Metal Containers | McMaster-Carr

Replace the lids on your sanitary stainless steel drums. These lids are highly polished to prevent product buildup and bacteria growth, so they’re used to store food, beverage, and pharmaceutical products.

Closing Rings for Sanitary Stainless Steel Drums

Clamp lids onto sanitary stainless steel drums using these leverlock closing rings, which create a tight seal and are easy to put on and take off.

Salvage/Overpack Drums

Use these drums for secondary containment or for temporarily storing and transporting leaking containers.

Galvanized Steel Tubs

Tubs are made of galvanized steel for corrosion resistance.

Cans

Tins

Paint Cans

Safety Cans

Also known as Type I safety cans, these have a single opening for both filling and pouring.

Safety Cans with Faucet

A self-closing faucet provides controlled, one-handed dispensing of liquids.

Safety Cans with Stand

Tip cans down for controlled dispensing, then swing them back to their upright position.

Safety Cans with Built-In Spout

Also known as Type II safety cans, these have two openings—one for filling, one for pouring.

Brush-Top Cans

Fuel Cans

Carry and store petroleum-based liquids in these sturdy cans.

Liquid Nitrogen Cans

Use these cryogenic containers to safely store, transport, and dispense liquid nitrogen. Also known as dewars, their welded, double-aluminum walls are vacuum insulated for maximum thermal protection.

Jars, Bottles, and Jugs

Metal Bottles

Quick-Clamp Stainless Steel Bottles

Fill these air-and liquid-tight bottles directly from your line to store, test, and ship liquids. Connect to a quick-clamp fitting with the included gasket and clamp.

Jugs

Store, pour, and carry up to 1 gallon.

Pitchers

The open top makes these easier to fill than jugs, while the spout gives more control when pouring.

Pans and Trays

Metal Pans

Food Industry Stainless Steel Pans

Super-Corrosion-Resistant Stainless Steel Pans

Made of 316 stainless steel, these pans offer the best resistance to corrosion and pitting.

Aluminum Foil Pans

Drain Pans

A handle and pour spout make it easy to transport and discard contents.

Vented Aluminum Pans

These pans have 1/8” diameter perforations on the sides and bottom to allow drainage and air flow.

Vented Food Industry Stainless Steel Pans

The 1/4” diameter perforations on the sides and bottom allow drainage and air flow through these pans.

Magnetic Trays

Magnetized to hold metal tools and parts, these trays can be used right-side up, sideways, and even upside down.

Steel Compartmented Pans

An aluminized finish makes these pans corrosion resistant.

Storage Boxes and Cases

Steel Tote Baskets

Stainless Steel Tote Baskets

Steel Tote Boxes

Tote Trays

Tote Trays for Pipe Nipples

Storage Boxes

Storage Boxes with Removable Tote Tray

Storage Boxes with Drawers

Storage Boxes with Cantilever Trays

Security Boxes

These boxes are also known as cash boxes.

Protective Storage Cases with Foam

With an impact-resistant shell and foam-padded interior, these cases will protect your equipment for years to come.

Compartmented Boxes with
Handle and Removable Bin Cups

Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.

Metal Beakers

Waste Containers

Metal Waste Containers

Metal Waste Containers with Lift-Off Lid

A galvanized finish protects these waste containers from rust.

Metal Waste Containers with Push Lid

Tabletop Waste Containers

Add these 7" tall waste containers to tables, shelves, and small spaces.

Wall-Mount Waste Containers

Mount these containers to the wall to avoid using valuable floor space.

Decorative Outdoor Waste Containers

Touch-Free Waste Containers

Open these waste containers with a wave of your hand. The motion-activated sensor lifts the lid and lowers it automatically.

Metal Step-Open Waste Containers

Step on the pedal to open these containers.

Safety Containers for Oily Waste

For temporary storage of oil- and solvent-soaked towels and brushes, these containers protect flammable contents from potential fire sources and spontaneous combustion.

Safety Disposal Cans for Flammable
Liquids with Built-In Funnel

Easily fill these cans through the detachable wide-mouth funnel, then remove the threaded plug to empty. A flame arrester protects against outside ignition.

Safety Disposal Cans for Flammable Liquids

The spring-loaded, self-closing cap on these cans automatically vents to relieve excess vapor pressure, and a flame arrester protects against outside ignition.

Cigarette Waste Containers

Dual-Compartment Waste and Recycling Containers

Save space and time with these containers that keep waste and recycling separate in a single bin.

Decorative Outdoor Dual-Compartment
Waste and Recycling Containers

Made of durable steel, these dual-compartment containers resist sunlight, ozone, and water.

Metal Recycling Containers

Recycling labels make it clear these containers are not for waste.

Dual Compartment Step-Open
Waste and Recycling Containers

Dispose of waste and recycling in a single container, while still keeping them separate—these containers open hands-free with their foot pedal and close softly.

Tanks

Pressurized Liquid Dispensing Tanks

Attach a compressed air source to pressurize liquids for dispensing and spraying.

Sanitary Pressurized Liquid Dispensing Tanks

Store and dispense liquids in food, pharmaceutical, and beverage plants—these tanks attach to a compressed air source for use in sanitary environments.

Double-Wall Steel Tanks with Forklift Entry

Tanks provide extra protection for products that require double-wall containment, such as diesel and waste oil, solvents, and antifreeze.

Stainless Steel Easy-Drain Tanks

The bottom of these tanks is sloped to ensure easy and complete drainage.

Steel Tanks with Forklift Entry

These tanks are typically used for storing fuel and waste oil.

Sanitary Easy-Drain Tanks

Store and transport liquids in bulk in sanitary environments such as food and pharmaceutical plants.

Elevated Steel Tanks

A lifting lug on top makes these tanks easy to transport.

Pails

Steel Pails

Steel Pails with Flame Arrester

Mix and store noncorrosive flammable liquids, such as paints and lacquers.

Stainless Steel Pails

Food Industry Stainless Steel Pails

These 300 series stainless steel pails meet NSF/ANSI standards and are commonly used in food-processing applications.

Bin Boxes

Stainless Steel Bin Boxes

Drawer-Style Steel Bin Boxes

Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A high front and back prevents spills.

Gravity-Feed Bin Boxes

The sloped bottom of the picking bin allows parts to flow forward while the shallow-angle lip makes them easily accessible.

Wire Bin Boxes

Unlike other bin boxes, wire bin boxes are easy to clean and don't collect dust.

Large-Capacity Containers

Collapsible Large-Capacity Containers

Collapse and stack containers when not in use to save valuable storage space.

Mobile Collapsible Large-Capacity Containers

Easily move these large containers where they're needed, then collapse and stack them to save valuable storage space.

Vacuum Containers

Also known as vacuum degassing chambers, these containers remove trapped air from mixtures such as paint and mold resins.

Spill-Control Trays

Catch 3 to 30 gallons of spills and drips.

Enclosures

Aluminum Corrosion-Resistant Washdown Enclosures

Aluminum enclosures are a lightweight yet durable alternative to stainless steel.

Heavy Duty Aluminum Corrosion-Resistant
Washdown Enclosures

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

Sanitary Stainless Steel Washdown Enclosures

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.

Stainless Steel Corrosion-Resistant
Washdown Enclosures

Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.

Stainless Steel Tamper- and
Corrosion-Resistant Washdown Enclosures

Sanitary Push-Button Stainless
Steel Washdown Enclosures

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.

Stainless Steel Push-Button
Corrosion-Resistant Washdown Enclosures

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Sanitary Push-Button Flush-Mount
Stainless Steel Washdown Enclosures

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Sanitary Push-Button Shrouded
Stainless Steel Washdown Enclosures

Build-Your-Own Circuit Board Enclosure Bodies

Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.

Circuit Board Enclosures

These enclosures have internal slots to hold circuit boards in place.

Heat-Dissipating Circuit Board Enclosures

With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.

Indoor Enclosures

House electrical components in these general purpose enclosures.

Washdown Enclosures

These enclosures are rated NEMA 4 for protection from dirt and washdowns.

Tamper-Resistant Washdown Enclosures

Control access to these enclosures with a key-operated lock.

Push-Button Washdown Enclosures

No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.

Washdown Enclosures with See-Through Cover

Inspect components without opening the cover.

Pendant Push-Button Washdown Enclosures

With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.

Aluminum Submersible Enclosures

Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.

Machine-Mount Aluminum Submersible Enclosures

Attach these enclosures to machine control panels or walls to guard electronics within the enclosures from water in wet and washdown areas. You can mount them without removing the cover and exposing electronics, such as sensors, switches, and circuit boards, to the environment.

Oil-Resistant Enclosures

These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.

Push-Button Slant-Top Oil-Resistant Enclosures

Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.

Push-Button Oil-Resistant Enclosures

Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.

Slant-Top Oil-Resistant Enclosures

Stainless Steel Weather-Resistant Enclosures

With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.

Aluminum Weather-Resistant Enclosures

Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.

Weather-Resistant Enclosures

Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.

Weather-Resistant Enclosures with Cooling Fans

Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.

Horizontal-Mount Weather-Resistant Enclosures

Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.

Push-Button Hazardous Location Enclosures

These enclosures are designed for use in various hazardous location environments. Protect internal electronics from solid particulates like dust and from spraying or splashing water. All of these enclosures have standard push-button holes, so you don’t need to measure and cut the holes yourself.

Hazardous Location Enclosures

For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.

Oil-Resistant Extra-Large Enclosures

Rated NEMA 12 for protection from dirt and oil/coolant dripping.

Washdown Extra-Large Enclosures

These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.

Flat-Panel Monitor Enclosures

Protect monitors and televisions from environmental damage with these enclosures.

Electronics Cabinets

Shelves for Electronics Cabinets

Mount these shelves in standard electronics cabinets that are 19 in. wide to hold components that cannot fit directly to the enclosure.

Electronics Cabinets

House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.

Heavy Duty Electronics Cabinets

These cabinets accommodate up to 3,200 lbs. of equipment and have larger interiors than standard electronics cabinets.

Enclosed Trough Raceway

Oil-Tight Enclosed Trough Raceway

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.

Weather-Resistant Enclosed Trough Raceway

With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.

Parts Washing

Parts Washing Cans

Parts Washing Cans with Removable Basket

Easily insert and remove parts from these cans.

Easy-Drain Parts Washing Cans

Push down on the spring-loaded drain plate to submerge and agitate to clean parts.

Parts Washers for Solvent-Based Solutions

Low-Fume Parts Washers for Solvent-Based Solutions

The cleaning solution is stored inside a drum to reduce fumes and solvent evaporation.

Mobile Parts Washers for Solvent-Based Solutions

Wheel these washers on casters where you need them.

Bench-Top Parts Washers for Solvent-Based Solutions

Sized for a benchtop, these washers are good for cleaning small parts.

Baskets for Parts Washing Tubs

Parts Washing Tubs

Programmable Heated Ultrasonic Cleaners

Precisely control the cleaning process by setting the temperature and time.

Heated Ultrasonic Cleaners

Economy Ultrasonic Cleaners

Ultrasonic Cleaners

Open-Top Parts Baskets

Made-to-Order Stainless Steel
Rectangular Parts Baskets

Create a basket to meet your exact size specifications.

Stainless Steel Rectangular Parts Baskets

Steel Rectangular Parts Baskets

More economical than stainless steel, choose these baskets when corrosion is not a concern.

Made-to-Order Stainless Steel Round Parts Baskets

Create a basket to meet your exact size specifications.

Stainless Steel Round Parts Baskets

Steel Round Parts Baskets

Enclosed Parts Baskets

Round Enclosed Parts Baskets

Steel Rectangular Enclosed Parts Baskets

More economical than stainless steel, choose these baskets when corrosion is not a concern.

Extra-Rigid Stainless Steel
Rectangular Enclosed Parts Baskets

Made from sheet metal with stamped holes, these baskets are more rigid than wire mesh.

Stainless Steel Rectangular Enclosed Parts Baskets

Baskets are wire mesh.

Heating and Curing

Electric Melting Pots

Melt coatings, adhesive, wax, tar, and alloys with low melting points.

Easy-Pour Electric Melting Pots

Place a mold under the raised pot and open the drain to fill.

Electric Solder Melting Pots

Use for tinning, stripping, and dip soldering.

High-Temperature Graphite Melting Pots

These pots withstand temperatures up to 2500° F to melt metal such as cast iron, copper, and gold.

Heat-Treating Foil Bags

Seal small parts inside these bags for uniform heat treating.

Material Handling

UN-Compliant Shipping Pails with Tab-Lock Lids

These pails come matched with UN-specified lids.

UN-Compliant Shipping Pails for Tab-Lock Lids

Add a lid to safely ship with these pails.

Round UN-Compliant Shipping Jugs

Also known as closed-head pails, these round jugs have a small top opening. They safely ship hazardous liquids.

Steel Box Trucks with Solid Panel Walls

These trucks have solid side panels to prevent small items from falling out. They are made from heavy gauge all-welded steel for strength and durability.

Steel Box Trucks with Mesh Panel Walls

Mesh side panels maximize air circulation and visibility of contents. The all-welded steel construction delivers strength and durability.

Sanitary Stainless Steel Box Trucks

Use these trucks to store, move, or dump ingredients or other items in sanitary environments, such as food processing plants.

Strong-Wall Hoppers

These hoppers have thicker walls than standard hoppers for more strength. Use a forklift to move these perfectly balanced hoppers, then release the locking latch to dump the load. They automatically return to an upright, locked position.

Extra-Durable Hoppers

Built to withstand the heaviest use, these hoppers have thick walls and a 40% thicker frame than other hoppers. Use a forklift to move these perfectly balanced hoppers, then release the locking latch to dump the load. They automatically return to an upright, locked position.

Hoppers

Use a forklift to move these perfectly balanced hoppers, then release the locking latch to dump the load. They automatically return to an upright, locked position.

Lids for Hoppers

Conceal or protect loads in hoppers.

Mobile Hoppers

Wheel these hoppers around or transport with a forklift. Release the locking latch to dump the load.

Strong-Wall Mobile Hoppers

These hoppers have thicker walls than standard hoppers for more strength. Wheel them around or transport with a forklift. Release the locking latch and these perfectly balanced hoppers dump their load then automatically return to an upright, locked position.

Extra-Durable Mobile Hoppers

Built to withstand the heaviest use, these hoppers have thick walls and a 40% thicker frame than other hoppers. Wheel them around or transport with a forklift. Release the locking latch and these perfectly balanced hoppers dump their load then automatically return to an upright, locked position.

Hook-Mount Hoppers

Hoist these hoppers to move, then open the trapdoor on the bottom to empty.

Propane Tanks for Lift Trucks

Replace the propane tank on vehicles. Tanks come unfilled.

Electric-, Air-, and Hydraulic-Powered Motion Control

ASME-Code Compressed Air Storage Tanks

These tanks have drain ports on the bottom to remove condensation.

High-Pressure ASME-Code
Compressed Air Storage Tanks

Able to withstand pressures up to 600 psi, these tanks store compressed air for use in high-pressure applications.

Portable Compressed Air Storage Tanks

Lightweight Compressed Air Storage Tanks

Portable Compressed Air
Storage Tanks with Filter/Dryer

Get clean, dry air wherever you need it. The separator, filter, and dryer mounted on these tanks clean and dry compressed air as you fill it. Once full, move the tank to your workspace on its pneumatic wheels.

Hydraulic Tanks

Store fluids for a hydraulic power unit or circulating-oil system.

Cabinets and Lockers

Chests

Side-Opening Mountable Chests

The door is rimmed with a gasket to keep out moisture and dust. These chests are often mounted to the underbed of a truck.

Floor-Mount Chests

These chests have floor-mounting baseplates so they can be locked in place or detached for portability.

Heavy Duty Ventilated Chests

Mesh construction provides visibility and air circulation. The hinged lid and drop-front gate allow quick access to large equipment.

Heavy Duty Chests

Also known as job boxes, these chests secure equipment and supplies on-site.

Heavy Duty Chests with Shelves

Organize equipment and supplies in these chests, also known as job boxes.

Aluminum Chests

These chests are lightweight and corrosion resistant.

Safes

Heavy Duty Ventilated Outdoor Shelf Cabinets

Mesh sides on this cabinet allow air circulation and visibility.

Heavy Duty Outdoor Shelf Cabinets

These cabinets are scratch and corrosion resistant for extra durability outdoors.

Fire- and Water-Resistant Safes

These safes meet UL Class 350 requirements to maintain an interior temperature of 350° F or less after being subjected to 1700° F for two hours.

Heavy Duty Drawer Cabinets

Use cabinets individually or stacked.

Tabletop Drawer Cabinets

Use cabinets individually or stacked on top of compatible bench-height drawer cabinets.

Bench-Height Drawer Cabinets

Heavy Duty Drawer Cabinets
with Compartmented Drawers

Use cabinets individually, stacked, or connect side-by-side.

Stainless Steel Bench-Height Cabinets

Protect against corrosion with these stainless steel cabinets.

Bench-Height Drawer Cabinets with Stackable Cabinet

Remove the stackable cabinet and carry only the tools you need.

Stainless Steel Tabletop Drawer Cabinets

Store tools or other small items in these cabinets that won’t rust in wet environments.

Heavy Duty Bench-Height Drawer Cabinets

Keep your heaviest tools and parts in a single cabinet, or stack them for more storage.

Heavy Duty Bench-Height Drawer
Cabinets with Compartmented Drawers

Store your heaviest tools and parts. Use cabinets individually, stacked, or connect side-by-side.

Welding, Brazing, and Soldering

Empty Acetylene Tanks

Safely transport and store acetylene in these tanks.

Empty High-Pressure Oxygen Tanks

Safely transport and store oxygen in these tanks.

Empty High-Pressure Inert Gas Tanks

Store argon, argon/carbon dioxide blends, helium, and nitrogen.

Empty Propane Tanks

Safely transport and store propane gas in these tanks.

Filled Butane Canisters

Butane burns cleaner than propane at similar temperatures. Use it in heating, thawing, and soldering applications.

Filled Propylene Cylinders

Propylene produces the highest flame temperature and is better than propane for brazing applications.

Filled Propane Cylinders

Use propane in heating, thawing, and soldering applications.

Filled Oxygen Cylinders

Use oxygen with other fuels to increase flame temperature.

Food Service Equipment

Water Bottles

Water bottles have a flip-up lid for convenient use.

Beverage Dispensers

Often used in break rooms and cafeterias, these dispensers make it easy to serve beverages to a few people or a crowd.

Mugs

Carry coffee, tea, and other hot or cold drinks with you around the workplace.

Fry and Sauce Pans

Made of aluminum, these pans are lightweight yet durable.

Dispensers, Samplers, and Scoops

Mobile Fuel Dispensers

Push-Top Dispensers

Moisten swabs and wipes by pushing down on the top.

Push-Top Dispensers for Flammable Liquids

Dispense flammable liquids with these FM-approved push-top dispensers.

Metal Ladles

Skimmers

Mobile Hand-Pump Sprayers

Air-Atomizing Sprayers

Spray thin liquids evenly without propellant. Fill the sprayer and pressurize with compressed air.

Metal Hand-Pump Sprayers

Pressurized Tanks for Air-Powered Paint Sprayers

Attach a large-capacity tank to your paint sprayer for high-volume application of paint and coatings.

ASME-Code Pressurized Tanks
for Air-Powered Paint Sprayers

These tanks are built to ASME specifications. Use them with your paint sprayer for high-volume application of paint and coatings.

Pressure and Vacuum Control

Expansion Tanks for Water

Use these tanks to accommodate the expansion of heated water and provide a cushion of compressed air in closed water-heating systems.

ASME-Code Expansion Tanks for Water

Manufactured in accordance with ASME codes.

Expansion Tanks for Lubricants

A rolling rubber diaphragm maintains tank pressure at or near 0 psi, which extends seal life to help keep lubricants clean.

Expansion Tanks for Drinking Water

These tanks meet NSF/ANSI Standard 61 for use with drinking (potable) water.

Pressure-Rated Water Tanks

These tanks can be used as water heaters when used with a heat source, such as an immersion heater.

Lubricant Dispensers

Hand-Held Oil Dispensers

Easy-Fill Hand-Held Oil Dispensers

These dispensers have an opening for filling without removing the nozzle.

Mist Coolant Dispensers with Reservoir

These dispensers have a reservoir and controls for coolant flow.

Flood Coolant Dispensers with Reservoir

These dispensers have a reservoir for recirculating coolant.

Pass-Through Cabinets and Windows

Pass-Through Cabinets

Mount these cabinets in a wall to pass samples, supplies, and other materials between rooms while maintaining privacy and minimizing person-to-person contact. They’re common in sanitary environments such as labs.

Pass-Through Cabinets for Clean Rooms

Protect your clean room from contaminants by moving parts, materials, and equipment in and out through these cabinets. They limit the number of people entering the clean room, which helps you comply with pharmaceutical, semiconductor, food-processing, vehicle, and air and spacecraft industry standards.

Revolving Bins

Revolving Bin-Box Racks

Pull out the bin boxes for easy access to contents.

Revolving Bins

Store multiple tools and parts in these bins, which spin so you can easily access the item you need.

Drill Bit Cases

Store and organize drill bits so they stay in good working condition and don't go missing.

3D Printer Air Filtering and Conditioning Enclosures

Protect the health of nearby workers and maintain ideal operating conditions for your 3D printer. To keep your workspace's air clean, these enclosures filter harmful fumes, VOCs, and ultrafine particles that are common when working with filaments such as ABS and nylon.

ANSI-Compliant Portable Eye Wash Stations

ANSI-Compliant Freeze-Resistant
Portable Eye Wash Stations

Plug this station in and the thermostat keeps water at a comfortable temperature in environments as cold as -20° F.

ANSI-Compliant Portable Eye Wash Stations

For jobs that require mobility, this station delivers a continuous flow of water without plumbing.

Refrigerant Storage Cylinders

Enclosure-Mounted Terminal Blocks

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Pegboard Baskets

Store tools large and small while keeping them visible.

Janitorial and Cleaning

Mop Buckets

Dispensers for Wipes

Help people disinfect hands, clean equipment, and sanitize surfaces such as shopping cart handles in order to reduce the spread of illness.

Batch Cans

Food Industry Round Metal Batch Cans

Round Stainless Steel Batch Cans

Round Stainless Steel Batch Cans with Faucet

Narrow-Mouth Round Stainless Steel Batch Cans

Rectangular Stainless Steel Batch Cans

Drums

Steel Drums

Closing Rings for Steel and Stainless Steel Drums

Lids for Steel Drums

Lid Seals for Steel and Stainless Steel Drums

Corrosion-Resistant Steel Drums

Steel Drums with Drain

Lids for Stainless Steel Drums

Stainless Steel Drums

Food Industry Stainless Steel Drums

Sanitary Stainless Steel Drums

Food Industry Lid Seals forSanitary Stainless Steel Drums

Lids for Sanitary Stainless Steel Drums

Closing Rings for Sanitary Stainless Steel Drums

Salvage/Overpack Drums

Galvanized Steel Tubs

Galvanized Steel Tubs

Cans

Tins

Paint Cans

Safety Cans

Safety Cans with Faucet

Safety Cans with Stand

Safety Cans with Built-In Spout

Brush-Top Cans

Fuel Cans

Liquid Nitrogen Cans

Jars, Bottles, and Jugs

Metal Bottles

Quick-Clamp Stainless Steel Bottles

Jugs

Pitchers

Pans and Trays

Metal Pans

Food Industry Stainless Steel Pans

Super-Corrosion-Resistant Stainless Steel Pans

Aluminum Foil Pans

Drain Pans

Vented Aluminum Pans

Vented Food Industry Stainless Steel Pans

Magnetic Trays

Steel Compartmented Pans

Storage Boxes and Cases

Steel Tote Baskets

Stainless Steel Tote Baskets

Steel Tote Boxes

Tote Trays

Tote Trays for Pipe Nipples

Storage Boxes

Storage Boxes with Removable Tote Tray

Storage Boxes with Drawers

Storage Boxes with Cantilever Trays

Security Boxes

Protective Storage Cases with Foam

Compartmented Boxes withHandle and Removable Bin Cups

Metal Beakers

Metal Beakers

Waste Containers

Metal Waste Containers

Metal Waste Containers with Lift-Off Lid

Metal Waste Containers with Push Lid

Tabletop Waste Containers

Wall-Mount Waste Containers

Decorative Outdoor Waste Containers

Touch-Free Waste Containers

Metal Step-Open Waste Containers

Safety Containers for Oily Waste

Safety Disposal Cans for FlammableLiquids with Built-In Funnel

Safety Disposal Cans for Flammable Liquids

Cigarette Waste Containers

Dual-Compartment Waste and Recycling Containers

Decorative Outdoor Dual-CompartmentWaste and Recycling Containers

Metal Recycling Containers

Dual Compartment Step-OpenWaste and Recycling Containers

Food Industry Lid Seals for
Sanitary Stainless Steel Drums

Compartmented Boxes with
Handle and Removable Bin Cups

Safety Disposal Cans for Flammable
Liquids with Built-In Funnel

Decorative Outdoor Dual-Compartment
Waste and Recycling Containers

Dual Compartment Step-Open
Waste and Recycling Containers

Heavy Duty Aluminum Corrosion-Resistant
Washdown Enclosures

Stainless Steel Corrosion-Resistant
Washdown Enclosures

Stainless Steel Tamper- and
Corrosion-Resistant Washdown Enclosures

Sanitary Push-Button Stainless
Steel Washdown Enclosures

Stainless Steel Push-Button
Corrosion-Resistant Washdown Enclosures

Sanitary Push-Button Flush-Mount
Stainless Steel Washdown Enclosures

Sanitary Push-Button Shrouded
Stainless Steel Washdown Enclosures