McMaster-Carr logo
    Filter by
    For Rigid Conduit Trade Size
    Industrial Info Snippet
    For EMT Conduit Trade Size
    Industrial Info Compare
    Screw Material
    For IMC Conduit Trade Size
    Industrial Info Compare
    Mounting Location
    Mounting Position
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Channel Height
    Attribute Image
    Clamp Type
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    418 Products

    Strut Channel Type

    Strut Channel Type

    Strut Channel Routing Clamps

    Image of ProductInUse. Clamp Shown Installed. Front orientation. Strut Channel Framing and Fittings. Strut Channel Routing Clamps.
    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Routing Clamps, Style 1.
    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Routing Clamps, Style 2.

    Clamp Shown Installed

    Style 1

    Style 2

    Run pipe, conduit, and tubing through your facility by attaching it to strut channel. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed. Just slide clamps into the end of channel and tighten the screw.
    Style 2—The screw is angled for easy access with a screwdriver or drill where pipe, conduit, and tubing run in parallel.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    Copper-Plated Steel—Shield copper pipe and tubing from galvanic corrosion that other metal routing clamps can cause. These also prevent scratches to pipe and resist rust in wet environments.
    304 Stainless Steel—The choice for wet and outdoor environments, these resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    PVC-Coated Steel—With a layer of PVC, these won't wear or cut into PVC-coated conduit and tubing. This keeps the coating intact to prevent rust and extend the life of conduit in high-vibration environments.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Style 1
     
    Zinc-Plated Steel
    1/4"6—1 5/8"3/8"1 1/4"1 11/16"1/16"400—0000000000000
    3/8"10—1 5/8"1/2"1 1/4"1 13/16"1/16"400—000000000000
    1/2"131/8
    		1 5/8"5/8"1 1/4"1 15/16"1/16"400—000000000000
    9/16"141/4
    		1 5/8"11/16"1 1/4"2"1/16"400—000000000000
    5/8"153/8
    		1 5/8"3/4"1 1/4"2 1/16"1/16"400—00000000000
    5/8"161/2
    		1 5/8"3/4"1 1/4"2 3/16"1/16"400—00000000000
    3/4"193/8
    		1 5/8"7/8"1 1/4"2 1/4"1/16"400—000000000000
    13/16"211/2
    		1 5/8"15/16"1 1/4"2 1/4"1/16"400—00000000000
    7/8"221/2
    		1 5/8"1"1 1/4"2 5/16"1/16"400—000000000000
    15/16"243/4
    		1 5/8"1 1/16"1 1/4"2 7/16"5/64"600—00000000000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"600—00000000000
    1 1/8"293/4
    		1 5/8"1 1/4"1 1/4"2 5/8"5/64"600—000000000000
    1 3/16"301
    		1 5/8"1 5/16"1 1/4"2 11/16"5/64"600—00000000000
    1 5/16"331
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—00000000000
    1 3/8"351
    		1 5/8"1 1/2"1 1/4"2 7/8"5/64"600—000000000000
    1 7/16"371 1/4
    		1 5/8"1 9/16"1 1/4"3 1/16"5/64"600—00000000000
    1 5/8"411 1/4
    		1 5/8"1 3/4"1 1/4"3 1/8"5/64"600—000000000000
    1 5/8"411 1/4
    		1 5/8"1 13/16"1 1/4"3 1/4"5/64"600—00000000000
    1 11/16"431 1/2
    		1 5/8"1 7/8"1 1/4"3 5/16"7/64"800—00000000000
    1 7/8"481 1/2
    		1 5/8"2 1/16"1 1/4"3 1/2"7/64"800—00000000000
    2 1/8"54—1 5/8"2 5/16"1 1/4"3 5/8"7/64"800—000000000000
    2 3/16"562
    		1 5/8"2 3/8"1 1/4"3 3/4"7/64"800—00000000000
    2 3/8"602
    		1 5/8"2 9/16"1 1/4"4"7/64"800—00000000000
    2 5/8"67—1 5/8"2 13/16"1 1/4"4"7/64"800—000000000000
    2 7/8"732 1/2
    		1 5/8"3 1/16"1 1/4"4 9/16"7/64"800—00000000000
    3 1/8"79—1 5/8"3 5/16"1 1/4"4 7/16"7/64"800—000000000000
    3 1/2"893
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—00000000000
    3 5/8"923
    		1 5/8"3 7/8"1 1/4"5 1/8"1/8"1,000—000000000000
    4"1023 1/2
    		1 5/8"4 1/4"1 1/4"5 3/4"1/8"1,000—00000000000
    4 1/8"1053 1/2
    		1 5/8"4 3/8"1 1/4"5 11/16"1/8"1,000—000000000000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—00000000000
    5"127—1 5/8"5 1/4"1 1/4"6 3/4"1/8"1,000—000000000000
    5 9/16"1415
    		1 5/8"5 13/16"1 1/4"7 3/4"1/8"1,000—00000000000
    6 1/8"155—1 5/8"6 3/8"1 1/4"8 3/8"9/64"1,000—000000000000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"1/8"1,000—000000000000
    7 5/8"19371 5/8"7 7/8"1 1/4"9 3/8"9/64"1,000—0000000000000
    8 1/8"206—1 5/8"8 3/8"1 1/4"9 7/8"9/64"1,000—0000000000000
    8 5/8"2198
    		1 5/8"8 7/8"1 1/4"10 3/8"1/8"1,000—000000000000
    10 3/4"27310
    		1 5/8"11"1 1/4"13"1/8"1,000—000000000000
    12 3/4"32412
    		1 5/8"13"1 1/4"15"1/8"1,000—0000000000000
    13"330—1 5/8"13 1/4"1 1/4"16"9/64"1,000—0000000000000
    14"356141 5/8"14 1/4"1 1/4"17"9/64"1,000—0000000000000
    15"381—1 5/8"15 1/4"1 1/4"18"9/64"1,000—0000000000000
    16"406161 5/8"16 1/4"1 1/4"19"9/64"1,000—0000000000000
    17"431—1 5/8"17 1/4"1 1/4"20"9/64"1,000—0000000000000
    18"457181 5/8"18 1/4"1 1/4"21"9/64"1,000—0000000000000
    19"482—1 5/8"19 1/4"1 1/4"22"9/64"1,000—0000000000000
    20"508201 5/8"20 1/4"1 1/4"23"9/64"1,000—0000000000000
     
    Copper-Plated Steel
    1/4"6—1 5/8"3/8"1 1/4"1 11/16"1/16"400—000000000000
    3/8"10—1 5/8"1/2"1 1/4"1 13/16"1/16"400—000000000000
    1/2"131/8
    		1 5/8"5/8"1 1/4"1 15/16"1/16"400—00000000000
    5/8"163/8
    		1 5/8"3/4"1 1/4"2 1/16"1/16"400—00000000000
    3/4"193/8
    		1 5/8"7/8"1 1/4"2 1/4"1/16"400—000000000000
    7/8"221/2
    		1 5/8"1"1 1/4"2 5/16"1/16"400—00000000000
    1 1/8"293/4
    		1 5/8"1 1/4"1 1/4"2 5/8"5/64"600—00000000000
    1 3/8"351
    		1 5/8"1 1/2"1 1/4"2 7/8"5/64"600—00000000000
    1 5/8"411 1/4
    		1 5/8"1 3/4"1 1/4"3 1/8"5/64"600—00000000000
    1 11/16"421 1/4
    		1 5/8"1 13/16"1 1/4"3 3/16"5/64"600—000000000000
    1 7/8"471 1/2
    		1 5/8"2 1/16"1 1/4"3 1/2"7/64"800—000000000000
    2 1/8"54—1 5/8"2 5/16"1 1/4"3 9/16"7/64"800—00000000000
    2 3/8"602
    		1 5/8"2 9/16"1 1/4"4"7/64"800—000000000000
    2 5/8"67—1 5/8"2 13/16"1 1/4"4 3/16"7/64"800—00000000000
    2 7/8"732 1/2
    		1 5/8"3 1/16"1 1/4"4 9/16"7/64"800—000000000000
    3 1/8"79—1 5/8"3 5/16"1 1/4"4 11/16"7/64"800—00000000000
    3 1/2"883
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—000000000000
    3 5/8"923
    		1 5/8"3 7/8"1 1/4"5 1/4"1/8"1,000—00000000000
    4 1/8"1053 1/2
    		1 5/8"4 3/8"1 1/4"5 3/4"1/8"1,000—00000000000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—000000000000
    5"127—1 5/8"5 1/4"1 1/4"6 3/4"1/8"1,000—000000000000
    5 1/8"130—1 5/8"5 3/8"1 1/4"6 13/16"1/8"1,000—0000000000000
    5 9/16"1415
    		1 5/8"5 13/16"1 1/4"7 3/4"1/8"1,000—0000000000000
    6 1/8"155—1 5/8"6 3/8"1 1/4"8 3/8"9/64"1,000—0000000000000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"9/64"1,000—0000000000000
    7 5/8"19371 5/8"7 7/8"1 1/4"9 3/8"9/64"1,000—0000000000000
    8 1/8"206—1 5/8"8 3/8"1 1/4"9 7/8"9/64"1,000—0000000000000
     
    304 Stainless Steel
    1/4"6—1 5/8"3/8"1 1/4"1 11/16"1/16"400—000000000000
    3/8"9—1 5/8"1/2"1 1/4"1 13/16"1/16"400—000000000000
    1/2"121/4
    		1 5/8"11/16"1 1/4"1 15/16"1/16"400—000000000000
    9/16"141/4
    		1 5/8"11/16"1 1/4"2"1/16"400—000000000000
    5/8"153/8
    		1 5/8"3/4"1 1/4"2 1/16"1/16"400—00000000000
    11/16"173/8
    		1 5/8"13/16"1 1/4"2 3/16"1/16"400—000000000000
    13/16"211/2
    		1 5/8"15/16"1 1/4"2 1/4"1/16"400—00000000000
    7/8"221/2
    		1 5/8"1 1/16"1 1/4"2 5/16"1/16"400—000000000000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"400—000000000000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"600—00000000000
    1 1/8"283/4
    		1 5/8"1 5/16"1 1/4"2 5/8"5/64"600—000000000000
    1 1/4"311
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—000000000000
    1 5/16"331
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—00000000000
    1 1/2"38—1 5/8"1 11/16"1 1/4"3 1/16"5/64"600—000000000000
    1 5/8"411 1/4
    		1 5/8"1 13/16"1 1/4"3 1/4"5/64"600—00000000000
    1 11/16"421 1/4
    		1 5/8"1 15/16"1 1/4"3 5/16"7/64"800—0000000000000
    1 7/8"481 1/2
    		1 5/8"2 1/16"1 1/4"3 1/2"7/64"800—000000000000
    2 3/16"552
    		1 5/8"2 7/16"1 1/4"3 3/4"7/64"800—0000000000000
    2 5/16"582
    		1 5/8"2 9/16"1 1/4"4"7/64"800—0000000000000
    2 3/8"602
    		1 5/8"2 9/16"1 1/4"4"7/64"800—000000000000
    2 5/8"66—1 5/8"2 13/16"1 1/4"4 5/16"7/64"800—0000000000000
    2 7/8"732 1/2
    		1 5/8"3 1/16"1 1/4"4 9/16"7/64"800—000000000000
    3 1/8"79—1 5/8"3 5/16"1 1/4"5 1/16"7/64"800—0000000000000
    3 1/2"893
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—000000000000
    3 5/8"923
    		1 5/8"3 7/8"1 1/4"5 5/16"1/8"1,000—0000000000000
    3 7/8"983 1/2
    		1 5/8"4 3/16"1 1/4"5 3/4"1/8"1,000—0000000000000
    4"1023 1/2
    		1 5/8"4 1/4"1 1/4"5 3/4"1/8"1,000—000000000000
    4 1/8"1043 1/2
    		1 5/8"4 3/8"1 1/4"5 7/8"1/8"1,000—0000000000000
    4 7/16"112—1 5/8"4 11/16"1 1/4"6 1/4"1/8"1,000—0000000000000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—000000000000
    5"127—1 5/8"5 1/4"1 1/4"6 3/4"1/8"1,000—0000000000000
    5 9/16"1415
    		1 5/8"5 13/16"1 1/4"7 3/4"1/8"1,000—000000000000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"1/8"1,000—000000000000
    7 5/8"19371 5/8"7 7/8"1 1/4"9 3/8"9/64"1,000—0000000000000
    8 5/8"2198
    		1 5/8"8 7/8"1 1/4"10 3/8"1/8"1,000—000000000000
    10 3/4"27310
    		1 5/8"11"1 1/4"13"1/8"1,000—000000000000
    12 3/4"32412
    		1 5/8"13"1 1/4"15"1/8"1,000—0000000000000
     
    316 Stainless Steel
    1/4"6—1 5/8"3/8"1 1/4"1 11/16"1/16"400—000000000000
    3/8"9—1 5/8"1/2"1 1/4"1 13/16"1/16"400—000000000000
    1/2"141/4
    		1 5/8"11/16"1 1/4"1 15/16"1/16"400—000000000000
    9/16"141/4
    		1 5/8"11/16"1 1/4"2"1/16"400—000000000000
    5/8"153/8
    		1 5/8"3/4"1 1/4"2 1/16"1/16"400—00000000000
    11/16"173/8
    		1 5/8"13/16"1 1/4"2 3/16"1/16"400—000000000000
    3/4"191/2
    		1 5/8"15/16"1 1/4"2 1/4"1/16"400—000000000000
    13/16"211/2
    		1 5/8"15/16"1 1/4"2 1/4"1/16"400—00000000000
    7/8"221/2
    		1 5/8"1 1/16"1 1/4"2 5/16"1/16"400—000000000000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"400—0000000000000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"600—000000000000
    1 1/8"283/4
    		1 5/8"1 5/16"1 1/4"2 5/8"5/64"600—0000000000000
    1 1/4"311
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—0000000000000
    1 5/16"331
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—000000000000
    1 1/2"38—1 5/8"1 11/16"1 1/4"3 1/16"5/64"600—0000000000000
    1 5/8"411 1/4
    		1 5/8"1 13/16"1 1/4"3 1/4"5/64"600—000000000000
    1 11/16"421 1/4
    		1 5/8"1 15/16"1 1/4"3 5/16"7/64"800—0000000000000
    1 7/8"481 1/2
    		1 5/8"2 1/16"1 1/4"3 1/2"7/64"800—000000000000
    2 3/16"552
    		1 5/8"2 7/16"1 1/4"3 3/4"7/64"800—0000000000000
    2 3/8"602
    		1 5/8"2 9/16"1 1/4"4"7/64"800—000000000000
    2 5/8"66—1 5/8"2 13/16"1 1/4"4 5/16"7/64"800—0000000000000
    2 7/8"732 1/2
    		1 5/8"3 1/16"1 1/4"4 9/16"7/64"800—000000000000
    3 1/8"79—1 5/8"3 5/16"1 1/4"5 1/16"7/64"800—0000000000000
    3 7/16"873
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—0000000000000
    3 1/2"893
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—000000000000
    3 5/8"923
    		1 5/8"3 7/8"1 1/4"5 5/16"1/8"1,000—0000000000000
    3 15/16"1003 1/2
    		1 5/8"4 3/16"1 1/4"5 3/4"1/8"1,000—0000000000000
    4"1023 1/2
    		1 5/8"4 1/4"1 1/4"5 3/4"1/8"1,000—000000000000
    4 1/8"1043 1/2
    		1 5/8"4 3/8"1 1/4"5 7/8"1/8"1,000—0000000000000
    4 7/16"112—1 5/8"4 11/16"1 1/4"6 1/4"1/8"1,000—0000000000000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—000000000000
    5"127—1 5/8"5 1/4"1 1/4"6 3/4"1/8"1,000—0000000000000
    5 9/16"1415
    		1 5/8"5 13/16"1 1/4"7 3/4"1/8"1,000—0000000000000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"1/8"1,000—0000000000000
    7 5/8"19371 5/8"7 7/8"1 1/4"9 3/8"9/64"1,000—0000000000000
    8 5/8"2198
    		1 5/8"8 7/8"1 1/4"10 3/8"1/8"1,000—0000000000000
    10 3/4"27310
    		1 5/8"11"1 1/4"13"1/8"1,000—0000000000000
    12 3/4"32412
    		1 5/8"13"1 1/4"15"1/8"1,000—0000000000000
     
    PVC-Coated Steel
    5/8"161/2
    		1 5/8"3/4"1 1/4"2 3/16"5/64"400—00000000000
    15/16"243/4
    		1 5/8"1 1/16"1 1/4"2 7/16"1/16"600—00000000000
    1 3/16"301
    		1 5/8"1 5/16"1 1/4"2 11/16"5/64"600—00000000000
    1 7/16"371 1/4
    		1 5/8"1 9/16"1 1/4"3 1/16"5/64"600—00000000000
    1 11/16"431 1/2
    		1 5/8"1 7/8"1 1/4"3 5/16"7/64"800—00000000000
    2 3/16"562
    		1 5/8"2 3/8"1 1/4"3 3/4"7/64"800—00000000000
    3 1/2"883
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—0000000000000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—0000000000000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"9/64"1,000—0000000000000
     
    Style 2
     
    Zinc-Plated Steel
    13/16"211/2
    		1 5/8"1 1/16"1 1/4"2 1/2"5/64"400C-UL Listed, UL Listed00000000000
    1 1/16"273/4
    		1 5/8"1 5/16"1 1/4"2 3/4"5/64"500C-UL Listed, UL Listed00000000000
    1 5/16"331
    		1 5/8"1 7/16"1 1/4"3 1/8"5/64"500C-UL Listed, UL Listed00000000000
    1 11/16"431 1/4
    		1 5/8"1 15/16"1 1/4"3 1/2"5/64"500C-UL Listed, UL Listed00000000000
    1 7/8"481 1/2
    		1 5/8"2 1/8"1 1/4"4"7/64"800C-UL Listed, UL Listed00000000000
    2 3/8"602
    		1 5/8"2 5/8"1 1/4"4 1/2"7/64"800C-UL Listed, UL Listed00000000000
     

    Vibration-Damping Strut Channel Routing Clamps

    Image of Product. Front orientation. Contains Annotated, Inset. Strut Channel Framing and Fittings. Vibration-Damping Strut Channel Routing Clamps.
    Absorb shock and muffle noise from rattling pipes. The cushion inside these clamps reduces vibration to extend the life of your pipe, tubing, and conduit. Slide clamps into your strut channel and tighten the nut to secure. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed.
    Zinc-Plated Steel—The zinc plating protects these clamps from occasional exposure to moisture.
    304 Stainless Steel and 316 Stainless Steel—The choice for wet environments, these clamps resist rust.
    Flammability Rating—UL 2043 certified to generate minimal smoke in the event of a fire. These are a good choice for spaces that could spread smoke through your HVAC system, such as air intakes and ducts.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Ctr.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Temp.,
    ° F
    Flammability
    Rating
    Features
    Each
    Zinc-Plated Steel with TPE Cushion
    1/4"6—1 5/8"5/8"1 1/4"1 3/4"1/4"1/16"1,000-50 to 275UL 2043
    		Thumb Grip0000000000000
    3/8"10—1 5/8"13/16"1 1/4"1 7/8"5/16"1/16"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1/2"131/8
    		1 5/8"15/16"1 1/4"2"3/8"1/16"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    9/16"141/4
    		1 5/8"1"1 1/4"2"7/16"1/16"Not Rated-50 to 270——000000000000
    5/8"161/4
    		1 5/8"1 1/16"1 1/4"2 3/16"7/16"1/16"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    11/16"173/8
    		1 5/8"1 1/8"1 1/4"2 3/16"1/2"1/16"Not Rated-50 to 270——000000000000
    3/4"193/8
    		1 5/8"1 3/16"1 1/4"2 3/8"1/2"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    13/16"201/2
    		1 5/8"1 5/16"1 1/4"1 3/4"1/2"1/16"600-65 to 275UL 2043
    		—0000000000000
    13/16"211/2
    		1 5/8"1 5/16"1 1/4"2 1/2"9/16"5/64"Not Rated-50 to 270——000000000000
    7/8"221/2
    		1 5/8"1 5/16"1 1/4"2 1/2"9/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1"253/4
    		1 5/8"1 7/16"1 1/4"2 5/8"5/8"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1"253/4
    		1 5/8"1 11/16"1 1/4"2"11/16"1/16"600-65 to 275UL 2043
    		—0000000000000
    1 1/16"273/4
    		1 5/8"1 9/16"1 1/4"2 3/4"11/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1 1/8"293/4
    		1 5/8"1 9/16"1 1/4"2 3/4"11/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1 1/4"321
    		1 5/8"1 11/16"1 1/4"2 7/8"3/4"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1 1/4"321
    		1 5/8"1 15/16"1 1/4"2 5/16"3/4"1/16"600-65 to 275UL 2043
    		—0000000000000
    1 5/16"331
    		1 5/8"1 3/4"1 1/4"3"13/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1 3/8"351
    		1 5/8"1 13/16"1 1/4"3"13/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1 1/2"38—1 5/8"1 15/16"1 1/4"3 3/16"7/8"7/64"2,200-50 to 275UL 2043
    		Thumb Grip000000000000
    1 9/16"40—1 5/8"2 1/4"1 1/4"2 3/4"15/16"7/64"600-65 to 275UL 2043
    		—0000000000000
    1 5/8"411 1/4
    		1 5/8"2 1/16"1 1/4"3 7/16"15/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip000000000000
    1 11/16"431 1/4
    		1 5/8"2 3/16"1 1/4"3 7/16"1"7/64"Not Rated-50 to 270——000000000000
    1 3/4"441 1/4
    		1 5/8"2 3/16"1 1/4"3 9/16"1"7/64"2,200-50 to 275UL 2043
    		Thumb Grip000000000000
    1 7/8"481 1/2
    		1 5/8"2 5/16"1 1/4"3 3/4"1 1/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip000000000000
    1 15/16"501 1/2
    		1 5/8"2 3/4"1 1/4"3 1/4"1 3/16"7/64"800-65 to 275UL 2043
    		—0000000000000
    2"511 1/2
    		1 5/8"2 7/16"1 1/4"3 13/16"1 1/8"1/8"2,200-50 to 275UL 2043
    		Thumb Grip000000000000
    2 1/8"54—1 5/8"2 9/16"1 1/4"4"1 1/4"7/64"3,600-50 to 275UL 2043
    		Thumb Grip000000000000
    2 1/4"57—1 5/8"2 13/16"1 1/4"4 3/8"1 7/16"1/8"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 3/8"602
    		1 5/8"2 13/16"1 1/4"4 3/8"1 7/16"7/64"Not Rated-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 3/8"602
    		1 5/8"3 1/4"1 1/4"4 7/16"1 7/16"1/8"Not Rated-65 to 275UL 2043
    		—000000000000
    2 1/2"632
    		1 5/8"3 1/2"1 1/4"4"1 1/2"7/64"800-65 to 275UL 2043
    		—00000000000000
    2 1/2"642
    		1 5/8"2 15/16"1 1/4"4 1/2"1 7/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 5/8"67—1 5/8"3 1/16"1 1/4"4 5/8"1 1/2"1/8"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 7/8"732 1/2
    		1 5/8"3 5/16"1 1/4"4 7/8"1 11/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 15/16"752 1/2
    		1 5/8"4"1 1/4"4 1/2"1 3/4"7/64"800-65 to 275UL 2043
    		—00000000000000
    3"762 1/2
    		1 5/8"3 9/16"1 1/4"5"1 3/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    3 1/8"79—1 5/8"3 9/16"1 1/4"5 1/8"1 3/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    3 1/2"893
    		1 5/8"3 15/16"1 1/4"5 9/16"2"1/8"3,600-50 to 275UL 2043
    		Thumb Grip0000000000000
    3 9/16"903
    		1 5/8"4 3/8"1 1/4"4 15/16"2"7/64"1,000-65 to 275UL 2043
    		—00000000000000
    3 5/8"923
    		1 5/8"4 3/16"1 1/4"5 7/8"2"5/64"Not Rated-50 to 270——00000000000000
    4"1023 1/2
    		1 5/8"4 7/16"1 1/4"6 3/16"2 1/4"1/8"3,600-50 to 275UL 2043
    		Thumb Grip0000000000000
    4 1/8"1053 1/2
    		1 5/8"4 9/16"1 1/4"6 1/4"2 5/16"1/8"3,600-50 to 275UL 2043
    		Thumb Grip0000000000000
    4 5/16"110—1 5/8"5 5/16"1 1/4"5 3/4"2 7/16"7/64"1,000-65 to 275UL 2043
    		—00000000000000
    4 3/8"1114
    		1 5/8"6 1/8"1 1/4"6 9/16"2 11/16"7/64"1,000-65 to 275UL 2043
    		—00000000000000
    4 1/2"1144
    		1 5/8"4 15/16"1 1/4"6 7/8"2 1/2"1/8"3,600-50 to 275UL 2043
    		Thumb Grip00000000000000
    5 9/16"1415
    		1 5/8"6 1/2"1 1/4"7 11/16"3 1/16"1/8"Not Rated-50 to 270UL 2043
    		—0000000000000
    6 5/16"160—1 5/8"7 11/16"1 1/4"7 15/16"3 7/16"7/64"1,000-65 to 275UL 2043
    		—00000000000000
    6 5/8"1686
    		1 5/8"7 1/2"1 1/4"8 11/16"3 9/16"1/8"Not Rated-50 to 270UL 2043
    		—0000000000000
    8 5/8"2198
    		1 5/8"9 5/16"1 1/4"11 1/4"5"1/8"1,000-65 to 275UL 2043
    		—0000000000000
     
    304 Stainless Steel with TPE Cushion
    1/4"6—1 5/8"5/8"1 1/4"1 3/4"1/4"1/16"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    3/8"10—1 5/8"13/16"1 1/4"1 7/8"5/16"1/16"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    1/2"131/8
    		1 5/8"15/16"1 1/4"2"3/8"1/16"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    9/16"141/4
    		1 5/8"1"1 1/4"2"7/16"1/16"Not Rated-50 to 270——000000000000
    5/8"161/4
    		1 5/8"1 1/16"1 1/4"2 3/16"7/16"1/16"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    11/16"173/8
    		1 5/8"1 1/8"1 1/4"2 3/16"1/2"1/16"Not Rated-50 to 270——000000000000
    3/4"193/8
    		1 5/8"1 3/16"1 1/4"2 3/8"1/2"5/64"1,000-50 to 275UL 2043
    		Thumb Grip000000000000
    13/16"211/2
    		1 5/8"1 5/16"1 1/4"2 1/2"9/16"5/64"Not Rated-50 to 270——0000000000000
    7/8"221/2
    		1 5/8"1 5/16"1 1/4"2 1/2"9/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip00000000000000
    1"253/4
    		1 5/8"1 7/16"1 1/4"2 5/8"5/8"5/64"1,000-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 1/16"273/4
    		1 5/8"1 9/16"1 1/4"2 3/4"11/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 1/8"293/4
    		1 5/8"1 9/16"1 1/4"2 3/4"11/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 1/4"321
    		1 5/8"1 11/16"1 1/4"2 7/8"3/4"5/64"1,000-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 5/16"331
    		1 5/8"1 3/4"1 1/4"3 1/16"13/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 3/8"351
    		1 5/8"1 13/16"1 1/4"3"13/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 1/2"38—1 5/8"1 15/16"1 1/4"3 3/16"7/8"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 5/8"411 1/4
    		1 5/8"2 1/16"1 1/4"3 7/16"15/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 11/16"431 1/4
    		1 5/8"2 3/16"1 1/4"3 7/16"1"7/64"Not Rated-50 to 270——0000000000000
    1 3/4"441 1/4
    		1 5/8"2 3/16"1 1/4"3 9/16"1"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    1 7/8"481 1/2
    		1 5/8"2 5/16"1 1/4"3 3/4"1 1/8"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2"511 1/2
    		1 5/8"2 7/16"1 1/4"3 13/16"1 1/8"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 1/8"54—1 5/8"2 9/16"1 1/4"4"1 1/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 1/4"57—1 5/8"2 13/16"1 1/4"4 3/8"1 7/16"1/8"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 3/8"602
    		1 5/8"2 13/16"1 1/4"4 3/8"1 7/16"1/8"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 1/2"642
    		1 5/8"2 15/16"1 1/4"4 1/2"1 7/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 5/8"67—1 5/8"3 1/16"1 1/4"4 5/8"1 1/2"1/8"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    2 7/8"732 1/2
    		1 5/8"3 5/16"1 1/4"4 7/8"1 11/16"1/8"Not Rated-50 to 275UL 2043
    		Thumb Grip0000000000000
    3"762 1/2
    		1 5/8"3 9/16"1 1/4"5"1 3/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    3 1/8"79—1 5/8"3 9/16"1 1/4"5 1/8"1 3/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip0000000000000
    3 1/2"893
    		1 5/8"3 15/16"1 1/4"5 9/16"2"1/8"3,600-50 to 275UL 2043
    		Thumb Grip0000000000000
    4"1023 1/2
    		1 5/8"4 7/16"1 1/4"6 3/16"2 1/4"1/8"3,600-50 to 275UL 2043
    		Thumb Grip0000000000000
    4 1/8"1053 1/2
    		1 5/8"4 9/16"1 1/4"6 1/4"2 5/16"1/8"3,600-50 to 275UL 2043
    		Thumb Grip0000000000000
    4 1/2"1144
    		1 5/8"4 15/16"1 1/4"6 7/8"2 1/2"1/8"3,600-50 to 275UL 2043
    		Thumb Grip00000000000000
    5 9/16"1415
    		1 5/8"6 1/2"1 1/4"7 11/16"3 1/16"1/8"Not Rated-50 to 270UL 2043
    		—0000000000000
    6 5/8"1686
    		1 5/8"7 1/2"1 1/4"8 11/16"3 9/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
     
    316 Stainless Steel with TPE Cushion
    1/4"6—1 5/8"5/8"1 1/4"1 3/4"1/4"5/64"Not Rated-50 to 270UL 2043
    		—000000000000
    3/8"10—1 5/8"3/4"1 1/4"1 7/8"5/16"5/64"Not Rated-50 to 270UL 2043
    		—000000000000
    1/2"131/8
    		1 5/8"7/8"1 1/4"2"3/8"5/64"Not Rated-50 to 270UL 2043
    		—000000000000
    9/16"141/4
    		1 5/8"15/16"1 1/4"2"3/8"5/64"Not Rated-50 to 270UL 2043
    		—0000000000000
    5/8"161/4
    		1 5/8"1"1 1/4"2 1/8"7/16"5/64"Not Rated-50 to 270UL 2043
    		—000000000000
    11/16"173/8
    		1 5/8"1 1/16"1 1/4"2 3/16"7/16"5/64"Not Rated-50 to 270UL 2043
    		—0000000000000
    3/4"193/8
    		1 5/8"1 5/16"1 1/4"2 7/16"9/16"5/64"Not Rated-50 to 270UL 2043
    		—000000000000
    13/16"211/2
    		1 5/8"1 7/16"1 1/4"2 1/2"5/8"5/64"Not Rated-50 to 270UL 2043
    		—00000000000000
    7/8"221/2
    		1 5/8"1 7/16"1 1/4"2 1/2"9/16"5/64"Not Rated-50 to 270UL 2043
    		—0000000000000
    1"253/4
    		1 5/8"1 11/16"1 1/4"2 11/16"11/16"7/64"Not Rated-50 to 270UL 2043
    		—0000000000000
    1 1/16"273/4
    		1 5/8"1 13/16"1 1/4"2 13/16"3/4"7/64"Not Rated-50 to 270UL 2043
    		—00000000000000
    1 1/8"293/4
    		1 5/8"1 13/16"1 1/4"2 13/16"3/4"7/64"Not Rated-50 to 270UL 2043
    		—0000000000000
    1 1/4"321
    		1 5/8"1 15/16"1 1/4"2 15/16"13/16"7/64"Not Rated-50 to 270UL 2043
    		—00000000000000
    1 5/16"331
    		1 5/8"2 1/4"1 1/4"3 3/8"7/8"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    1 3/8"351
    		1 5/8"2 1/4"1 1/4"3 1/4"13/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    1 1/2"38—1 5/8"2 1/4"1 1/4"3 5/16"15/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    1 5/8"411 1/4
    		1 5/8"2 1/2"1 1/4"3 5/16"1"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    1 11/16"431 1/4
    		1 5/8"2 1/2"1 1/4"3 11/16"1 1/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    1 3/4"441 1/4
    		1 5/8"2 1/2"1 1/4"3 11/16"1 1/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    1 7/8"481 1/2
    		1 5/8"2 1/2"1 1/4"3 7/8"1 3/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    2"511 1/2
    		1 5/8"2 3/4"1 1/4"3 7/8"1 3/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    2 1/8"54—1 5/8"3"1 1/4"4 1/4"1 5/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    2 1/4"57—1 5/8"3 1/4"1 1/4"4 7/16"1 7/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    2 3/8"602
    		1 5/8"3 1/4"1 1/4"4 7/16"1 7/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    2 1/2"642
    		1 5/8"3 1/2"1 1/4"4 5/8"1 9/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    2 5/8"67—1 5/8"3 1/2"1 1/4"4 5/8"1 9/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    2 7/8"732 1/2
    		1 5/8"3 3/4"1 1/4"4 15/16"1 11/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    3"762 1/2
    		1 5/8"4"1 1/4"5 1/8"1 13/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    3 1/8"79—1 5/8"4"1 1/4"5 1/8"1 13/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    3 1/2"893
    		1 5/8"4 3/8"1 1/4"5 9/16"2"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    3 5/8"923
    		1 5/8"4 1/2"1 1/4"5 5/8"2 1/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    4"1023 1/2
    		1 5/8"5"1 1/4"6 3/16"2 5/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    4 1/8"1053 1/2
    		1 5/8"5 1/16"1 1/4"6 1/4"2 3/8"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    4 3/8"1114
    		1 5/8"5 1/2"1 1/4"6 11/16"2 9/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    5 9/16"1415
    		1 5/8"6 1/2"1 1/4"7 11/16"3 1/16"1/8"Not Rated-50 to 270UL 2043
    		—00000000000000
    6 5/8"1686
    		1 5/8"7 1/2"1 1/4"8 11/16"3 9/16"1/8"Not Rated-50 to 270UL 2043
    		—000000000000000
     

    Standoff Strut Channel Routing Clamps

    Image of ProductInUse. Parallel-Mounted Clamp Shown Installed. Front orientation. Strut Channel Framing and Fittings. Standoff Strut Channel Routing Clamps, Zinc-Plated Steel, Parallel Mount.
    Image of ProductInUse. Perpendicular-Mounted Clamp Shown Installed. Front orientation. Strut Channel Framing and Fittings. Standoff Strut Channel Routing Clamps, Zinc-Plated Steel, Perpendicular Mount.
    Image of Product. Parallel Mount. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Standoff Strut Channel Routing Clamps, Zinc-Plated Steel, Parallel Mount.
    Image of Product. Perpendicular Mount. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Standoff Strut Channel Routing Clamps, Zinc-Plated Steel, Perpendicular Mount.

    Parallel-Mounted

    Clamp Shown

    Installed

    Perpendicular-Mounted

    Clamp Shown Installed

    Parallel Mount

    Perpendicular Mount

    Hold pipe and conduit away from strut channel so components don’t rub and wear. The extra clearance also permits airflow, which prevents condensation build-up and heat transfer from hot pipes to your channel. Slide clamps into the end of channel and tighten the screw.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Ctr.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Each
    Zinc-Plated Steel
     
    Parallel Mount
    11/16"173/8
    		1 5/8"1 1/4"13/16"3 3/16"2 1/16"1/16"Not Rated000000000000
    13/16"211/2
    		1 5/8"1 1/4"15/16"3 3/8"2 3/16"1/16"Not Rated00000000000
    1 1/16"273/4
    		1 5/8"1 1/4"1 3/16"3 5/8"2 5/16"5/64"Not Rated00000000000
    1 5/16"331
    		1 5/8"1 1/4"1 7/16"4"2 1/4"5/64"Not Rated00000000000
    1 11/16"431 1/4
    		1 5/8"1 1/4"1 13/16"4 3/8"2 1/2"5/64"Not Rated00000000000
    1 7/8"481 1/2
    		1 5/8"1 1/4"2 1/8"4 3/4"2 5/8"7/64"Not Rated00000000000
    2 3/8"602
    		1 5/8"1 1/4"2 9/16"5 3/8"3 1/8"7/64"Not Rated000000000000
    2 7/8"732 1/2
    		1 5/8"1 1/4"3 1/16"5 3/4"3 1/8"7/64"Not Rated00000000000
    3 1/2"893
    		1 5/8"1 1/4"3 11/16"6 3/8"3 3/8"7/64"Not Rated000000000000
    4"1023 1/2
    		1 5/8"1 1/4"4 1/4"7"3 7/8"1/8"Not Rated000000000000
    4 1/2"1144
    		1 5/8"1 1/4"4 3/4"7 3/8"3 13/16"1/8"Not Rated000000000000
     
    Perpendicular Mount
    11/16"173/8
    		1 5/8"2 3/8"1 1/4"2 13/16"1 3/16"5/64"25000000000000
    13/16"211/2
    		1 5/8"2 7/16"1 1/4"3"1 1/4"5/64"3500000000000
    1 1/16"273/4
    		1 5/8"2 1/2"1 1/4"3 3/16"1 5/16"5/64"4000000000000
    1 5/16"341
    		1 5/8"2 5/8"1 1/4"3 7/16"1 1/2"5/64"50000000000000
    1 11/16"421 1/4
    		1 5/8"2 13/16"1 1/4"3 13/16"1 11/16"7/64"70000000000000
    1 7/8"481 1/2
    		1 5/8"2 7/8"1 1/4"4"1 3/4"1/8"80000000000000
    2 3/8"612
    		1 5/8"3 1/16"1 1/4"4 9/16"2"9/64"120000000000000
     

    Strut Channel Routing Clamps for Insulated Pipe

    Image of Product. Front orientation. Contains Annotated, Inset, MultipleImages. Strut Channel Framing and Fittings. Strut Channel Routing Clamps for Insulated Pipe.
    Mount pipe to strut channel without crushing the insulation or exposing the pipe. A polyolefin plastic insert seals around the insulation to prevent sweating that can cause mold and corrosion. To install these clamps, slide into the strut channel, insert the insulated pipe, and tighten the screw to secure. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    Flammability Rating—UL 2043 certified to generate minimal smoke in the event of a fire. These are a good choice for spaces that could spread smoke through your HVAC system, such as air intakes and ducts.
    ID
    Inch
    Metric,
    mm
    For Insulation
    Thk.
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Ctr.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Temp.,
    ° F
    Flammability
    Rating
    Each
    Zinc-Plated Steel with Polyolefin Insert
    1/4"61/2"—1 5/8"1 3/8"2"2 13/16"11/16"5/64"230-60 to 225UL 2043
    		0000000000000
    1/4"63/4"—1 5/8"1 7/8"2"3 11/16"15/16"1/8"230-60 to 225UL 2043
    		000000000000
    1/4"61"—1 5/8"2 3/8"2"4 3/16"1 3/16"1/8"230-60 to 225UL 2043
    		0000000000000
    5/16"81"—1 5/8"2 7/16"2"4 3/16"1 3/16"1/8"230-60 to 225UL 2043
    		0000000000000
    3/8"101/2"—1 5/8"1 1/2"2"2 15/16"3/4"5/64"230-60 to 225UL 2043
    		000000000000
    3/8"103/4"—1 5/8"2"2"3 11/16"1"1/8"230-60 to 225UL 2043
    		000000000000
    3/8"101"—1 5/8"2 1/2"2"4 3/16"1 1/4"1/8"230-60 to 225UL 2043
    		0000000000000
    1/2"131/2"1/8
    		1 5/8"1 5/8"2"3 3/8"3/4"5/64"230-60 to 225UL 2043
    		000000000000
    1/2"133/4"1/8
    		1 5/8"2 1/16"2"3 13/16"1"1/8"230-60 to 225UL 2043
    		000000000000
    1/2"131"1/8
    		1 5/8"2 5/8"2"4 5/16"1 1/4"1/8"230-60 to 225UL 2043
    		0000000000000
    5/8"161/2"1/4
    		1 5/8"1 3/4"2"3 3/8"13/16"5/64"230-60 to 225UL 2043
    		000000000000
    5/8"161/2"1/4
    		1 5/8"1 13/16"2"3 3/8"13/16"1/8"230-60 to 225UL 2043
    		000000000000
    5/8"163/4"1/4
    		1 5/8"2 1/4"2"3 15/16"1 1/16"1/8"230-60 to 225UL 2043
    		000000000000
    5/8"161"1/4
    		1 5/8"2 3/4"2"4 7/16"1 5/16"1/8"230-60 to 225UL 2043
    		0000000000000
    5/8"161"1/4
    		1 5/8"3"2"4 11/16"1 7/16"1/8"230-60 to 225UL 2043
    		0000000000000
    5/8"162"1/4
    		1 5/8"4 5/8"2"6 5/16"2 1/4"1/8"Not Rated-60 to 225UL 2043
    		0000000000000
    3/4"191/2"3/8
    		1 5/8"1 7/8"2"3 11/16"7/8"5/64"230-60 to 225UL 2043
    		000000000000
    3/4"193/4"3/8
    		1 5/8"2 3/8"2"4 1/16"1 1/8"1/8"230-60 to 225UL 2043
    		000000000000
    3/4"191"3/8
    		1 5/8"2 7/8"2"4 9/16"1 3/8"1/8"230-60 to 225UL 2043
    		0000000000000
    7/8"221/2"1/2
    		1 5/8"2"2"3 11/16"15/16"5/64"230-60 to 225UL 2043
    		000000000000
    7/8"221/2"1/2
    		1 5/8"2"2"3 11/16"15/16"1/8"230-60 to 225UL 2043
    		000000000000
    7/8"223/4"1/2
    		1 5/8"2 1/2"2"4 3/16"1 3/16"1/8"245-60 to 225UL 2043
    		0000000000000
    7/8"221"1/2
    		1 5/8"3"2"4 11/16"1 7/16"1/8"265-60 to 225UL 2043
    		0000000000000
    7/8"222"1/2
    		1 5/8"5 1/8"2"7 3/8"2 1/2"1/8"Not Rated-60 to 225UL 2043
    		0000000000000
    1"251/2"3/4
    		1 5/8"2 1/8"2"3 13/16"1"5/64"360-60 to 225UL 2043
    		000000000000
    1"251"3/4
    		1 5/8"3"2"4 11/16"1 5/16"1/8"265-60 to 225UL 2043
    		0000000000000
    1 1/8"291/2"3/4
    		1 5/8"2 1/4"2"3 15/16"1 1/16"7/64"490-60 to 225UL 2043
    		000000000000
    1 1/8"291/2"3/4
    		1 5/8"2 5/16"2"3 15/16"1 1/16"1/8"490-60 to 225UL 2043
    		000000000000
    1 1/8"293/4"3/4
    		1 5/8"2 3/4"2"4 7/16"1 1/4"1/8"430-60 to 225UL 2043
    		0000000000000
    1 1/8"291"3/4
    		1 5/8"3"2"4 11/16"1 7/16"1/8"370-60 to 225UL 2043
    		0000000000000
    1 1/8"291"3/4
    		1 5/8"3 1/4"2"5 1/16"1 9/16"1/8"370-60 to 225UL 2043
    		0000000000000
    1 1/8"292"3/4
    		1 5/8"5 1/8"2"7 3/8"2 1/2"1/8"Not Rated-60 to 225UL 2043
    		0000000000000
    1 1/4"321"1
    		1 5/8"3 5/8"2"5 1/4"1 11/16"1/8"425-60 to 225UL 2043
    		0000000000000
    1 3/8"351/2"1
    		1 5/8"2 1/2"2"4 1/16"1 1/8"1/8"625-60 to 225UL 2043
    		0000000000000
    1 3/8"351/2"1
    		1 5/8"2 1/2"2"4 3/16"1 3/16"1/8"625-60 to 225UL 2043
    		0000000000000
    1 3/8"353/4"1
    		1 5/8"3"2"4 11/16"1 1/2"1/8"525-60 to 225UL 2043
    		0000000000000
    1 3/8"351"1
    		1 5/8"3 1/2"2"5 1/8"1 3/4"1/8"425-60 to 225UL 2043
    		0000000000000
    1 3/8"351"1
    		1 5/8"3 5/8"2"5 1/4"1 3/4"1/8"425-60 to 225UL 2043
    		0000000000000
    1 3/8"352"1
    		1 5/8"5 11/16"2"7 7/8"2 3/4"1/8"Not Rated-60 to 225UL 2043
    		0000000000000
    1 9/16"401"—1 5/8"3 5/8"2"5 1/4"1 11/16"1/8"555-60 to 225UL 2043
    		0000000000000
    1 5/8"411/2"1 1/4
    		1 5/8"2 3/4"2"4 7/16"1 5/16"1/8"675-60 to 225UL 2043
    		0000000000000
    1 5/8"411/2"1 1/4
    		1 5/8"2 7/8"2"4 9/16"1 3/8"1/8"675-60 to 225UL 2043
    		0000000000000
    1 5/8"413/4"1 1/4
    		1 5/8"3 1/4"2"5 1/16"1 9/16"1/8"600-60 to 225UL 2043
    		0000000000000
    1 5/8"411"1 1/4
    		1 5/8"3 5/8"2"5 1/4"1 3/4"1/8"555-60 to 225UL 2043
    		0000000000000
    1 5/8"411"1 1/4
    		1 5/8"3 3/4"2"5 7/16"1 13/16"1/8"555-60 to 225UL 2043
    		0000000000000
    1 5/8"412"1 1/4
    		1 5/8"5 11/16"2"7 7/8"2 3/4"1/8"Not Rated-60 to 225UL 2043
    		0000000000000
    1 15/16"491"1 1/2
    		1 5/8"4 1/8"2"5 11/16"1 7/8"1/8"690-60 to 225UL 2043
    		0000000000000
    2 1/8"541/2"—1 5/8"3 1/4"2"5 1/16"1 9/16"1/8"730-60 to 225UL 2043
    		0000000000000
    2 1/8"541/2"—1 5/8"3 5/16"2"5 1/16"1 9/16"1/8"730-60 to 225UL 2043
    		0000000000000
    2 1/8"543/4"—1 5/8"3 3/4"2"5 7/16"1 13/16"1/8"675-60 to 225UL 2043
    		0000000000000
    2 1/8"541"—1 5/8"4 1/8"2"5 11/16"2"1/8"690-60 to 225UL 2043
    		0000000000000
    2 1/8"541"—1 5/8"4 1/4"2"6"2 1/16"1/8"690-60 to 225UL 2043
    		0000000000000
    2 1/2"641"2
    		1 5/8"4 5/8"2"6 5/16"2 3/16"1/8"690-60 to 225UL 2043
    		0000000000000
    2 5/8"671/2"—1 5/8"3 3/4"2"5 7/16"1 13/16"1/8"785-60 to 225UL 2043
    		0000000000000
    2 5/8"673/4"—1 5/8"4 1/4"2"6"2 1/16"1/8"750-60 to 225UL 2043
    		0000000000000
    2 5/8"671"—1 5/8"4 5/8"2"6 5/16"2 1/4"1/8"820-60 to 225UL 2043
    		0000000000000
    2 5/8"671"—1 5/8"4 3/4"2"6 13/16"2 5/16"1/8"820-60 to 225UL 2043
    		0000000000000
    2 15/16"751"2 1/2
    		1 5/8"5 1/8"2"7 3/8"2 7/16"1/8"825-60 to 225UL 2043
    		0000000000000
    3 1/8"791/2"—1 5/8"4 1/4"2"6"2 1/16"1/8"840-60 to 225UL 2043
    		0000000000000
    3 1/8"793/4"—1 5/8"4 3/4"2"6 13/16"2 5/16"1/8"825-60 to 225UL 2043
    		0000000000000
    3 1/8"791"—1 5/8"5 1/8"2"7 3/8"2 1/2"1/8"950-60 to 225UL 2043
    		0000000000000
    3 1/8"791"—1 5/8"5 1/4"2"7 3/8"2 9/16"1/8"950-60 to 225UL 2043
    		0000000000000
    3 9/16"901"3
    		1 5/8"5 3/4"2"7 7/8"2 11/16"1/8"950-60 to 225UL 2043
    		0000000000000
    3 5/8"921/2"3
    		1 5/8"4 3/4"2"6 13/16"2 5/16"1/8"840-60 to 225UL 2043
    		0000000000000
    3 5/8"923/4"3
    		1 5/8"5 1/4"2"7 3/8"2 9/16"1/8"825-60 to 225UL 2043
    		0000000000000
    3 5/8"921"3
    		1 5/8"5 3/4"2"7 7/8"2 13/16"1/8"950-60 to 225UL 2043
    		0000000000000
    4 1/8"1051/2"3 1/2
    		1 5/8"5 1/4"2"7 3/8"2 9/16"1/8"895-60 to 225UL 2043
    		0000000000000
    4 1/8"1053/4"3 1/2
    		1 5/8"5 3/4"2"7 7/8"2 13/16"1/8"900-60 to 225UL 2043
    		0000000000000
    4 1/8"1051"3 1/2
    		1 5/8"6 1/4"2"8 3/8"3 1/16"1/8"1,085-60 to 225UL 2043
    		0000000000000
     

    Adjustable Strut Channel Routing Clamps

    Image of Product. Front orientation. Contains Annotated, Inset, Border, MultipleImages. Strut Channel Framing and Fittings. Adjustable Strut Channel Routing Clamps.
    Secure a range of pipe sizes with a single clamp. The vertical adjustment bolt is easy to access and turn. Slide clamps into the end of channel and tighten around pipe. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
     
    Zinc-Plated Steel
    3/8" to 11/16"10 to 171/8, 3/8
    		1 5/8"1"3/4"1 3/4"1/16"200C-UL Listed, UL Listed00000000000
    5/8" to 7/8"16 to 223/8, 1/2
    		1 5/8"1 1/4"3/4"2"1/16"200C-UL Listed, UL Listed0000000000
    3/4" to 1 1/8"19 to 293/8, 3/4
    		1 5/8"1 1/2"3/4"2 1/4"1/16"200C-UL Listed, UL Listed0000000000
    1" to 1 1/2"25 to 383/4, 1
    		1 5/8"1 3/4"3/4"2 1/2"1/16"200C-UL Listed, UL Listed00000000000
    1 1/4" to 1 11/16"32 to 431, 1 1/4
    		1 5/8"2 1/4"3/4"2 3/4"7/64"350C-UL Listed, UL Listed00000000000
    1 3/4" to 2 3/16"44 to 561 1/2
    		1 5/8"2 3/4"3/4"3 1/4"7/64"350C-UL Listed, UL Listed00000000000
     

    Low-Profile Strut Channel Routing Clamps

    Image of Product. Front orientation. Contains Annotated, Inset, MultipleImages. Strut Channel Framing and Fittings. Low-Profile Strut Channel Routing Clamps.
    Save space in tight-clearance installations with clamps that don’t stick out above pipe, conduit, and tubing. Slide a bolt through the mounting hole and into a strut channel nut to secure.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Thk.
    Ctr.-to-Ctr.
    Wt. Cap.
    Mounting
    Hole Dia.
    Each
     
    Zinc-Plated Steel
    1/4"6—1 5/8"1 3/16"1 5/8"1/16"9/16"Not Rated1/4"000000000000
    5/16"8—1 5/8"1 1/4"1 5/8"1/16"9/16"Not Rated1/4"00000000000
    3/8"10—1 5/8"1 5/16"1 5/8"1/16"5/8"Not Rated1/4"00000000000
    1/2"131/8
    		1 5/8"1 7/16"1 5/8"1/16"5/8"Not Rated1/4"00000000000
    5/8"161/4
    		1 5/8"1 5/8"1 5/8"5/64"3/4"Not Rated1/4"00000000000
    3/4"193/8
    		1 5/8"1 11/16"1 5/8"5/64"13/16"Not Rated1/4"00000000000
    7/8"221/2
    		1 5/8"1 13/16"1 5/8"5/64"7/8"Not Rated1/4"00000000000
    1"253/4
    		1 5/8"1 15/16"1 5/8"5/64"7/8"Not Rated1/4"00000000000
     

    Strut Channel Spool Rack Mounts

    Image of ProductInUse. Left-Side Mount Shown Installed. Front orientation. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Left-Side Mount.
    Image of ProductInUse. Right-Side Mount Shown Installed. Front orientation. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Right-Side Mount.
    Image of ProductInUse. Center Mount Shown Installed. Front orientation. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Center Mount.
    Image of Product. Left-Side Mount. Back orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Left-Side Mount.
    Image of Product. Right-Side Mount. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Right-Side Mount.
    Image of Product. Center Mount. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Center Mount.

    Left-Side

    Mount

    Shown

    Installed

    Right-Side

    Mount

    Shown

    Installed

    Center

    Mount

    Shown

    Installed

    Left-Side Mount

    Right-Side Mount

    Center Mount

    Hang rods and pipe between strut channel to create your own spool racks for dispensing wire, hose, and tubing.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    Hole
    For Channel
    Wd.
    For No.
    of Rails
    For Pipe
    Size
    For Max.
    Rail OD
    Wt. Cap.,
    lb.
    Lg.
    Wd.
    Thk.
    Projection
    No.
    of
    Dia.
    Fasteners
    Included
    Each
    Zinc-Plated Steel
     
    Left-Side Mount
    1 5/8"11 1/4
    		1 5/8"2,0005 3/8"1 5/8"1/4"3"29/16"No0000000000000
     
    Right-Side Mount
    1 5/8"11 1/4
    		1 5/8"2,0005 3/8"1 5/8"1/4"3"29/16"No000000000000
     
    Center Mount
    1 5/8"21 1/4
    		1 5/8"4,0007 5/8"3"1/4"3"39/16"No0000000000000
     

    Quick-Connect Strut Channel

    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Quick-Connect Strut Channel.
    Cut the time and cost of installing conduit and pipe. This strut channel has a slotted grid for snapping in routing clamps—no tools or fasteners needed. It also has a standard 15/8” channel opening, so you can hang it with compatible components.
    Channel
    Image of Product. Channel. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel, Channel, Slotted Grid.
    Image of Attribute. Front orientation. Contains Annotated. Standard, Channel.

    Channel

    Galvanized Steel—An economical alternative to stainless steel channel, this channel withstands wet and outdoor environments. However, it won't hold up to salt water or chemicals.
    Narrow
    Slots
    Standard
    Slots
    Channel
    Material
    Slot
    Lg.
    Slot
    Wd.
    Slot
    Lg.
    Slot
    Wd.
    Ht.
    Wd.
    Inside Channel
    Wd.
    Thk.
    14"
    Long
    4 1/2 ft.
    Long
    5 1/2 ft.
    Long
    8 1/2 ft.
    Long
    Slotted Grid
    Galvanized Steel1/8"13/16"1 1/8"9/16"1 5/8"1 5/8"7/8"0.11"0000000
    00000
    000000
    000000
    000000
     
    Routing Clamp Mounts
    Image of Product. Routing Clamp Mount. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel, Zinc-Plated Steel.

    Routing Clamp Mount

    Routing Clamp Mounts—Snap into the open side of your quick-connect strut channel and add routing clamps to run conduit and pipe on both sides.
    Lg.
    Wd.
    Ht.
    Each
    Zinc-Plated Steel
    1 7/8"13/16"1 1/2"000000000000
     
    Channel Adapters
    Image of Product. Channel Adapter. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel, 1/8" Long Slot × 13/16" Wide Slot.

    Channel Adapter

    Channel Adapters—Double the mounting space on your strut channel. Attach these adapters to 15/8" wide channel to add a quick-connect slotted grid. Once installed, you can mount conduit and pipe on both sides.
    Lg.
    Ht.
    Thk.
    Hole
    Dia.
    Fasteners
    Included
    Each
    1/8" Long Slot × 13/16" Wide Slot
     
    Galvanized Steel
    14"5/16"0.11"7/16"No000000000000
    24"5/16"0.11"7/16"No000000000000
     
    Routing Clamps
    Image of Product. Routing Clamp. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel, Snap In.

    Routing Clamp

    Routing Clamps—Attach these clamps to quick-connect channel to route pipe, conduit, and tubing around your facility. Clamps can be removed and reinserted, so they’re easy to reposition and reuse.
    For EMT Conduit
    For RMC Conduit
    For Pipe
    For Pipe
    Size
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    ID
    Each
    ID
    Each
    ID
    Each
    Snap In
     
    Zinc-Plated Steel
    1/2
    		1 7/16"1 1/2"40011/16"000000000000————0————0
    1/2
    		1 9/16"1 1/2"400————013/16"00000000000013/16"000000000000
    3/4
    		1 5/8"1 1/2"40015/16"00000000000————0————0
    3/4
    		1 13/16"1 1/2"400————01 1/16"000000000001 1/16"00000000000
    1
    		1 7/8"1 1/2"4001 3/16"00000000000————0————0
    1
    		2 1/16"1 1/2"400————01 5/16"000000000001 5/16"00000000000
    1 1/4
    		2 1/4"1 1/2"4001 1/2"00000000000————0————0
    1 1/4
    		2 3/8"1 1/2"400————0————01 11/16"00000000000
    1 1/2
    		2 5/8"1 1/2"400————0————01 7/8"00000000000
    2
    		2 15/16"1 1/2"4002 3/16"00000000000————0————0
    2
    		3 1/8"1 1/2"400————0————02 3/8"00000000000
     

    Quick-Connect Low-Profile Strut Channel

    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel.
    It’s a snap to install conduit and pipe in tight spots. Half the height of other quick-connect channel, it fits beneath flooring and along obstructed ceilings and walls. Channel has a row of slotted grid for routing clamps—just push them into place. It also has a standard 15/8” channel opening, so you can hang it with compatible components.
    Channel
    Image of Product. Channel. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel, Channel, Slotted Grid.
    Image of Attribute. Front orientation. Contains Annotated. Low Profile, Channel.

    Channel

    Galvanized Steel—An economical alternative to stainless steel channel, this channel withstands wet and outdoor environments. However, it won't hold up to salt water or chemicals.
    Narrow
    Slots
    Standard
    Slots
    Channel
    Material
    Slot
    Lg.
    Slot
    Wd.
    Slot
    Lg.
    Slot
    Wd.
    Ht.
    Wd.
    Inside Channel
    Wd.
    Thk.
    14"
    Long
    1 1/2 ft.
    Long
    6 1/2 ft.
    Long
    Slotted Grid
    Galvanized Steel1/8"13/16"1 1/8"9/16"13/16"1 5/8"7/8"0.11"0000000
    00000
    00000
    000000
     
    Routing Clamp Mounts
    Image of Product. Routing Clamp Mount. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel, Zinc-Plated Steel.

    Routing Clamp Mount

    Routing Clamp Mounts—Snap into the open side of your quick-connect strut channel and add routing clamps to run conduit and pipe on both sides.
    Lg.
    Wd.
    Ht.
    Each
    Zinc-Plated Steel
    1 7/8"13/16"1 1/2"000000000000
     
    Channel Adapters
    Image of Product. Channel Adapter. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel, 1/8" Long Slot × 13/16" Wide Slot.

    Channel Adapter

    Channel Adapters—Double the mounting space on your strut channel. Attach these adapters to 15/8" wide channel to add a quick-connect slotted grid. Once installed, you can mount conduit and pipe on both sides.
    Lg.
    Ht.
    Thk.
    Hole
    Dia.
    Fasteners
    Included
    Each
    1/8" Long Slot × 13/16" Wide Slot
     
    Galvanized Steel
    14"5/16"0.11"7/16"No000000000000
    24"5/16"0.11"7/16"No000000000000
     
    Routing Clamps
    Image of Product. Routing Clamp. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel, Snap In.

    Routing Clamp

    Routing Clamps—Attach these clamps to quick-connect channel to route pipe, conduit, and tubing around your facility. Clamps can be removed and reinserted, so they’re easy to reposition and reuse.
    For EMT Conduit
    For RMC Conduit
    For Pipe
    For Pipe
    Size
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    ID
    Each
    ID
    Each
    ID
    Each
    Snap In
     
    Zinc-Plated Steel
    1/2
    		1 7/16"1 1/2"40011/16"000000000000————0————0
    1/2
    		1 9/16"1 1/2"400————013/16"00000000000013/16"000000000000
    3/4
    		1 5/8"1 1/2"40015/16"00000000000————0————0
    3/4
    		1 13/16"1 1/2"400————01 1/16"000000000001 1/16"00000000000
    1
    		1 7/8"1 1/2"4001 3/16"00000000000————0————0
    1
    		2 1/16"1 1/2"400————01 5/16"000000000001 5/16"00000000000
    1 1/4
    		2 1/4"1 1/2"4001 1/2"00000000000————0————0
    1 1/4
    		2 3/8"1 1/2"400————0————01 11/16"00000000000
    1 1/2
    		2 5/8"1 1/2"400————0————01 7/8"00000000000
    2
    		2 15/16"1 1/2"4002 3/16"00000000000————0————0
    2
    		3 1/8"1 1/2"400————0————02 3/8"00000000000
     

    Quick-Connect Strut Channel Adapters

    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Quick-Connect Strut Channel Adapters.
    Double the mounting space on your strut channel. Attach these adapters to 15/8" wide channel to add a quick-connect slotted grid. Once installed, you can mount conduit and pipe on both sides.
    Channel Adapters
    Image of Product. Channel Adapter. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel Adapters, Channel Adapters, For 1 5/8" Channel Width.
    Image of Attribute. Front orientation. Contains Annotated. Channel Adapters.

    Channel Adapter

    Galvanized Steel—An economical alternative to stainless steel, these withstand wet and outdoor environments. However, they won't hold up to salt water and chemicals.
    Slot
    Lg.
    Ht.
    Thk.
    Lg.
    Wd.
    Hole
    Dia.
    Fasteners
    Included
    Each
    For 1 5/8" Channel Width
     
    Galvanized Steel
    14"5/16"0.11"1/8"13/16"7/16"No000000000000
    24"5/16"0.11"1/8"13/16"7/16"No000000000000
     
    Routing Clamps
    Image of Product. Routing Clamp. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel Adapters, Snap In.

    Routing Clamp

    Routing Clamps—Attach these clamps to quick-connect channel to route pipe, conduit, and tubing around your facility. Clamps can be removed and reinserted, so they’re easy to reposition and reuse.
    For EMT Conduit
    For RMC Conduit
    For Pipe
    For Pipe
    Size
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    ID
    Each
    ID
    Each
    ID
    Each
    Snap In
     
    Zinc-Plated Steel
    1/2
    		1 7/16"1 1/2"40011/16"000000000000————0————0
    1/2
    		1 9/16"1 1/2"400————013/16"00000000000013/16"000000000000
    3/4
    		1 5/8"1 1/2"40015/16"00000000000————0————0
    3/4
    		1 13/16"1 1/2"400————01 1/16"000000000001 1/16"00000000000
    1
    		1 7/8"1 1/2"4001 3/16"00000000000————0————0
    1
    		2 1/16"1 1/2"400————01 5/16"000000000001 5/16"00000000000
    1 1/4
    		2 1/4"1 1/2"4001 1/2"00000000000————0————0
    1 1/4
    		2 3/8"1 1/2"400————0————01 11/16"00000000000
    1 1/2
    		2 5/8"1 1/2"400————0————01 7/8"00000000000
    2
    		2 15/16"1 1/2"4002 3/16"00000000000————0————0
    2
    		3 1/8"1 1/2"400————0————02 3/8"00000000000
     

    Snap-In Vibration-Damping Strut Channel Routing Clamps

    Image of Product. Front orientation. Contains Annotated, Inset, MultipleImages. Strut Channel Framing and Fittings. Snap-In Vibration-Damping Strut Channel Routing Clamps.
    Install these clamps once, then snap pipes in and out without having to loosen any fasteners. Clamps are made of flexible TPE rubber that absorbs vibration to extend the life of your pipe, tube, and conduit. More economical than our other routing clamps, use them for drain lines or light duty runs of pipe and tubing for air.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Ctr.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Temp.,
    ° F
    Each
    TPE Rubber
    1/4"6—1 5/8"1 5/16"1 3/8"1 5/16"3/16"5/64"75-50 to 27500000000000000
    3/8"10—1 5/8"1 5/16"1 3/8"1 1/2"5/16"5/64"75-50 to 2750000000000000
    1/2"131/8
    		1 5/8"1 1/2"1 3/8"1 13/16"7/16"3/32"75-50 to 2750000000000000
    5/8"161/4
    		1 5/8"1 1/2"1 3/8"2"1/2"7/64"75-50 to 2750000000000000
    3/4"183/8
    		1 5/8"1 1/2"1 3/8"2 1/8"1/2"1/8"75-50 to 2750000000000000
    3/4"193/8
    		1 5/8"1 1/2"1 3/8"2 1/8"9/16"9/64"75-50 to 2750000000000000
    7/8"221/2
    		1 5/8"1 5/8"1 3/8"2 1/2"11/16"5/32"75-50 to 2750000000000000
    15/16"233/4
    		1 5/8"1 5/8"1 3/8"2 1/2"11/16"5/32"75-50 to 2750000000000000
    1 1/8"293/4
    		1 5/8"1 15/16"1 3/8"2 7/8"13/16"3/16"75-50 to 2750000000000000
    1 3/16"301
    		1 5/8"1 15/16"1 3/8"3"13/16"3/16"75-50 to 2750000000000000
     
    back to top