black Plastic | 5/16" | 15/16" | 9/16" | Zinc-Plated Steel | 5/16" | 1" | 1/16" | __ | Yes | __ | __ | 0.035" | 0000000 | 0000 | 0000000 | 0000 |
12 | 1 | Black Plastic | 5/16" | 15/16" | 9/16" | Zinc-Plated Steel | 5/16" | 1" | 1/16" | __ | Yes | __ | __ | 0.095" | 0000000 | 0000 | 0000000 | 0000 |
12 | 10 | Black Plastic | 3/8" | 1 9/16" | 1" | Zinc-Plated Steel | 3/4" | 1 1/4" | 1/16" | __ | Yes | __ | __ | 0.04" | 0000000 | 0000 | 0000000 | 0000 |
12 | 10 | Black Plastic | 3/8" | 1 9/16" | 1" | Zinc-Plated Steel | 3/4" | 1 1/4" | 1/16" | __ | Yes | __ | __ | 0.1" | 0000000 | 0000 | 0000000 | 0000 |
12 | 10 | Black Plastic | 3/8" | 1 9/16" | 1" | Zinc-Plated Steel | 3/4" | 1 1/4" | 1/16" | __ | Yes | __ | __ | 0.16" | 0000000 | 0000 | 0000000 | 0000 |
12 | 14 | Black Plastic | 7/16" | 2 5/16" | 13/16" | Zinc-Plated Steel | 3/4" | 2" | 1/16" | __ | Yes | __ | __ | 0.01" | 0000000 | 0000 | 0000000 | 0000 |
12 | 14 | Black Plastic | 7/16" | 2 5/16" | 13/16" | Zinc-Plated Steel | 3/4" | 2" | 1/16" | __ | Yes | __ | __ | 0.07" | 0000000 | 0000 | 0000000 | 0000 |
12 | 14 | Black Plastic | 7/16" | 2 5/16" | 13/16" | Zinc-Plated Steel | 3/4" | 2" | 1/16" | __ | Yes | __ | __ | 0.13" | 0000000 | 0000 | 0000000 | 0000 |
12 | 23 | Black Plastic | 7/8" | 2 5/16" | 13/16" | Zinc-Plated Steel | 3/4" | 2" | 1/16" | __ | Yes | __ | __ | 0.01" | 0000000 | 00000 | 0000000 | 0000 |
12 | 23 | Black Plastic | 7/8" | 2 5/16" | 13/16" | Zinc-Plated Steel | 3/4" | 2" | 1/16" | __ | Yes | __ | __ | 0.07" | 0000000 | 00000 | 0000000 | 0000 |
12 | 23 | Black Plastic | 7/8" | 2 5/16" | 13/16" | Zinc-Plated Steel | 3/4" | 2" | 1/16" | __ | Yes | __ | __ | 0.13" | 0000000 | 00000 | 0000000 | 0000 |
13 | 4 | Black Plastic | __ | __ | 7/8" | Zinc-Plated Steel | 5/16" | 1" | 1/16" | __ | Yes | __ | 9/16" | 0.03" | 0000000 | 0000 | 0000000 | 0000 |
13 | 4 | Black Plastic | __ | __ | 7/8" | Zinc-Plated Steel | 5/16" | 1" | 1/16" | __ | Yes | __ | 9/16" | 0.09" | 0000000 | 0000 | 0000000 | 0000 |
13 | 4 | Black Plastic | __ | __ | 7/8" | Zinc-Plated Steel | 5/16" | 1" | 1/16" | __ | Yes | __ | 9/16" | 0.15" | 0000000 | 0000 | 0000000 | 0000 |
13 | 11 | Black Plastic | __ | __ | 1 3/8" | Zinc-Plated Steel | 3/4" | 1 1/4" | 1/16" | __ | Yes | __ | 7/8" | 0.02" | 0000000 | 00000 | 0000000 | 0000 |
13 | 11 | Black Plastic | __ | __ | 1 3/8" | Zinc-Plated Steel | 3/4" | 1 1/4" | 1/16" | __ | Yes | __ | 7/8" | 0.08" | 0000000 | 0000 | 0000000 | 0000 |
13 | 11 | Black Plastic | __ | __ | 1 3/8" | Zinc-Plated Steel | 3/4" | 1 1/4" | 1/16" | __ | Yes | __ | 7/8" | 0.14" | 0000000 | 00000 | 0000000 | 0000 |
Food Industry Magnetic Latches


Made to NSF/ANSI standards, this latch has a completely sealed magnet to eliminate crevices that can trap food particles. Magnetic force holds doors closed.
Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pull Strength, lbs. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Mounting Hole Diameter, mm | Material | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Specifications Met | Each | ||
Light Gray Plastic | |||||||||||||||
1 | 3 | 9/16" | 2 1/2" | 3/4" | 2 1/16" | 4.2 | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | M4, No. 6 | NSF/ANSI 2 | 0000000 | 000000 |
1 | 7 | 9/16" | 2 1/2" | 3/4" | 2 1/16" | 4.2 | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | M4, No. 6 | NSF/ANSI 2 | 0000000 | 00000 |
1 | 11 | 9/16" | 2 1/2" | 3/4" | 2 1/16" | 4.2 | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | M3.5, No. 6 | NSF/ANSI 2 | 0000000 | 00000 |
Light Gray Rubber | |||||||||||||||
2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
Dark Gray Rubber | |||||||||||||||
2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
Blue Rubber | |||||||||||||||
2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
Clean Room Magnetic Latches




To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate. Magnetic force holds doors closed.
On latches with a pivoting strike plate, the strike plate moves for better contact with the magnetic latch.
Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pull Strength, lbs. | Material | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Mounting Hole Diameter | Material | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Features | Each | ||
1 | 7 | White Plastic | 11/16" | 1 13/16" | 1/4" | 1 3/16" | 4.4mm, 9.6mm | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | No. 6, No. 8 | __ | 0000000 | 000000 |
2 | 7 | White Plastic | 3/4" | 1 3/4" | 1 1/16" | 1 3/16" | 4.4mm, 8.4mm | Stainless Steel | 11/16" | 1 3/4" | 1" | Yes | No. 6 | Pivoting Strike Plate | 0000000 | 00000 |
3 | 7 | Black Plastic | 1/2" | 2" | 13/16" | 1 9/16" | 4.4mm | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | M4, No. 6 | __ | 0000000 | 00000 |
3 | 7 | White Plastic | 9/16" | 2" | 7/8" | 1 9/16" | 4.4mm, 9.6mm | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | M4, No. 6 | __ | 0000000 | 00000 |
4 | 6 | Black Plastic | 5/16" | 1 7/8" | 11/16" | __ | __ | Stainless Steel | 3/8" | 2 1/8" | __ | __ | __ | Pivoting Strike Plate | 0000000 | 00000 |
4 | 6 | White Plastic | 5/16" | 1 7/8" | 11/16" | __ | __ | Stainless Steel | 3/8" | 2 1/8" | __ | __ | __ | Pivoting Strike Plate | 0000000 | 00000 |
High-Temperature Magnetic Latches


These latches withstand temperatures up to 480° or 570° F. They have a magnetic force that holds doors closed.
Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Temperature Range, F° | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pull Strength, lbs. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Mounting Hole Diameter | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Min. | Max. | Fasteners Included | Screw Size | Each | |
Aluminum | ||||||||||||||
11 | 1/2" | 1 3/4" | 1/2" | 1 7/16" | 3.5 mm | 1/2" | 1 9/16" | 1 3/16" | Not Rated | 570° | No | No. 4 | 0000000 | 00000 |
304 Stainless Steel | ||||||||||||||
4 | 7/16" | 1 9/16" | 5/16" | 1 3/16" | 4.2 mm | 5/8" | 1 15/16" | 1 9/16" | -145° | 480° | No | No. 6, No. 8 | 0000000 | 00000 |
11 | 7/16" | 1 9/16" | 5/16" | 1 3/16" | 4.2 mm | 5/8" | 1 15/16" | 1 9/16" | -145° | 480° | No | No. 6, No. 8 | 0000000 | 00000 |
15 | 11/16" | 2" | 9/16" | 1 9/16" | 3.5 mm | 5/8" | 1 15/16" | 1 9/16" | -145° | 480° | No | No. 6 | 0000000 | 00000 |
31 | 11/16" | 2" | 9/16" | 1 9/16" | 3.5 mm | 5/8" | 1 15/16" | 1 9/16" | -145° | 480° | No | No. 6 | 0000000 | 00000 |
Push-to-Open Magnetic Latches






Close and open these magnetic latches with a push—there's no need for a handle. Magnetic force holds doors closed. Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.
Each latch has a wraparound and flat strike plate. Styles 5 and 6 have two-piece strike plates for double doors that meet in the center.
For technical drawings and 3-D models, click on a part number.

Wraparound Strike Plate | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Pull Strength | Material | Ht. | Wd. | Dp. | For Cutout Dia. | For Panel Thick. | Ht. | Wd. | Flat Strike Plate Dia. | Mounting Fasteners Included | Each | |
Painted Steel Strike Plate | |||||||||||||
1 | Not Rated | Black Plastic | 9/16" | 7/16" | 1 1/16" | 13/32" | 3/16", 1/4" | 1" | 1 5/8" | 11/16" | No | 00000000 | 00000 |
Brass-Plated Steel Strike Plate | |||||||||||||
1 | Not Rated | Black Plastic | 9/16" | 7/16" | 1 1/16" | 13/32" | 3/16", 1/4" | 1" | 1 5/8" | 11/16" | No | 00000000 | 0000 |
Chrome-Plated Steel Strike Plate | |||||||||||||
1 | Not Rated | Black Plastic | 9/16" | 7/16" | 1 1/16" | 13/32" | 3/16", 1/4" | 1" | 1 5/8" | 11/16" | No | 00000000 | 0000 |

Wraparound Strike Plate | Mounting | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Pull Strength, lbs. | Material | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Mounting Hole Diameter | For Cutout Dia. | For Panel Thick. | Ht. | Wd. | Flat Strike Plate Dia. | Fasteners Included | Screw Size | Each | |
Painted Steel Strike Plate | ||||||||||||||||
2 | 1 | Black Plastic | 5/8" | 1 3/8" | 1 7/8" | 15/16" | 1/8" | 19/32" | 3/16", 1/4" | 1" | 1 5/8" | 11/16" | No | No. 5 | 00000000 | 00000 |
Brass-Plated Steel Strike Plate | ||||||||||||||||
2 | 1 | Black Plastic | 5/8" | 1 3/8" | 1 7/8" | 15/16" | 1/8" | 19/32" | 3/16", 1/4" | 1" | 1 5/8" | 11/16" | No | No. 5 | 00000000 | 0000 |
Chrome-Plated Steel Strike Plate | ||||||||||||||||
2 | 1 | Black Plastic | 5/8" | 1 3/8" | 1 7/8" | 15/16" | 1/8" | 19/32" | 3/16", 1/4" | 1" | 1 5/8" | 11/16" | No | No. 5 | 00000000 | 0000 |




Wraparound Strike Plate | Flat Strike Plate | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Pull Strength, lbs. | Material | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Mounting Hole Diameter | For Panel Thick. | Ht. | Wd. | Ht. | Wd. | Mounting Fasteners Included | Each | |
Painted Steel Strike Plate | |||||||||||||||
3 | 3 | Black Plastic | 5/8" | 1 1/8" | 1 13/16" | 11/16", 7/8" | 1/8", 11/16" | 3/16", 1/4" | 1" | 1 5/8" | 1/2" | 1 3/8" | Yes | 0000000 | 00000 |
4 | 3 | Black Plastic | 3/4" | 1 5/8" | 1 3/4" | 1 1/4" | 9/64", 1/4" | 3/16", 1/4" | 1" | 1 5/8" | 7/8" | 1 3/16" | Yes | 0000000 | 0000 |
5 | 4 | Black Plastic | 11/16" | 2 5/16" | 1 13/16" | 3/4", 2" | 1/8", 11/16" | 3/16", 1/4" | 1" | 1 5/8" | 1/2" | 1 3/8" | Yes | 0000000 | 0000 |
6 | 4 | Black Plastic | 3/4" | 2 15/16" | 1 3/4" | 1 1/4", 2 1/2" | 5/32", 17/64" | 3/16", 1/4" | 1" | 1 5/8" | 7/8" | 1 3/16" | Yes | 0000000 | 0000 |
Brass-Plated Steel Strike Plate | |||||||||||||||
3 | 3 | Black Plastic | 5/8" | 1 1/8" | 1 13/16" | 11/16", 7/8" | 1/8", 11/16" | 3/16", 1/4" | 1" | 1 5/8" | 1/2" | 1 3/8" | Yes | 0000000 | 0000 |
4 | 3 | Black Plastic | 3/4" | 1 5/8" | 1 3/4" | 1 1/4" | 9/64", 1/4" | 3/16", 1/4" | 1" | 1 5/8" | 7/8" | 1 3/16" | Yes | 0000000 | 0000 |
5 | 4 | Black Plastic | 11/16" | 2 5/16" | 1 13/16" | 3/4", 2" | 1/8", 11/16" | 3/16", 1/4" | 1" | 1 5/8" | 1/2" | 1 3/8" | Yes | 0000000 | 0000 |
6 | 4 | Black Plastic | 3/4" | 2 15/16" | 1 3/4" | 1 1/4", 2 1/2" | 5/32", 17/64" | 3/16", 1/4" | 1" | 1 5/8" | 7/8" | 1 3/16" | Yes | 0000000 | 0000 |
Chrome-Plated Steel Strike Plate | |||||||||||||||
3 | 3 | Black Plastic | 5/8" | 1 1/8" | 1 13/16" | 11/16", 7/8" | 1/8", 11/16" | 3/16", 1/4" | 1" | 1 5/8" | 1/2" | 1 3/8" | Yes | 0000000 | 0000 |
4 | 3 | Black Plastic | 3/4" | 1 5/8" | 1 3/4" | 1 1/4" | 9/64", 1/4" | 3/16", 1/4" | 1" | 1 5/8" | 7/8" | 1 3/16" | Yes | 0000000 | 0000 |
5 | 4 | Black Plastic | 11/16" | 2 5/16" | 1 13/16" | 3/4", 2" | 1/8", 11/16" | 3/16", 1/4" | 1" | 1 5/8" | 1/2" | 1 3/8" | Yes | 0000000 | 0000 |
6 | 4 | Black Plastic | 3/4" | 2 15/16" | 1 3/4" | 1 1/4", 2 1/2" | 5/32", 17/64" | 3/16", 1/4" | 1" | 1 5/8" | 7/8" | 1 3/16" | Yes | 0000000 | 0000 |
Weather-Resistant Key-Fob Cam Locks

Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants. To unlock them, connect and turn the magnetic key fob. Set the turn direction when mounting the cam. These locks come with a straight cam and a reversible offset cam to accommodate different latching distances.
Straight Cam | Offset Cam | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Maximum Thickness | Latching Distance | For Through Hole Diameter | Head Diameter | Length | Width | Length | Width | Mounting Fasteners Included | For Use On | Each | |
Nickel-Plated Zinc—Dull | |||||||||||
3/8" | 5/8", 7/8" | 3/4" | 15/16" | 1 1/4" | 5/8" | 1 1/4" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 000000 |
5/8" | 7/8", 1 1/8" | 3/4" | 15/16" | 1 1/4" | 5/8" | 1 1/4" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
7/8" | 1 1/8", 1 3/8" | 3/4" | 15/16" | 1 1/4" | 5/8" | 1 1/4" | 5/8" | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
Electromagnetic Gate Locks


For use alone or as part of an access-control system, this lock uses electromagnets to hold gates closed. Control the lock with a push-button switch or keypad control (sold separately). It locks automatically as soon as the gate is closed. When power is interrupted, the lock instantly releases.
Optional backup battery pack supplies power during power interruptions.
Filler plate is required if the mounting surface is less than 2" wide.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Electromagnet | Strike Plate | Optional Backup Battery Packs | Filler Plates | |||||||||||||
Locking Action | Holding Strength, lbs. | Voltage | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Mounting Fasteners Included | Electrical Connection Type | Each | Each | Each | |||
Schlage M490G | ||||||||||||||||
Instant | 1,500 | 12V DC-24V DC | 11" | 3" | 1 3/4" | 10 1/2" | 2 5/8" | 1" | Yes | Hardwire | 00000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |
Weather-Resistant Key-Fob Padlocks
Padlock doors and other objects without worrying about the lock being picked or having to remember combinations. These padlocks unlock with a magnetic key fob. They have a brass body, which resists corroding from the weather. The stainless steel shackle resists rusting, but is easier to cut than other materials, such as boron alloy. Replace the shackle after damage or if you need a different vertical clearance.