Thickness Thickness |
|---|
|
|
|
Material Material |
|---|
|
Appearance Appearance |
|---|
|
Shape Shape |
|---|
 |  |
| Sheet and Bar | 90° Angle |
 |  |
| Round Tube | Foil |
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Yield Strength Yield Strength |
|---|
|
|
Temper Rating Temper Rating |
|---|
|
Fabrication Fabrication |
|---|
|
Wall Thickness Wall Thickness |
|---|
|
|
|
ID ID |
|---|
Hardness Hardness |
|---|
|
Specifications Met Specifications Met |
|---|
|
About Aluminum
More
Easy-to-Form Marine-Grade
5086 Aluminum Sheets and Bars
- Yield Strength: 17,000 psi
- Hardness: Not Rated
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
| Thick. | Thick. Tolerance | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | 48" × 48" | |
| 0.063" | -0.003" to 0.003" | 0000000 | ||||||||||
| 0.090" | -0.005" to 0.005" | 0000000 | ||||||||||
| 0.125" | -0.006" to 0.006" | 0000000 | ||||||||||
| 0.190" | -0.009" to 0.009" | 0000000 | ||||||||||
| 0.250" | -0.015" to 0.015" | 0000000 | ||||||||||
| 0.375" | -0.017" to 0.017" | 0000000 | ||||||||||
| 0.500" | -0.023" to 0.023" | 0000000 | ||||||||||
| 0.750" | -0.031" to 0.031" | 0000000 | ||||||||||
| 1.000" | -0.039" to 0.039" | 0000000 |
Easy-to-Form Marine-Grade 5086 Aluminum 90° Angles
- Yield Strength: 21,000 psi
- Hardness: Not Rated
- Temper: H111 (1/8 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B221
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Wall Thick. (-0.012" to 0.012" Tolerance) | ||||||||||
| 1" | -0.033" to 0.033" | 1" | -0.033" to 0.033" | 0.88" | 0.88" | 0.013" per ft. | 0000000 | |||
| 1 1/2" | -0.033" to 0.033" | 1 1/2" | -0.033" to 0.033" | 1.38" | 1.38" | 0.013" per ft. | 0000000 | |||
1/4" Wall Thick. (-0.012" to 0.012" Tolerance) | ||||||||||
| 1 1/4" | -0.033" to 0.033" | 1 1/4" | -0.033" to 0.033" | 1.00" | 1.00" | 0.013" per ft. | 0000000 | |||
| 2" | -0.033" to 0.033" | 2" | -0.033" to 0.033" | 1.75" | 1.75" | 0.013" per ft. | 0000000 | |||
| 3" | -0.033" to 0.033" | 3" | -0.033" to 0.033" | 2.75" | 2.75" | 0.013" per ft. | 0000000 | |||
| 4" | -0.033" to 0.033" | 4" | -0.033" to 0.033" | 3.75" | 3.75" | 0.013" per ft. | 0000000 | |||
Easy-to-Form Marine-Grade 5086 Aluminum Tubes
- Yield Strength: 28,000 psi
- Hardness: Not Rated
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B210
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
| Wall Thick. | Wall Thick. Tolerance | OD | OD Tolerance | ID | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 0.113" | -0.014" to 0.014" | 1.050" | -0.008" to 0.008" | 0.824" | 0.010" per ft. | 0000000 | |||
| 0.133" | -0.017" to 0.017" | 1.315" | -0.008" to 0.008" | 1.049" | 0.010" per ft. | 0000000 | |||
| 0.140" | -0.018" to 0.018" | 1.660" | -0.008" to 0.008" | 1.380" | 0.010" per ft. | 0000000 | |||
| 0.145" | -0.018" to 0.018" | 1.900" | -0.008" to 0.008" | 1.610" | 0.010" per ft. | 0000000 | |||
| 0.154" | -0.019" to 0.019" | 2.375" | -0.008" to 0.008" | 2.067" | 0.010" per ft. | 0000000 | |||
| 0.179" | -0.022" to 0.022" | 1.315" | -0.008" to 0.008" | 0.957" | 0.010" per ft. | 0000000 | |||
| 0.191" | -0.024" to 0.024" | 1.660" | -0.008" to 0.008" | 1.278" | 0.010" per ft. | 0000000 | |||
| 0.200" | -0.025" to 0.025" | 1.900" | -0.008" to 0.008" | 1.500" | 0.010" per ft. | 0000000 | |||
| 0.203" | -0.025" to 0.025" | 2.875" | -0.008" to 0.008" | 2.469" | 0.010" per ft. | 0000000 | |||
| 0.216" | -0.027" to 0.027" | 3.500" | -0.008" to 0.008" | 3.068" | 0.010" per ft. | 0000000 | |||
| 0.218" | -0.027" to 0.027" | 2.375" | -0.008" to 0.008" | 1.939" | 0.010" per ft. | 0000000 | |||
| 0.276" | -0.034" to 0.034" | 2.875" | -0.008" to 0.008" | 2.323" | 0.010" per ft. | 0000000 | |||
| 0.300" | -0.037" to 0.037" | 3.500" | -0.008" to 0.008" | 2.900" | 0.010" per ft. | 0000000 |
Easy-to-Weld 5052 Aluminum Bars with Certification
- Yield Strength: 28,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
These bars come with a traceable lot number and test report. They are saw cut to the widths and lengths listed. Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
| Wd. | Temperature Range, °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.007" to 0.007" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | -300° to 300° | 000000 | |||||
| 3/4" | -300° to 300° | 000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
3/16" Thick. (-0.01" to 0.01" Tolerance) | |||||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
1/4" Thick. (-0.015" to 0.015" Tolerance) | |||||||
| 1/2" | -300° to 300° | 0000000 | |||||
| 3/4" | -300° to 300° | 0000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
Polished Easy-to-Weld 5052 Aluminum Sheets and Bars
- Yield Strength: 20,000 psi
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish. The polished side is covered with a protective, peel-off film. Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Brushed sheets and bars are polished to a #4 satin finish with grain lines running in one direction to mask fingerprints.
Mirror-like sheets and bars are polished to a #8 reflective finish and are free of grain lines.
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | |
Brushed | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Mirror-Like | |||||||||||
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Easy-to-Weld 5052 Aluminum Sheets
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
- Yield Strength: 47,000 psi
- Hardness: Brinell 90 (Soft)
- Temper: H19 (Full Hard)
- Fabrication: Cold Rolled
- Yield Strength: 23,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | 48" × 48" | |
| 0.032" | -0.003" to 0.003" | -300° to 300° | 000000000 | ||||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.062" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.100" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 000000000 | ||||||||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | ||||||||||
| 1/4" | -0.015" to 0.015" | -300° to 300° | 000000000 | ||||||||||
| 3/8" | -0.02" to 0.02" | -300° to 300° | 000000000 | ||||||||||
| 1/2" | -0.027" to 0.027" | -300° to 300° | 000000000 |
Easy-to-Weld 5052 Aluminum Tubes
- Yield Strength: 10,000 psi
- Hardness: Not Rated
- Temper: O (Annealed)
- Specifications Met: ASTM B210
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
| OD | OD Tolerance | ID | ID Tolerance | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.035" Wall Thick. (-0.002" to 0.002" Tolerance) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | -0.004" to 0.004" | 0.180" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.305" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.680" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.930" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.049" Wall Thick. (-0.003" to 0.003" Tolerance) | ||||||||||
| 1/4" | -0.004" to 0.004" | 0.152" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.277" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1/2" | -0.004" to 0.004" | 0.402" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.652" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.902" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.065" Wall Thick. (-0.004" to 0.004" Tolerance) | ||||||||||
| 1/2" | -0.004" to 0.004" | 0.370" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 5/8" | -0.004" to 0.004" | 0.495" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.870" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
Marine-Grade 5083 Aluminum Sheets and Bars
- Yield Strength: 28,000 psi
- Hardness: Not Rated
- Temper: H116 (1/8 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209, ASTM B928
Highly corrosion resistant, 5083 is largely used around salt water for building ships and oil rigs. It maintains its strength in extreme cold, so it's also used to make cryogenic pressure vessels and tanks.
Impact-Resistant Marine-Grade 5083 Aluminum Sheets
- Yield Strength: 37,000 psi
- Hardness: Not Rated
- Temper: H131
- Specifications Met: AMS 4027, MIL-DTL-46027
Also known as armor plate, these 5083 aluminum sheets are hardened to an H131 temper for increased strength and impact resistance over standard 5083 sheets. They meet MIL-DTL-46027 and are the grade of aluminum used for personnel carriers in military operations. 5083 is highly corrosion resistant and is especially suited for use around salt water. It also maintains its strength in extreme cold and can be used in cryogenic applications.
| Thick. | Thick. Tolerance | Temperature Range, °F | Flatness Tolerance | Each | |
6" × 6" | |||||
|---|---|---|---|---|---|
| 1/2" | -0.023" to 0.023" | -320° to 150° | 0.25" | 00000000 | 000000 |
| 3/4" | -0.031" to 0.031" | -320° to 150° | 0.25" | 00000000 | 00000 |
| 1" | -0.023" to 0.023" | -320° to 150° | 0.25" | 00000000 | 00000 |
6" × 12" | |||||
| 1/2" | -0.023" to 0.023" | -320° to 150° | 0.25" | 00000000 | 00000 |
| 3/4" | -0.031" to 0.031" | -320° to 150° | 0.25" | 00000000 | 00000 |
| 1" | -0.023" to 0.023" | -320° to 150° | 0.25" | 00000000 | 00000 |
12" × 12" | |||||
| 1/2" | -0.023" to 0.023" | -320° to 150° | 0.25" | 00000000 | 00000 |
| 3/4" | -0.031" to 0.031" | -320° to 150° | 0.25" | 00000000 | 000000 |
| 1" | -0.023" to 0.023" | -320° to 150° | 0.25" | 00000000 | 000000 |
High-Strength Marine-Grade 5456 Aluminum
- Yield Strength: 33,000 psi
- Hardness: Brinell 90 (Soft)
- Temper: H116 (1/8 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B928
Stronger than other marine-grade aluminum, 5456 is often used for pressure vessels and storage tanks in saltwater environments.
12" × 12" | 24" × 24" | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | ||
| 1/8" | -0.006" to 0.006" | 0000000 | 000000 | 0000000 | 0000000 |
| 3/16" | -0.011" to 0.011" | 0000000 | 00000 | 0000000 | 000000 |
| 1/4" | -0.014" to 0.014" | 0000000 | 00000 | 0000000 | 000000 |
| 3/8" | -0.017" to 0.017" | 0000000 | 00000 | 0000000 | 000000 |
| 1/2" | -0.023" to 0.023" | 0000000 | 00000 | 0000000 | 000000 |
| 3/4" | -0.031" to 0.031" | 0000000 | 000000 | 0000000 | 000000 |