Material Material |
---|
|
Connection Style Connection Style |
---|
![]() |
Socket Connect |
![]() |
Threaded |
![]() |
Flanged |
For Use With For Use With |
---|
For Pipe Material For Pipe Material |
---|
|
Maximum Pressure Maximum Pressure |
---|
|
Specifications Met Specifications Met |
---|
|
O-Ring Material O-Ring Material |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Length Length |
---|
Interior Interior |
---|
|
Nut Material Nut Material |
---|
|
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat. An internal gripping ring and rubber O-ring create a secure seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. These steel fittings are coated in zinc-nickel to resist corrosion, but will rust if frequently exposed to saltwater or harsh chemicals. They are comparable to Viega MegaPress steel fittings.
Fittings comply with the Uniform Plumbing Code for plumbing systems and the Uniform Mechanical Code for HVAC and refrigeration. They also meet ANSI/ASME B31 code requirements for use in pressure piping systems.
Fittings with an EPDM rubber O-ring are often used for water processing lines, fire sprinklers, and heating and cooling systems. EPDM rubber won’t degrade when exposed to water, ethylene glycol, and propylene glycol. These fittings meet UL 213 and FM 1920 standards for use in fire protection systems.
Buna-N rubber O-rings hold up to natural gas, propane, diesel fuel, lubricants, and other oils. Fittings with these O-rings are often used in fuel gas systems and air lines. They meet the ANSI LC4/CSA 6.32 standard for fuel gas systems and comply with the International Fuel Gas Code.
Connectors with center stop have a small internal ridge that prevents the pipe from sliding too far into the fitting. Insert the pipe on each side of the connection up to the center stop to ensure a tight seal.
Unions separate into three pieces. Unscrew and remove the center nut for quick access to a line.
Bolt two same-size flanges together with a gasket (sold separately) to create a removable connection to valves, pumps and other equipment.
EPDM Rubber O-Ring | Buna-N Rubber O-Ring | |||||
---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Lg. | Each | Each | ||
1/2 | 0.188" | 2 45/64" | 00000000 | 000000 | 00000000 | 000000 |
1/2 | 0.188" | 3 13/16" | 0000000 | 00000 | 00000000 | 00000 |
3/4 | 0.188" | 2 15/16" | 00000000 | 00000 | 00000000 | 00000 |
3/4 | 0.188" | 4" | 00000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 3 19/64" | 000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 4 3/8" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 4 5/16" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 5 21/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 4 5/8" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 5 7/16" | 00000000 | 00000 | 0000000 | 00000 |
2 | 0.375" | 4 45/64" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 5 5/8" | 00000000 | 00000 | 00000000 | 00000 |
EPDM Rubber O-Ring | Buna-N Rubber O-Ring | |||||
---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Lg. | Each | Each | ||
1/2 | 0.188" | 2 45/64" | 00000000 | 000000 | 00000000 | 000000 |
3/4 | 0.188" | 2 15/16" | 00000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 3 17/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 4 11/32" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 4 5/8" | 0000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 4 45/64" | 00000000 | 00000 | 00000000 | 00000 |
EPDM Rubber O-Ring | Buna-N Rubber O-Ring | ||||||
---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Lg. | Each | Lg. | Each | ||
1/2 | 0.188" | 4 1/2" | 00000000 | 000000 | 4 15/32" | 00000000 | 0000000 |
3/4 | 0.188" | 4 63/64" | 00000000 | 00000 | 4 63/64" | 00000000 | 000000 |
1 | 0.188" | 5 11/32" | 0000000 | 000000 | 5 19/64" | 00000000 | 000000 |
1 1/4 | 0.375" | 6 31/64" | 00000000 | 000000 | 6 31/64" | 00000000 | 000000 |
1 1/2 | 0.375" | 6 5/8" | 00000000 | 000000 | 6 41/64" | 00000000 | 000000 |
2 | 0.375" | 7 39/64" | 00000000 | 000000 | 7 11/32" | 00000000 | 000000 |
EPDM Rubber O-Ring | Buna-N Rubber O-Ring | |||||
---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Lg. | Each | Each | ||
NPT Threads | ||||||
1/2 | 0.188" | 2 33/64" | 00000000 | 000000 | 00000000 | 000000 |
3/4 | 0.188" | 2 21/32" | 00000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 3" | 00000000 | 00000 | 0000000 | 00000 |
1 1/4 | 0.375" | 3 41/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 3 51/64" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 3 29/32" | 00000000 | 00000 | 00000000 | 00000 |
EPDM Rubber O-Ring | Buna-N Rubber O-Ring | |||||
---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Lg. | Each | Each | ||
NPT Threads | ||||||
1/2 | 0.188" | 2 19/64" | 00000000 | 000000 | 0000000 | 000000 |
3/4 | 0.188" | 2 29/64" | 00000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 2 47/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 3 3/16" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 3 17/64" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 3 27/64" | 00000000 | 00000 | 00000000 | 00000 |
Bolt Hole | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Class | Lg. | Each | |
EPDM Rubber O-Ring | ||||||||||
1/2 | 0.188" | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 150 | 2 7/16" | 00000000 | 0000000 |
3/4 | 0.188" | 4" | 1/2" | 5/8" | 4 | 2 3/4" | 150 | 2 19/32" | 00000000 | 000000 |
1 | 0.188" | 4 3/8" | 1/2" | 5/8" | 4 | 3 1/8" | 150 | 2 61/64" | 00000000 | 000000 |
1 1/4 | 0.375" | 4 1/2" | 1/2" | 5/8" | 4 | 3 1/2" | 150 | 3 9/16" | 00000000 | 000000 |
1 1/2 | 0.375" | 4 7/8" | 1/2" | 5/8" | 4 | 3 7/8" | 150 | 3 51/64" | 00000000 | 000000 |
2 | 0.375" | 5 7/8" | 5/8" | 3/4" | 4 | 4 3/4" | 150 | 3 29/32" | 00000000 | 000000 |
Buna-N Rubber O-Ring | ||||||||||
1/2 | 0.188" | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 150 | 2 7/16" | 00000000 | 000000 |
3/4 | 0.188" | 4" | 1/2" | 5/8" | 4 | 2 3/4" | 150 | 2 19/32" | 00000000 | 000000 |
1 | 0.188" | 4 3/8" | 1/2" | 5/8" | 4 | 3 1/8" | 150 | 2 61/64" | 0000000 | 000000 |
1 1/4 | 0.375" | 4 1/2" | 1/2" | 5/8" | 4 | 3 1/2" | 150 | 3 9/16" | 00000000 | 000000 |
1 1/2 | 0.375" | 4 7/8" | 1/2" | 5/8" | 4 | 3 7/8" | 150 | 3 51/64" | 00000000 | 000000 |
2 | 0.375" | 5 7/8" | 5/8" | 3/4" | 4 | 4 3/4" | 150 | 3 29/32" | 00000000 | 000000 |
EPDM Rubber O-Ring | Buna-N Rubber O-Ring | ||||||
---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Lg. | Each | Lg. | Each | ||
NPT Threads | |||||||
1/2 | 0.188" | 2 27/32" | 0000000 | 000000 | 2 63/64" | 00000000 | 000000 |
3/4 | 0.188" | 3 13/64" | 00000000 | 00000 | 3 11/32" | 00000000 | 00000 |
1 | 0.188" | 3 3/8" | 00000000 | 000000 | 3 5/8" | 00000000 | 000000 |
1 1/4 | 0.375" | 4 1/32" | 00000000 | 000000 | 4 11/32" | 00000000 | 000000 |
1 1/2 | 0.375" | 4 3/32" | 00000000 | 000000 | 4 11/32" | 0000000 | 000000 |
2 | 0.375" | 5" | 00000000 | 000000 | 4 49/64" | 00000000 | 000000 |
(A) | (B) | EPDM Rubber O-Ring | Buna-N Rubber O-Ring | |||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Pipe Size | Socket Dp. | Lg. | Each | Each | ||
3/4 | 0.188" | 1/2 | 0.188" | 3 7/16" | 00000000 | 000000 | 0000000 | 000000 |
1 | 0.188" | 1/2 | 0.188" | 3 51/64" | 00000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 3/4 | 0.188" | 3 47/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 3/4 | 0.188" | 4 3/8" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1 | 0.188" | 4 25/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1 1/4 | 0.375" | 4 29/64" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 1 1/4 | 0.375" | 5 17/64" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 1 1/2 | 0.375" | 5 17/64" | 00000000 | 00000 | 00000000 | 00000 |
(A) | (B) | EPDM Rubber O-Ring | Buna-N Rubber O-Ring | |||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Pipe Size | Thread Type | Lg. | Each | Each | ||
3/4 | 0.188" | 1/2 | NPT | 2 7/16" | 00000000 | 000000 | 00000000 | 000000 |
1 | 0.188" | 1/2 | NPT | 2 29/32" | 00000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 3/4 | NPT | 2 11/16" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 1/2 | NPT | 3 15/32" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 3/4 | NPT | 3 31/64" | 0000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 1 | NPT | 3 15/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1/2 | NPT | 3 23/32" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 3/4 | NPT | 3 45/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1 | NPT | 3 41/64" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1 1/4 | NPT | 3 13/32" | 00000000 | 00000 | 0000000 | 00000 |
2 | 0.375" | 1/2 | NPT | 4 1/16" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 3/4 | NPT | 4 1/16" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 1 | NPT | 3 63/64" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 1 1/4 | NPT | 3 15/16" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 1 1/2 | NPT | 3 11/16" | 0000000 | 00000 | 00000000 | 00000 |
(A) | (B) | |||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Pipe Size | Socket Dp. | Lg. | Each | |
EPDM Rubber O-Ring | ||||||||
3/4 | 1 3/64" | 0.824" | 0.113" | 1/2 | 0.188" | 2 27/32" | 00000000 | 000000 |
1 | 1 5/16" | 1.049" | 0.133" | 1/2 | 0.188" | 3 13/64" | 00000000 | 00000 |
1 | 1 5/16" | 1.049" | 0.133" | 3/4 | 0.188" | 3 15/64" | 00000000 | 00000 |
1 1/4 | 1 21/32" | 1.38" | 0.14" | 1 | 0.188" | 3 63/64" | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 3/4 | 0.188" | 4 1/8" | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 1 | 0.188" | 4 5/32" | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 1 1/4 | 0.375" | 4 33/64" | 00000000 | 00000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 | 0.188" | 4 31/64" | 00000000 | 00000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 1/4 | 0.375" | 4 53/64" | 0000000 | 00000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 1/2 | 0.375" | 4 53/64" | 00000000 | 00000 |
Buna-N Rubber O-Ring | ||||||||
3/4 | 1 3/64" | 0.824" | 0.113" | 1/2 | 0.188" | 2 27/32" | 00000000 | 00000 |
1 | 1 5/16" | 1.049" | 0.133" | 1/2 | 0.188" | 3 13/64" | 00000000 | 00000 |
1 | 1 5/16" | 1.049" | 0.133" | 3/4 | 0.188" | 3 15/64" | 00000000 | 00000 |
1 1/4 | 1 21/32" | 1.38" | 0.14" | 1 | 0.188" | 3 63/64" | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 3/4 | 0.188" | 4 1/8" | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 1 | 0.188" | 4 5/32" | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 1 1/4 | 0.375" | 4 33/64" | 00000000 | 00000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 | 0.188" | 4 31/64" | 00000000 | 00000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 1/4 | 0.375" | 4 53/64" | 0000000 | 00000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 1/2 | 0.375" | 4 53/64" | 00000000 | 00000 |
EPDM Rubber O-Ring | Buna-N Rubber O-Ring | |||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Socket Dp. | Each | Each | ||
1/2 | 27/32" | 0.622" | 0.109" | 0.188" | 00000000 | 000000 | 00000000 | 000000 |
3/4 | 1 3/64" | 0.824" | 0.113" | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 | 1 5/16" | 1.049" | 0.133" | 0.188" | 00000000 | 00000 | 0000000 | 00000 |
1 1/4 | 1 21/32" | 1.38" | 0.14" | 0.375" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 0.375" | 00000000 | 00000 | 00000000 | 00000 |
2 | 2 3/8" | 2.067" | 0.154" | 0.375" | 00000000 | 00000 | 00000000 | 00000 |
EPDM Rubber O-Ring | Buna-N Rubber O-Ring | |||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Socket Dp. | Each | Each | ||
1/2 | 27/32" | 0.622" | 0.109" | 0.188" | 00000000 | 000000 | 00000000 | 000000 |
3/4 | 1 3/64" | 0.824" | 0.113" | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 | 1 5/16" | 1.049" | 0.133" | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 1 21/32" | 1.38" | 0.14" | 0.375" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 0.375" | 0000000 | 00000 | 00000000 | 00000 |
2 | 2 3/8" | 2.067" | 0.154" | 0.375" | 00000000 | 00000 | 00000000 | 00000 |
Inline tees are also known as branch tees.
(A) | (B) | EPDM Rubber O-Ring | Buna-N Rubber O-Ring | ||||
---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Pipe Size | Socket Dp. | Each | Each | ||
3/4 | 0.188" | 1/2 | 0.188" | 0000000 | 000000 | 00000000 | 000000 |
1 | 0.188" | 1/2 | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 3/4 | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 1/2 | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 3/4 | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 1 | 0.188" | 00000000 | 00000 | 0000000 | 00000 |
1 1/2 | 0.375" | 1/2 | 0.188" | 00000000 | 00000 | 00000000 | 000000 |
1 1/2 | 0.375" | 3/4 | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1 | 0.188" | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1 1/4 | 0.375" | 00000000 | 00000 | 00000000 | 00000 |
2 | 0.375" | 1/2 | 0.188" | 0000000 | 000000 | 00000000 | 000000 |
2 | 0.375" | 3/4 | 0.188" | 00000000 | 000000 | 00000000 | 000000 |
2 | 0.375" | 1 | 0.188" | 00000000 | 000000 | 00000000 | 000000 |
2 | 0.375" | 1 1/4 | 0.375" | 00000000 | 000000 | 00000000 | 000000 |
2 | 0.375" | 1 1/2 | 0.375" | 00000000 | 000000 | 00000000 | 000000 |
Inline tees are also known as branch tees.
(A) | (B) | EPDM Rubber O-Ring | Buna-N Rubber O-Ring | ||||
---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Pipe Size | Thread Type | Each | Each | ||
3/4 | 0.188" | 1/2 | NPT | 000000 | 000000 | 00000000 | 000000 |
1 | 0.188" | 1/2 | NPT | 00000000 | 00000 | 00000000 | 00000 |
1 | 0.188" | 3/4 | NPT | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 1/2 | NPT | 00000000 | 00000 | 0000000 | 00000 |
1 1/4 | 0.375" | 3/4 | NPT | 00000000 | 00000 | 00000000 | 00000 |
1 1/4 | 0.375" | 1 | NPT | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1/2 | NPT | 00000000 | 00000 | 00000000 | 000000 |
1 1/2 | 0.375" | 3/4 | NPT | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1 | NPT | 00000000 | 00000 | 00000000 | 00000 |
1 1/2 | 0.375" | 1 1/4 | NPT | 0000000 | 00000 | 00000000 | 000000 |
2 | 0.375" | 1/2 | NPT | 00000000 | 000000 | 00000000 | 000000 |
2 | 0.375" | 3/4 | NPT | 00000000 | 000000 | 00000000 | 000000 |
2 | 0.375" | 1 | NPT | 00000000 | 000000 | 00000000 | 000000 |
2 | 0.375" | 1 1/4 | NPT | 00000000 | 000000 | 0000000 | 000000 |
2 | 0.375" | 1 1/2 | NPT | 00000000 | 000000 | 00000000 | 000000 |
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
---|---|---|---|---|---|---|---|
Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
18V DC | 1 | 3 | Yes | 39 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |
Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat. Fittings have an internal stainless steel gripping ring and rubber O-ring that create a seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. These fittings are comparable to Viega MegaPress fittings.
Fittings comply with the Uniform Plumbing Code for plumbing systems and the Uniform Mechanical Code for HVAC and refrigeration. They also meet ANSI/ASME B31 code requirements for use in pressure piping systems.
304 stainless steel fittings resist corrosion from frequent exposure to water and fuels. They are often used for water processing lines, heating and cooling systems, and fuel lines.
316 stainless steel fittings stand up to harsh environments with constant exposure to chemical solutions. They meet NSF/ANSI Standard 61 for use with drinking water, and are often found on water and chemical processing lines in corrosive environments.
Connectors with center stop have a small internal ridge that prevents the pipe from sliding too far into the fitting and taking space from the pipe on the other side. Insert the pipe on each side of the connection up to the center stop to ensure a reliable seal.
Union straight connectors separate into three pieces. Unscrew and remove the center nut for quick access to a line.
Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Class | Lg. | Each | |
304 Stainless Steel | ||||||||||
1/2 | 1 1/16" | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 150 | 2 3/16" | 00000000 | 0000000 |
3/4 | 1 3/16" | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 150 | 2 25/64" | 00000000 | 000000 |
1 | 1 3/8" | 4 3/8" | 1/2" | 5/8" | 4 | 3 1/8" | 150 | 2 11/16" | 00000000 | 000000 |
1 1/2 | 1 7/8" | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 150 | 3 23/64" | 00000000 | 000000 |
2 | 2" | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 150 | 3 1/2" | 00000000 | 000000 |
316 Stainless Steel | ||||||||||
1/2 | 1 1/16" | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 150 | 2 3/16" | 00000000 | 000000 |
3/4 | 1 3/16" | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 150 | 2 25/64" | 00000000 | 000000 |
1 | 1 3/8" | 4 3/8" | 1/2" | 5/8" | 4 | 3 1/8" | 150 | 2 11/16" | 00000000 | 000000 |
1 1/2 | 1 7/8" | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 150 | 3 23/64" | 00000000 | 000000 |
2 | 2" | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 150 | 3 1/2" | 00000000 | 000000 |
(A) | (B) | 304 Stainless Steel | 316 Stainless Steel | |||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Pipe Size | Socket Dp. | Lg. | Each | Each | ||
3/4 | 1 3/16" | 1/2 | 1 1/16" | 3 7/16" | 00000000 | 000000 | 00000000 | 0000000 |
1 | 1 3/8" | 3/4 | 1 3/16" | 3 47/64" | 00000000 | 000000 | 00000000 | 000000 |
1 1/2 | 1 7/8" | 1 | 1 3/8" | 4 9/16" | 00000000 | 000000 | 00000000 | 000000 |
2 | 2" | 1 1/2 | 1 7/8" | 5 17/64" | 00000000 | 000000 | 00000000 | 000000 |
(A) | (B) | |||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Pipe Size | Socket Dp. | Lg. | Each | |
304 Stainless Steel | ||||||||
3/4 | 1 3/64" | 0.824" | 0.113" | 1/2 | 1 1/16" | 2 61/64" | 00000000 | 000000 |
1 | 1 5/16" | 1.049" | 0.133" | 1/2 | 1 1/16" | 3 15/64" | 00000000 | 000000 |
1 | 1 5/16" | 1.049" | 0.133" | 3/4 | 1 3/16" | 3 17/64" | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 3/4 | 1 3/16" | 4 5/32" | 00000000 | 000000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 1 | 1 3/8" | 4 11/64" | 00000000 | 000000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 | 1 3/8" | 4 1/2" | 00000000 | 000000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 1/2 | 1 7/8" | 4 53/64" | 00000000 | 000000 |
316 Stainless Steel | ||||||||
3/4 | 1 3/64" | 0.824" | 0.113" | 1/2 | 1 1/16" | 2 61/64" | 00000000 | 00000 |
1 | 1 5/16" | 1.049" | 0.133" | 1/2 | 1 1/16" | 3 15/64" | 00000000 | 000000 |
1 | 1 5/16" | 1.049" | 0.133" | 3/4 | 1 3/16" | 3 17/64" | 00000000 | 000000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 3/4 | 1 3/16" | 4 5/32" | 00000000 | 000000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 1 | 1 3/8" | 4 11/64" | 00000000 | 000000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 | 1 3/8" | 4 1/2" | 00000000 | 000000 |
2 | 2 3/8" | 2.067" | 0.154" | 1 1/2 | 1 7/8" | 4 53/64" | 00000000 | 000000 |
304 Stainless Steel | 316 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Socket Dp. | Each | Each | ||
1/2 | 27/32" | 0.622" | 0.109" | 1 1/16" | 000000 | 000000 | 000000 | 000000 |
3/4 | 1 3/64" | 0.824" | 0.113" | 1 3/16" | 000000 | 00000 | 000000 | 000000 |
1 | 1 5/16" | 1.049" | 0.133" | 1 3/8" | 000000 | 000000 | 000000 | 000000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 1 7/8" | 000000 | 000000 | 000000 | 000000 |
2 | 2 3/8" | 2.067" | 0.154" | 2" | 000000 | 000000 | 0000000 | 000000 |
304 Stainless Steel | 316 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Socket Dp. | Each | Each | ||
1/2 | 27/32" | 0.622" | 0.109" | 1 1/16" | 0000000 | 000000 | 0000000 | 000000 |
3/4 | 1 3/64" | 0.824" | 0.113" | 1 3/16" | 0000000 | 00000 | 0000000 | 000000 |
1 | 1 5/16" | 1.049" | 0.133" | 1 3/8" | 0000000 | 000000 | 0000000 | 000000 |
1 1/2 | 1 29/32" | 1.61" | 0.145" | 1 7/8" | 0000000 | 000000 | 0000000 | 000000 |
2 | 2 3/8" | 2.067" | 0.154" | 2" | 0000000 | 000000 | 0000000 | 000000 |
Inline tees are also known as branch tees.
(A) | (B) | 304 Stainless Steel | 316 Stainless Steel | ||||
---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Pipe Size | Socket Dp. | Each | Each | ||
3/4 | 1 3/16" | 1/2 | 1 1/16" | 0000000 | 0000000 | 0000000 | 0000000 |
1 | 1 3/8" | 1/2 | 1 1/16" | 0000000 | 000000 | 0000000 | 000000 |
1 | 1 3/8" | 3/4 | 1 3/16" | 0000000 | 000000 | 0000000 | 000000 |
1 1/2 | 1 7/8" | 1/2 | 1 1/16" | 0000000 | 000000 | 0000000 | 000000 |
1 1/2 | 1 7/8" | 3/4 | 1 3/16" | 0000000 | 000000 | 0000000 | 000000 |
1 1/2 | 1 7/8" | 1 | 1 3/8" | 0000000 | 000000 | 0000000 | 000000 |
2 | 2" | 1/2 | 1 1/16" | 0000000 | 000000 | 0000000 | 000000 |
2 | 2" | 3/4 | 1 3/16" | 0000000 | 000000 | 0000000 | 000000 |
2 | 2" | 1 | 1 3/8" | 0000000 | 000000 | 0000000 | 000000 |
2 | 2" | 1 1/2 | 1 7/8" | 0000000 | 000000 | 0000000 | 000000 |
Inline tees are also known as branch tees.
(A) | (B) | 304 Stainless Steel | 316 Stainless Steel | ||||
---|---|---|---|---|---|---|---|
Pipe Size | Socket Dp. | Pipe Size | Thread Type | Each | Each | ||
3/4 | 1 3/16" | 1/2 | NPT | 0000000 | 0000000 | 0000000 | 0000000 |
1 | 1 3/8" | 1/2 | NPT | 0000000 | 000000 | 0000000 | 000000 |
1 | 1 3/8" | 3/4 | NPT | 0000000 | 000000 | 0000000 | 000000 |
1 1/2 | 1 7/8" | 1/2 | NPT | 0000000 | 000000 | 0000000 | 000000 |
1 1/2 | 1 7/8" | 3/4 | NPT | 0000000 | 000000 | 0000000 | 000000 |
1 1/2 | 1 7/8" | 1 | NPT | 0000000 | 000000 | 0000000 | 000000 |
2 | 2" | 1/2 | NPT | 0000000 | 000000 | 0000000 | 000000 |
2 | 2" | 3/4 | NPT | 0000000 | 000000 | 0000000 | 000000 |
2 | 2" | 1 | NPT | 0000000 | 000000 | 0000000 | 000000 |
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
---|---|---|---|---|---|---|---|
Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
18V DC | 1 | 3 | Yes | 39 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |
Seal press-connect fittings onto steel and stainless steel pipe without threading or welding. Slide the tubing into a fitting and use these tools to crimp the connection. Compatible with Viega MegaPress fittings.
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
Crimping tools seal the fitting in less than five seconds. The long-lasting battery powers the tool for more than 400 crimps per charge. Lightweight and cordless, you can take these tools to any job. Access your connection from any angle using the pivoting head.