Create continuous runs of channel without corners.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

This welded, one-piece strut channel combines two strut channels side-to-side.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

When there's no access to the open side of a strut channel, slip one of these nuts through a slotted hole and turn it 90° to secure it in the channel.

Connect two channels to create a stacked channel.

Serrated grooves grip the lip of the channel.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Notches on these washers grip the channel to keep them in place.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Brackets mount on the outside of strut channel to allow trolley movement.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.