McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    495 Products

    For Use With

    Performance

    Grommets

    Image of Product. Front orientation. Grommets. Grommets, Style 1.
    Image of Product. Front orientation. Grommets. Grommets, Style 2.
    Image of Product. Front orientation. Grommets. Grommets, Style 3.
    Image of Product. Front orientation. Grommets. Grommets, Style 4.

    Style 1

    Style 2

    Style 3

    Style 4

    Image of Product. Front orientation. Grommets. Grommets, Style 5.
    Image of Product. Front orientation. Grommets. Grommets, Style 6.
    Image of Product. Front orientation. Grommets. Grommets, Style 7.
    Image of Product. Front orientation. Grommets. Grommets, Style 8.

    Style 5

    Style 6

    Style 7

    Style 8

    Protect wire, cable, and cords from holes with sharp or rough edges. Found everywhere from enclosures to machine panels, these grommets keep cords from fraying to extend service life and prevent electrical shorts. With a flexible rubber design, they push easily into holes and reduce vibration in and around sensitive components.
    Style 1
    Image of Product. Front orientation. Grommets. Grommets, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Grommets, Style 1.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Oil-Resistant Buna-N—These resist oil and fuels better than other rubber grommets. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
    High-Temperature Silicone Rubber—These keep their shape and strength at higher temperatures than any of our other rubber grommets.
    Pkg.
    For Hole
    Dia.
    For Material
    Thk.
    ID
    Flange
    Dia.
    Overall
    Ht.
    Temp.,
    ° F
    For Use
    Outdoors
    Color
    Specs. Met
    Pkg.
    Qty.
    1-9
    10-24
    25-Up
    Multipurpose SBR Rubber
    5/32"3/64"7/64"1/4"11/64"-30 to 170NoBlack—509600K73000000000000000000
    5/32"3/32"7/64"1/4"11/64"-30 to 170NoBlack—109600K75000000000000000
    3/16"1/16"1/8"11/32"7/32"-30 to 170NoBlack—1009600K17000000000000000
    3/16"1/16"9/64"11/32"3/16"-30 to 170NoBlack—509600K171000000000000000
    7/32"3/32"5/32"9/32"7/32"-30 to 170NoBlack—59600K11400000000000000
    1/4"1/16"1/8"11/32"7/32"-30 to 170NoBlack—1009600K1100000000000000
    9/32"3/32"3/16"13/32"5/16"-30 to 170NoBlack—1009600K38000000000000000
    5/16"3/64"13/64"7/16"15/64"-30 to 170NoBlack—509600K108000000000000000
    5/16"1/16"3/16"13/32"7/32"-30 to 170NoBlack—1009600K1300000000000000
    5/16"1/16"3/16"1/2"1/4"-30 to 170NoBlack—1009600K39000000000000000
    11/32"1/32"1/4"1/2"5/32"-30 to 170NoBlack—1009600K14000000000000000
    11/32"1/16"1/4"1/2"3/16"-30 to 170NoBlack—1009600K24000000000000000
    11/32"3/32"3/16"5/8"3/8"-30 to 170NoBlack—259600K2110000000000000
    3/8"1/16"5/32"1/2"7/32"-30 to 170NoBlack—1009600K41000000000000000
    3/8"1/16"1/4"1/2"3/16"-30 to 170NoBlack—1009600K25000000000000000
    3/8"1/16"1/4"5/8"11/32"-30 to 170NoBlack—1009600K28000000000000000
    3/8"1/16"9/32"9/16"1/4"-30 to 170NoBlack—1009600K15000000000000000
    3/8"1/16"9/32"19/32"13/64"-30 to 170NoBlack—1009600K42000000000000000
    3/8"3/16"3/16"5/8"3/8"-30 to 170NoBlack—259600K84000000000000000
    13/32"1/8"17/64"5/8"3/8"-30 to 170NoBlack—1009600K26000000000000000
    27/64"1/16"5/16"5/8"1/4"-30 to 170NoBlack—509600K76000000000000000
    7/16"3/64"3/32"5/8"13/64"-30 to 170NoBlack—259600K111000000000000000
    7/16"1/16"9/32"5/8"1/4"-30 to 170NoBlack—1009600K16000000000000000
    7/16"3/32"3/8"5/8"9/32"-30 to 170NoBlack—1009600K33000000000000000
    7/16"1/8"3/16"9/16"3/8"-30 to 170NoBlack—1009600K45000000000000000
    15/32"1/16"9/32"37/64"5/16"-30 to 170NoBlack—509600K82000000000000000
    15/32"1/16"5/16"9/16"3/16"-30 to 170NoBlack—509600K83000000000000000
    1/2"1/16"5/32"11/16"9/32"-30 to 170NoBlack—1009600K27000000000000000
    1/2"1/16"5/16"5/8"1/4"-30 to 170NoBlack—1009600K31000000000000000
    1/2"1/16"3/8"5/8"1/4"-30 to 170NoBlack—1009600K32000000000000000
    1/2"1/16"13/32"11/16"1/4"-30 to 170NoBlack—1009600K18000000000000000
    1/2"3/32"3/8"13/16"3/8"-30 to 170NoBlack—1009600K34000000000000000
    1/2"1/4"5/16"11/16"7/16"-30 to 170NoBlack—509600K5400000000000000
    17/32"1/16"5/16"3/4"7/16"-30 to 170NoBlack—259600K21400000000000000
    17/32"3/16"5/16"3/4"9/16"-30 to 170NoBlack—109600K213000000000000
    9/16"1/16"7/16"3/4"1/4"-30 to 170NoBlack—1009600K19000000000000000
    9/16"1/8"7/16"3/4"3/8"-30 to 170NoBlack—109600K86000000000000000
    9/16"1/2"3/8"3/4"3/4"-30 to 170NoBlack—109600K88000000000000000
    19/32"3/64"7/16"3/4"3/8"-30 to 170NoBlack—259600K215000000000000000
    5/8"1/16"3/8"7/8"11/32"-30 to 170NoBlack—509600K46000000000000000
    5/8"1/8"3/8"7/8"13/32"-30 to 170NoBlack—509600K47000000000000000
    21/32"1/16"3/16"27/32"5/16"-30 to 170NoBlack—109600K212000000000000
    11/16"1/32"3/16"7/8"7/32"-30 to 170NoBlack—259600K116000000000000000
    11/16"1/16"1/2"15/16"3/8"-30 to 170NoBlack—59600K115000000000000
    3/4"1/16"9/16"1"5/16"-30 to 170NoBlack—509600K21000000000000000
    3/4"3/32"1/2"1"9/32"-30 to 170NoBlack—509600K22000000000000000
    3/4"1/8"5/16"1"3/8"-30 to 170NoBlack—109600K97000000000000000
    13/16"1/16"11/16"1 1/16"1/4"-30 to 170NoBlack—109600K11700000000000000
    7/8"1/16"5/8"1 1/8"5/16"-30 to 170NoBlack—509600K36000000000000000
    7/8"1/16"3/4"1 1/8"5/16"-30 to 170NoBlack—109600K96000000000000000
    7/8"3/32"9/32"1 1/8"11/32"-30 to 170NoBlack—509600K48000000000000000
    7/8"3/32"5/8"1 1/8"11/32"-30 to 170NoBlack—259600K950000000000000
    7/8"3/32"3/4"1 1/8"11/32"-30 to 170NoBlack—109600K94000000000000
    7/8"1/8"9/32"1 1/8"3/8"-30 to 170NoBlack—259600K93000000000000000
    7/8"1/8"5/8"1 1/8"3/8"-30 to 170NoBlack—509600K37000000000000000
    7/8"1/8"3/4"1 1/8"3/8"-30 to 170NoBlack—259600K92000000000000000
    15/16"3/64"25/32"1 5/32"1/4"-30 to 170NoBlack—109600K216000000000000
    15/16"3/32"9/32"1 1/8"11/32"-30 to 170NoBlack—259600K91000000000000000
    15/16"3/32"5/8"1 1/8"11/32"-30 to 170NoBlack—259600K98000000000000000
    15/16"3/32"3/4"1 1/8"11/32"-30 to 170NoBlack—259600K7100000000000000
    1"1/16"7/8"1 3/16"3/16"-30 to 170NoBlack—109600K89000000000000000
    1"5/64"11/16"1 5/16"3/8"-30 to 170NoBlack—259600K55000000000000000
    1 1/16"1/16"1/4"1 5/16"5/16"-30 to 170NoBlack—109600K118000000000000000
    1 1/16"3/32"23/32"1 9/32"3/8"-30 to 170NoBlack—259600K56000000000000000
    1 3/32"1/16"3/4"1 5/8"5/16"-30 to 170NoBlack—59600K57000000000000000
    1 1/8"3/32"3/4"1 1/2"5/16"-30 to 170NoBlack—259600K49000000000000000
    1 3/16"1/16"27/32"1 7/16"1/4"-30 to 170NoBlack—109600K119000000000000000
    1 1/4"1/16"7/8"1 5/8"7/16"-30 to 170NoBlack—259600K58000000000000000
    1 3/8"1/16"1"1 3/4"7/16"-30 to 170NoBlack—109600K217000000000000
    1 3/8"3/32"1"1 3/4"3/8"-30 to 170NoBlack—259600K59000000000000000
    1 3/8"7/64"1"1 3/4"13/32"-30 to 170NoBlack—109600K5100000000000000
    1 3/8"1/8"1"1 3/4"1/2"-30 to 170NoBlack—109600K218000000000000
    1 3/8"3/16"1"1 3/4"9/16"-30 to 170NoBlack—109600K2190000000000000
    1 3/8"1/4"1"1 3/4"5/8"-30 to 170NoBlack—109600K2210000000000000
    1 7/16"1/8"3/4"1 13/16"7/16"-30 to 170NoBlack—109600K122000000000000000
    1 7/16"1/4"3/4"1 13/16"9/16"-30 to 170NoBlack—59600K121000000000000000
    1 1/2"1/16"1 1/4"1 7/8"11/32"-30 to 170NoBlack—109600K6100000000000000
    1 1/2"3/32"1 1/4"1 7/8"3/8"-30 to 170NoBlack—259600K52000000000000000
    1 1/2"1/8"1 1/4"1 7/8"13/32"-30 to 170NoBlack—109600K72000000000000000
    1 9/16"1/4"1 5/16"1 3/4"1/2"-30 to 170NoBlack—59600K123000000000000000
    1 5/8"1/16"7/8"2"7/16"-30 to 170NoBlack—19600K222000000000000
    1 5/8"1/16"1 1/4"1 7/8"3/8"-30 to 170NoBlack—19600K224000000000000
    1 5/8"1/8"7/8"2"1/2"-30 to 170NoBlack—19600K223000000000000
    1 3/4"1/16"1 1/2"2 1/8"7/16"-30 to 170NoBlack—109600K225000000000000
    1 3/4"3/32"1 1/4"2 1/8"3/8"-30 to 170NoBlack—109600K62000000000000000
    1 3/4"1/8"1 1/2"2 1/8"1/2"-30 to 170NoBlack—109600K226000000000000
    1 3/4"3/16"1 1/2"2 1/8"9/16"-30 to 170NoBlack—109600K227000000000000
    1 3/4"1/4"1 1/2"2"1/2"-30 to 170NoBlack—59600K12400000000000000
    1 3/4"1/4"1 1/2"2 1/8"5/8"-30 to 170NoBlack—109600K228000000000000
    1 7/8"1/16"1"2 1/4"7/16"-30 to 170NoBlack—59600K231000000000000000
    1 7/8"1/8"1"2 1/4"1/2"-30 to 170NoBlack—19600K232000000000000
    1 7/8"3/16"1"2 1/4"9/16"-30 to 170NoBlack—19600K233000000000000
    2"1/16"1 5/8"2 1/4"5/16"-30 to 170NoBlack—109600K126000000000000000
    2"3/32"1 1/2"2 3/8"3/8"-30 to 170NoBlack—109600K63000000000000000
    2"1/4"1 3/4"2 1/2"1/2"-30 to 170NoBlack—59600K125000000000000000
    2 13/64"1/16"1 55/64"2 5/8"7/16"-30 to 170NoBlack—59600K99000000000000000
    2 1/4"1/8"2"2 5/8"3/8"-30 to 170NoBlack—19600K127000000000000
    2 3/8"1/8"1 1/4"2 3/4"1/2"-30 to 170NoBlack—19600K2340000000000000
    2 1/2"1/8"1 1/4"2 7/8"1/2"-30 to 170NoBlack—19600K23500000000000000
    2 3/4"1/16"1 1/2"3 1/4"7/16"-30 to 170NoBlack—19600K236000000000000000
    3 1/4"1/8"3"3 5/8"3/8"-30 to 170NoBlack—59600K12800000000000000
    3 1/2"3/16"2"4"5/8"-30 to 170NoBlack—19600K129000000000000000
     
    Oil-Resistant Buna-N
    3/16"1/16"1/8"5/16"3/16"0 to 250NoBlackMIL-G-3036, MS35489-140 NASM3036109307K154000000000000
    1/4"1/16"1/8"11/32"3/16"0 to 250NoBlackAN931-210, MIL-G-3036, MS35489-1 NASM30361009307K350000000000000
    1/4"3/32"1/8"11/32"7/32"0 to 250NoBlackMIL-G-3036, MS35489-142 NASM3036109307K156000000000000000
    9/32"3/32"3/16"7/16"7/32"0 to 250NoBlackMIL-G-3036 NASM3036109307K211000000000000
    5/16"1/16"3/16"7/16"3/16"0 to 250NoBlackAN931-3-5, MIL-G-3036, MS35489-4 NASM3036509307K11000000000000
    5/16"3/32"3/16"7/16"3/16"0 to 250NoBlackMIL-G-3036, MS35489-144 NASM3036109307K158000000000000000
    5/16"1/8"3/16"7/16"1/4"0 to 250NoBlackAN931-A3-5, MIL-G-3036, MS35489-33 NASM3036509307K12000000000000
    5/16"3/16"3/16"7/16"5/16"0 to 250NoBlackAN931-B3-5, MIL-G-3036, MS35489-62 NASM3036109307K866000000000000
    5/16"1/4"3/16"7/16"3/8"0 to 250NoBlackAN931-C3-5, MIL-G-3036, MS35489-91 NASM3036509307K37000000000000
    11/32"1/16"1/4"1/2"3/16"0 to 250NoBlackMIL-G-3036 NASM3036109307K212000000000000
    3/8"3/64"1/4"1/2"11/64"0 to 250NoBlackMIL-G-3036 NASM3036109307K213000000000000
    3/8"1/16"9/32"9/16"1/4"0 to 250NoBlackMIL-G-3036 NASM3036109307K214000000000000
    3/8"3/32"1/8"1/2"5/16"0 to 250NoBlackMIL-G-3036, MS35489-143 NASM303659307K1570000000000000
    13/32"1/16"9/32"9/16"1/4"0 to 250NoBlackMIL-G-3036 NASM3036109307K2150000000000000
    7/16"1/16"1/4"5/8"3/16"0 to 250NoBlackAN931-4-7, MIL-G-3036, MS35489-6 NASM3036509307K13000000000000
    7/16"3/32"1/4"9/16"7/32"0 to 250NoBlackMIL-G-3036, MS35489-146 NASM303659307K1810000000000000
    7/16"1/8"1/4"5/8"1/4"0 to 250NoBlackAN931-A4-7, MIL-G-3036, MS35489-35 NASM3036509307K14000000000000
    7/16"3/16"1/4"5/8"5/16"0 to 250NoBlackAN931-B4-7, MIL-G-3036, MS35489-64 NASM3036509307K38000000000000
    7/16"1/4"1/4"5/8"3/8"0 to 250NoBlackAN931-C4-7, MIL-G-3036, MS35489-93 NASM3036509307K39000000000000
    15/32"3/32"5/16"3/4"11/32"0 to 250NoBlackMIL-G-3036 NASM303659307K2160000000000000
    1/2"1/16"3/8"21/32"1/4"0 to 250NoBlackMIL-G-3036, MS35489-141 NASM3036109307K15500000000000000
    1/2"1/16"3/8"11/16"9/32"0 to 250NoBlackAN930-1, MIL-G-3036 NASM3036509307K21000000000000
    1/2"3/32"3/8"41/64"1/4"0 to 250NoBlackMIL-G-3036, MS35489-147 NASM3036109307K16200000000000000
    9/16"1/16"1/8"3/4"3/16"0 to 250NoBlackAN931-2-9, MIL-G-3036, MS35489-2 NASM3036259307K4100000000000000
    9/16"1/16"3/16"3/4"3/16"0 to 250NoBlackAN931-3-9, MIL-G-3036, MS35489-134 NASM3036509307K430000000000000
    9/16"1/16"5/16"13/16"5/16"0 to 250NoBlackAN931-5-9, MIL-G-3036, MS35489-9 NASM3036509307K160000000000000
    9/16"1/16"3/8"3/4"3/8"0 to 250NoBlackAN930-2, MIL-G-3036 NASM3036509307K4800000000000000
    9/16"3/32"3/16"3/4"15/32"0 to 250NoBlackMIL-G-3036, MS35489-145 NASM303659307K1590000000000000
    9/16"1/8"1/8"3/4"1/4"0 to 250NoBlackAN931-A2-9, MIL-G-3036, MS35489-31 NASM3036109307K863000000000000
    9/16"1/8"3/16"3/4"1/4"0 to 250NoBlackAN931-A3-9, MIL-G-3036, MS35489-137 NASM3036109307K867000000000000
    9/16"1/8"5/16"13/16"3/8"0 to 250NoBlackAN931-A5-9, MIL-G-3036, MS35489-38 NASM3036509307K17000000000000
    9/16"3/16"1/8"3/4"5/16"0 to 250NoBlackAN931-B2-9, MIL-G-3036, MS35489-60 NASM3036109307K118000000000000000
    9/16"3/16"3/16"3/4"5/16"0 to 250NoBlackAN931-B3-9, MIL-G-3036, MS35489-138 NASM3036109307K1520000000000000
    9/16"3/16"5/16"13/16"7/16"0 to 250NoBlackAN931-B5-9, MIL-G-3036, MS35489-67 NASM3036509307K18000000000000
    9/16"1/4"1/8"3/4"3/8"0 to 250NoBlackAN931-C2-9, MIL-G-3036, MS35489-89 NASM3036109307K131000000000000000
    9/16"1/4"3/16"3/4"3/8"0 to 250NoBlackAN931-C3-9, MIL-G-3036, MS35489-139 NASM3036109307K15300000000000000
    9/16"1/4"5/16"13/16"1/2"0 to 250NoBlackAN931-C5-9, MIL-G-3036, MS35489-96 NASM3036509307K91000000000000
    9/16"3/8"3/8"3/4"3/4"0 to 250NoBlackAN930-3, MIL-G-3036 NASM3036259307K490000000000000
    5/8"1/16"3/16"7/8"3/16"0 to 250NoBlackAN931-3-10, MIL-G-3036, MS35489-5 NASM3036259307K4400000000000000
    5/8"1/16"3/8"7/8"5/16"0 to 250NoBlackAN931-6-10, MIL-G-3036, MS35489-11 NASM3036509307K220000000000000
    5/8"1/8"3/16"7/8"1/4"0 to 250NoBlackAN931-A3-10, MIL-G-3036, MS35489-34 NASM3036109307K865000000000000
    5/8"1/8"3/8"7/8"3/8"0 to 250NoBlackAN931-A6-10, MIL-G-3036, MS35489-40 NASM3036509307K23000000000000
    5/8"3/16"3/16"7/8"5/16"0 to 250NoBlackAN931-B3-10, MIL-G-3036, MS35489-63 NASM3036259307K360000000000000
    5/8"3/16"3/8"7/8"7/16"0 to 250NoBlackAN931-B6-10, MIL-G-3036, MS35489-69 NASM3036509307K590000000000000
    5/8"1/4"3/16"7/8"3/8"0 to 250NoBlackAN931-C3-10, MIL-G-3036, MS35489-92 NASM303659307K13300000000000000
    5/8"1/4"3/8"7/8"1/2"0 to 250NoBlackAN931-C6-10, MIL-G-3036, MS35489-98 NASM3036109307K876000000000000
    11/16"1/16"7/16"15/16"5/16"0 to 250NoBlackAN931-7-11, MIL-G-3036, MS35489-13 NASM3036509307K250000000000000
    11/16"1/8"7/16"15/16"3/8"0 to 250NoBlackAN931-A7-11, MIL-G-3036, MS35489-42 NASM3036109307K882000000000000
    11/16"3/16"7/16"15/16"7/16"0 to 250NoBlackAN931-B7-11, MIL-G-3036, MS35489-71 NASM3036109307K883000000000000
    11/16"1/4"7/16"15/16"1/2"0 to 250NoBlackAN931-C7-11, MIL-G-3036, MS35489-100 NASM3036109307K884000000000000
    3/4"1/16"1/4"1"1/4"0 to 250NoBlackAN931-4-12, MIL-G-3036, MS35489-7 NASM3036259307K6400000000000000
    3/4"1/16"5/16"1"5/16"0 to 250NoBlackAN931-5-12, MIL-G-3036, MS35489-10 NASM3036259307K7700000000000000
    3/4"1/16"1/2"1"1/4"0 to 250NoBlackAN930-41, MIL-G-3036, MS35489-149 NASM3036109307K164000000000000
    3/4"3/32"1/2"1"9/32"0 to 250NoBlackAN930-4, MIL-G-3036, MS35489-150 NASM3036259307K850000000000000
    3/4"1/8"1/4"1"5/16"0 to 250NoBlackAN931-A4-12, MIL-G-3036, MS35489-36 NASM3036109307K868000000000000
    3/4"1/8"5/16"1"3/8"0 to 250NoBlackAN931-A5-12, MIL-G-3036, MS35489-39 NASM3036259307K4200000000000000
    3/4"3/16"1/4"1"3/8"0 to 250NoBlackAN931-B4-12, MIL-G-3036, MS35489-65 NASM3036109307K86900000000000000
    3/4"3/16"5/16"1"7/16"0 to 250NoBlackAN931-B5-12, MIL-G-3036, MS35489-68 NASM3036259307K5800000000000000
    3/4"1/4"1/4"1"7/16"0 to 250NoBlackAN931-C4-12, MIL-G-3036, MS35489-94 NASM3036109307K87100000000000000
    3/4"1/4"5/16"1"1/2"0 to 250NoBlackAN931-C5-12, MIL-G-3036, MS35489-97 NASM3036109307K874000000000000
    13/16"1/16"5/16"1 1/16"5/16"0 to 250NoBlackAN931-5-13, MIL-G-3036, MS35489-118 NASM3036259307K78000000000000000
    13/16"1/16"1/2"1 1/16"5/16"0 to 250NoBlackAN931-8-13, MIL-G-3036, MS35489-14 NASM3036509307K260000000000000
    13/16"1/16"9/16"1 1/16"5/16"0 to 250NoBlackAN931-9-13, MIL-G-3036, MS35489-16 NASM3036259307K5200000000000000
    13/16"1/8"5/16"1 1/16"3/8"0 to 250NoBlackAN931-A5-13, MIL-G-3036, MS35489-122 NASM3036109307K8750000000000000
    13/16"1/8"1/2"1 1/16"3/8"0 to 250NoBlackAN931-A8-13, MIL-G-3036, MS35489-43 NASM3036509307K2700000000000000
    13/16"1/8"9/16"1 1/16"3/8"0 to 250NoBlackAN931-A9-13, MIL-G-3036, MS35489-45 NASM3036109307K8880000000000000
    13/16"3/16"1/2"1 1/16"7/16"0 to 250NoBlackAN931-B8-13, MIL-G-3036, MS35489-72 NASM3036509307K620000000000000
    13/16"3/16"9/16"1 1/16"7/16"0 to 250NoBlackAN931-B9-13, MIL-G-3036, MS35489-74 NASM3036109307K889000000000000
    13/16"1/4"5/16"1 1/16"1/2"0 to 250NoBlackAN931-C5-13, MIL-G-3036, MS35489-130 NASM303659307K14700000000000000
    13/16"1/4"1/2"1 1/16"1/2"0 to 250NoBlackAN931-C8-13, MIL-G-3036, MS35489-101 NASM3036509307K630000000000000
    13/16"1/4"9/16"1 1/16"1/2"0 to 250NoBlackAN931-C9-13, MIL-G-3036, MS35489-103 NASM3036109307K135000000000000
    7/8"1/16"5/8"1 1/8"5/16"0 to 250NoBlackAN931-10-14, MIL-G-3036, MS35489-17 NASM3036109307K53000000000000
    7/8"3/32"5/8"1 1/8"11/32"0 to 250NoBlackMIL-G-3036, MS35489-151 NASM303659307K16600000000000000
    7/8"1/8"5/8"1 1/8"3/8"0 to 250NoBlackAN931-A10-14, MIL-G-3036, MS35489-46 NASM3036109307K65000000000000
    7/8"3/16"5/8"1 1/8"7/16"0 to 250NoBlackAN931-B10-14, MIL-G-3036, MS35489-75 NASM3036109307K66000000000000
    7/8"1/4"5/8"1 1/8"1/2"0 to 250NoBlackAN931-C10-14, MIL-G-3036, MS35489-104 NASM3036109307K67000000000000
    31/32"3/32"5/8"1 1/4"7/16"0 to 250NoBlackMIL-G-3036, MS35489-152 NASM303659307K167000000000000000
    1"1/16"1/8"1 1/4"1/4"0 to 250NoBlackAN931-2-16, MIL-G-3036, MS35489-3 NASM3036109307K861000000000000000
    1"1/16"1/4"1 1/4"1/4"0 to 250NoBlackAN931-4-16, MIL-G-3036, MS35489-8 NASM3036259307K76000000000000
    1"1/16"3/8"1 1/4"1/4"0 to 250NoBlackAN931-6-16, MIL-G-3036, MS35489-12 NASM3036509307K2400000000000000
    1"1/16"11/16"1 5/16"3/8"0 to 250NoBlackAN931-11-16, MIL-G-3036, MS35489-19 NASM3036109307K8930000000000000
    1"3/32"3/8"1 1/4"9/32"0 to 250NoBlackMIL-G-3036, MS35489-148 NASM303659307K163000000000000000
    1"3/32"11/16"1 5/16"13/32"0 to 250NoBlackMIL-G-3036, MS35489-153 NASM303659307K1680000000000000
    1"1/8"1/8"1 1/4"5/16"0 to 250NoBlackAN931-A2-16, MIL-G-3036, MS35489-32 NASM3036109307K862000000000000000
    1"1/8"1/4"1 1/4"5/16"0 to 250NoBlackAN931-A4-16, MIL-G-3036, MS35489-37 NASM3036109307K872000000000000000
    1"1/8"3/8"1 1/4"5/16"0 to 250NoBlackAN931-A6-16, MIL-G-3036, MS35489-41 NASM3036109307K8770000000000000
    1"1/8"11/16"1 5/16"7/16"0 to 250NoBlackAN931-A11-16, MIL-G-3036, MS35489-48 NASM3036259307K790000000000000
    1"3/16"1/8"1 1/4"3/8"0 to 250NoBlackAN931-B2-16, MIL-G-3036, MS35489-61 NASM3036109307K119000000000000000
    1"3/16"1/4"1 1/4"3/8"0 to 250NoBlackAN931-B4-16, MIL-G-3036, MS35489-66 NASM3036109307K873000000000000000
    1"3/16"3/8"1 1/4"3/8"0 to 250NoBlackAN931-B6-16, MIL-G-3036, MS35489-70 NASM3036109307K121000000000000000
    1"3/16"11/16"1 5/16"1/2"0 to 250NoBlackAN931-B11-16, MIL-G-3036, MS35489-77 NASM3036259307K68000000000000
    1"1/4"1/8"1 1/4"7/16"0 to 250NoBlackAN931-C2-16, MIL-G-3036, MS35489-90 NASM303659307K132000000000000000
    1"1/4"3/8"1 1/4"7/16"0 to 250NoBlackAN931-C6-16, MIL-G-3036, MS35489-99 NASM3036109307K878000000000000000
    1"1/4"11/16"1 5/16"9/16"0 to 250NoBlackAN931-C11-16, MIL-G-3036, MS35489-106 NASM3036259307K690000000000000
    1 1/16"1/16"3/4"1 3/8"3/8"0 to 250NoBlackAN931-12-17, MIL-G-3036, MS35489-20 NASM3036259307K810000000000000
    1 1/16"3/32"7/8"1 3/8"5/16"0 to 250NoBlackMIL-G-3036, MS35489-154 NASM303659307K169000000000000000
    1 1/16"1/8"3/4"1 3/8"7/16"0 to 250NoBlackAN931-A12-17, MIL-G-3036, MS35489-49 NASM3036259307K82000000000000
    1 1/16"3/16"3/4"1 3/8"1/2"0 to 250NoBlackAN931-B12-17, MIL-G-3036, MS35489-78 NASM3036109307K123000000000000000
    1 1/16"1/4"3/4"1 3/8"9/16"0 to 250NoBlackAN931-C12-17, MIL-G-3036, MS35489-107 NASM3036259307K710000000000000
    1 1/8"3/32"7/8"1 1/2"11/32"0 to 250NoBlackMIL-G-3036, MS35489-155 NASM303659307K17100000000000000
    1 1/4"1/16"1/2"1 1/2"1/4"0 to 250NoBlackAN931-8-20, MIL-G-3036, MS35489-15 NASM3036509307K2800000000000000
    1 1/4"1/16"5/8"1 1/2"1/4"0 to 250NoBlackAN931-10-20, MIL-G-3036, MS35489-18 NASM3036109307K86000000000000
    1 1/4"1/16"3/4"1 5/8"1/4"0 to 250NoBlackAN931-12-20, MIL-G-3036, MS35489-135 NASM3036109307K550000000000000
    1 1/4"1/16"7/8"1 5/8"7/16"0 to 250NoBlackAN931-14-20, MIL-G-3036, MS35489-22 NASM3036259307K8300000000000000
    1 1/4"1/8"1/2"1 1/2"5/16"0 to 250NoBlackAN931-A8-20, MIL-G-3036, MS35489-44 NASM3036109307K88500000000000000
    1 1/4"1/8"5/8"1 1/2"5/16"0 to 250NoBlackAN931-A10-20, MIL-G-3036, MS35489-47 NASM3036109307K892000000000000000
    1 1/4"1/8"3/4"1 5/8"5/16"0 to 250NoBlackAN931-A12-20, MIL-G-3036, MS35489-123 NASM3036109307K895000000000000000
    1 1/4"1/8"7/8"1 5/8"1/2"0 to 250NoBlackAN931-A14-20, MIL-G-3036, MS35489-51 NASM3036259307K7200000000000000
    1 1/4"3/16"1/2"1 1/2"3/8"0 to 250NoBlackAN931-B8-20, MIL-G-3036, MS35489-73 NASM303659307K886000000000000
    1 1/4"3/16"5/8"1 1/2"3/8"0 to 250NoBlackAN931-B10-20, MIL-G-3036, MS35489-76 NASM3036109307K122000000000000000
    1 1/4"3/16"3/4"1 5/8"3/8"0 to 250NoBlackAN931-B12-20, MIL-G-3036, MS35489-127 NASM303659307K143000000000000000
    1 1/4"3/16"7/8"1 5/8"9/16"0 to 250NoBlackAN931-B14-20, MIL-G-3036, MS35489-80 NASM3036259307K7300000000000000
    1 1/4"1/4"1/2"1 1/2"7/16"0 to 250NoBlackAN931-C8-20, MIL-G-3036, MS35489-102 NASM303659307K8870000000000000
    1 1/4"1/4"5/8"1 1/2"7/16"0 to 250NoBlackAN931-C10-20, MIL-G-3036, MS35489-105 NASM3036109307K136000000000000000
    1 1/4"1/4"3/4"1 5/8"7/16"0 to 250NoBlackAN931-C12-20, MIL-G-3036, MS35489-131 NASM3036109307K148000000000000000
    1 1/4"1/4"7/8"1 5/8"5/8"0 to 250NoBlackAN931-C14-20, MIL-G-3036, MS35489-109 NASM303659307K899000000000000
    1 3/8"1/16"1"1 3/4"7/16"0 to 250NoBlackAN931-16-22, MIL-G-3036, MS35489-23 NASM3036109307K610000000000000
    1 3/8"3/32"1"1 3/4"3/8"0 to 250NoBlackMIL-G-3036, MS35489-156 NASM303659307K172000000000000000
    1 3/8"1/8"1"1 3/4"1/2"0 to 250NoBlackAN931-A16-22, MIL-G-3036, MS35489-52 NASM3036109307K740000000000000
    1 3/8"3/16"1"1 3/4"9/16"0 to 250NoBlackAN931-B16-22, MIL-G-3036, MS35489-81 NASM303659307K912000000000000
    1 3/8"1/4"1"1 3/4"5/8"0 to 250NoBlackAN931-C16-22, MIL-G-3036, MS35489-110 NASM303659307K91400000000000000
    1 7/16"1/16"3/4"1 13/16"3/8"0 to 250NoBlackAN931-12-23, MIL-G-3036, MS35489-21 NASM303659307K56000000000000000
    1 7/16"1/8"3/4"1 13/16"7/16"0 to 250NoBlackAN931-A12-23, MIL-G-3036, MS35489-50 NASM303659307K89600000000000000
    1 7/16"3/16"3/4"1 13/16"1/2"0 to 250NoBlackAN931-B12-23, MIL-G-3036, MS35489-79 NASM303659307K124000000000000000
    1 7/16"1/4"3/4"1 13/16"9/16"0 to 250NoBlackAN931-C12-23, MIL-G-3036, MS35489-108 NASM303659307K897000000000000000
    1 1/2"1/16"1 1/8"1 7/8"3/8"0 to 250NoBlackMIL-G-3036 NASM303659307K217000000000000000
    1 5/8"1/16"3/4"2"3/8"0 to 250NoBlackAN931-12-26, MIL-G-3036, MS35489-120 NASM303659307K57000000000000
    1 5/8"1/8"3/4"2"7/16"0 to 250NoBlackAN931-A12-26, MIL-G-3036, MS35489-124 NASM303659307K898000000000000000
    1 5/8"1/8"7/8"2"1/2"0 to 250NoBlackAN931-A14-26, MIL-G-3036, MS35489-125 NASM303619307K911000000000000
    1 5/8"3/16"3/4"2"1/2"0 to 250NoBlackAN931-B12-26, MIL-G-3036, MS35489-128 NASM303629307K14500000000000000
    1 5/8"3/16"7/8"2"9/16"0 to 250NoBlackAN931-B14-26, MIL-G-3036, MS35489-129 NASM303629307K146000000000000000
    1 5/8"1/4"3/4"2"9/16"0 to 250NoBlackAN931-C12-26, MIL-G-3036, MS35489-132 NASM303629307K149000000000000000
    1 5/8"1/4"7/8"2"5/8"0 to 250NoBlackAN931-C14-26, MIL-G-3036, MS35489-133 NASM303629307K151000000000000000
    1 3/4"1/16"1 1/2"2 1/8"7/16"0 to 250NoBlackAN931-24-28, MIL-G-3036, MS35489-27 NASM3036259307K84000000000000000
    1 3/4"1/8"1 1/2"2 1/8"1/2"0 to 250NoBlackAN931-A24-28, MIL-G-3036, MS35489-56 NASM3036109307K75000000000000
    1 3/4"3/16"1 1/2"2 1/8"9/16"0 to 250NoBlackAN931-B24-28, MIL-G-3036, MS35489-85 NASM303629307K922000000000000
    1 3/4"1/4"1 1/2"2 1/8"5/8"0 to 250NoBlackAN931-C24-28, MIL-G-3036, MS35489-114 NASM303629307K923000000000000
    1 7/8"1/16"1"2 1/4"7/16"0 to 250NoBlackAN931-16-30, MIL-G-3036, MS35489-24 NASM303629307K915000000000000
    1 7/8"1/8"1"2 1/4"1/2"0 to 250NoBlackAN931-A16-30, MIL-G-3036, MS35489-53 NASM303629307K916000000000000
    1 7/8"3/16"1"2 1/4"9/16"0 to 250NoBlackAN931-B16-30, MIL-G-3036, MS35489-82 NASM303629307K917000000000000
    1 7/8"1/4"1"2 1/4"5/8"0 to 250NoBlackAN931-C16-30, MIL-G-3036, MS35489-111 NASM303659307K137000000000000000
    2 3/8"1/16"1 1/4"2 3/4"7/16"0 to 250NoBlackAN931-20-38, MIL-G-3036, MS35489-25 NASM303629307K111000000000000000
    2 3/8"1/8"1 1/4"2 3/4"1/2"0 to 250NoBlackAN931-A20-38, MIL-G-3036, MS35489-54 NASM303629307K918000000000000000
    2 3/8"3/16"1 1/4"2 3/4"9/16"0 to 250NoBlackAN931-B20-38, MIL-G-3036, MS35489-83 NASM303629307K125000000000000000
    2 3/8"1/4"1 1/4"2 3/4"5/8"0 to 250NoBlackAN931-C20-38, MIL-G-3036, MS35489-112 NASM303629307K138000000000000000
    2 1/2"1/16"1 1/4"2 7/8"7/16"0 to 250NoBlackAN931-20-40, MIL-G-3036, MS35489-26 NASM303629307K112000000000000000
    2 1/2"1/8"1 1/4"2 7/8"1/2"0 to 250NoBlackAN931-A20-40, MIL-G-3036, MS35489-55 NASM303629307K919000000000000000
    2 1/2"3/16"1 1/4"2 7/8"7/16"0 to 250NoBlackAN931-B20-40, MIL-G-3036, MS35489-84 NASM303629307K126000000000000000
    2 1/2"1/4"1 1/4"2 7/8"5/8"0 to 250NoBlackAN931-C20-40, MIL-G-3036, MS35489-113 NASM303629307K921000000000000000
    2 3/4"1/16"1 1/2"3 1/4"7/16"0 to 250NoBlackAN931-24-44, MIL-G-3036, MS35489-28 NASM303629307K924000000000000000
    2 3/4"1/8"1 1/2"3 1/4"1/2"0 to 250NoBlackAN931-A24-44, MIL-G-3036, MS35489-57 NASM303619307K1150000000000000
    2 3/4"3/16"1 1/2"3 1/4"9/16"0 to 250NoBlackAN931-B24-44, MIL-G-3036, MS35489-86 NASM303629307K127000000000000000
    2 3/4"1/4"1 1/2"3 1/4"5/8"0 to 250NoBlackAN931-C24-44, MIL-G-3036, MS35489-115 NASM303629307K139000000000000000
    3 1/4"1/16"1 3/4"3 3/4"1/2"0 to 250NoBlackAN931-28-52, MIL-G-3036, MS35489-29 NASM303619307K113000000000000000
    3 1/4"1/8"1 3/4"3 3/4"9/16"0 to 250NoBlackAN931-A28-52, MIL-G-3036, MS35489-58 NASM303619307K116000000000000000
    3 1/4"3/16"1 3/4"3 3/4"5/8"0 to 250NoBlackAN931-B28-52, MIL-G-3036, MS35489-87 NASM303619307K128000000000000000
    3 1/4"1/4"1 3/4"3 3/4"11/16"0 to 250NoBlackAN931-C28-52, MIL-G-3036, MS35489-116 NASM303619307K141000000000000000
    3 1/2"1/16"2"4"1/2"0 to 250NoBlackAN931-32-56, MIL-G-3036, MS35489-30 NASM303619307K114000000000000000
    3 1/2"1/8"2"4"9/16"0 to 250NoBlackAN931-A32-56, MIL-G-3036, MS35489-59 NASM303619307K117000000000000000
    3 1/2"3/16"2"4"5/8"0 to 250NoBlackAN931-B32-56, MIL-G-3036, MS35489-88 NASM303619307K129000000000000000
    3 1/2"1/4"2"4"11/16"0 to 250NoBlackAN931-C32-56, MIL-G-3036, MS35489-117 NASM303619307K142000000000000000
     
    High-Temperature Silicone Rubber
    3/16"1/16"1/8"5/16"3/16"-60 to 500YesRedAN931-2113-715, MIL-G-3036, MS35489-140X NASM3036251061T167000000000000
    1/4"1/16"1/8"11/32"3/16"-60 to 500YesRedAN931-210, MIL-G-3036, MS35489-1X NASM3036251061T11000000000000
    5/16"1/16"3/16"7/16"3/16"-60 to 500YesRedAN931-3-5, MIL-G-3036, MS35489-4X NASM3036251061T12000000000000
    5/16"3/32"3/16"7/16"1/4"-60 to 500YesRedAN931-415-715, MIL-G-3036, MS35489-144X NASM3036101061T16800000000000000
    5/16"1/8"3/16"7/16"1/4"-60 to 500YesRedAN931-A3-5, MIL-G-3036, MS35489-33X NASM3036251061T24000000000000
    5/16"3/16"3/16"7/16"5/16"-60 to 500YesRedAN931-B3-5-715, MIL-G-3036, MS35489-62X NASM3036251061T111000000000000000
    5/16"1/4"3/16"7/16"3/8"-60 to 500YesRedAN931-C3-5, MIL-G-3036, MS35489-91X NASM3036101061T82000000000000
    7/16"1/16"1/4"5/8"3/16"-60 to 500YesRedAN931-4-7, MIL-G-3036, MS35489-6X NASM3036101061T13000000000000
    7/16"3/32"1/4"9/16"7/32"-60 to 500YesRedAN931-3425-715, MIL-G-3036, MS35489-146X NASM3036101061T1710000000000000
    7/16"1/8"1/4"5/8"1/4"-60 to 500YesRedAN931-A4-7, MIL-G-3036, MS35489-35X NASM3036101061T25000000000000
    7/16"3/16"1/4"5/8"5/16"-60 to 500YesRedAN931-B4-7, MIL-G-3036, MS35489-64X NASM3036101061T460000000000000
    7/16"1/4"1/4"5/8"3/8"-60 to 500YesRedAN931-C4-7, MIL-G-3036, MS35489-93X NASM3036101061T47000000000000
    1/2"1/16"3/8"11/16"9/32"-60 to 500YesRedAN930-1, MIL-G-3036 NASM3036101061T83000000000000
    1/2"3/32"3/8"41/64"1/4"-60 to 500YesRedAN931-3401-715, MIL-G-3036, MS35489-147X NASM3036101061T172000000000000000
    9/16"1/16"1/8"3/4"3/16"-60 to 500YesRedAN931-2-9, MIL-G-3036, MS35489-2X NASM3036101061T41000000000000000
    9/16"1/16"3/16"3/4"3/16"-60 to 500YesRedAN931-3-9, MIL-G-3036, MS35489-134X NASM3036101061T4400000000000000
    9/16"1/16"5/16"13/16"5/16"-60 to 500YesRedAN931-5-9, MIL-G-3036, MS35489-9X NASM3036101061T1500000000000000
    9/16"1/16"3/8"3/4"3/8"-60 to 500YesRedAN930-2, MIL-G-3036 NASM3036101061T840000000000000
    9/16"3/32"3/16"3/4"15/32"-60 to 500YesRedAN931-3417-715, MIL-G-3036, MS35489-145X NASM3036101061T169000000000000000
    9/16"1/8"1/8"3/4"1/4"-60 to 500YesRedAN931-A2-9-715, MIL-G-3036, MS35489-31X NASM3036101061T105000000000000000
    9/16"1/8"3/16"3/4"1/4"-60 to 500YesRedAN931-A3-9-715, MIL-G-3036, MS35489-137X NASM3036101061T112000000000000000
    9/16"1/8"5/16"13/16"3/8"-60 to 500YesRedAN931-A5-9, MIL-G-3036, MS35489-38X NASM3036101061T26000000000000000
    9/16"3/16"1/8"3/4"5/16"-60 to 500YesRedAN931-B2-9-715, MIL-G-3036, MS35489-60X NASM3036101061T106000000000000000
    9/16"3/16"3/16"3/4"5/16"-60 to 500YesRedAN931-B3-9-715, MIL-G-3036, MS35489-138X NASM303651061T113000000000000000
    9/16"3/16"5/16"13/16"7/16"-60 to 500YesRedAN931-B5-9, MIL-G-3036, MS35489-67X NASM3036101061T35000000000000000
    9/16"1/4"1/8"3/4"3/8"-60 to 500YesRedAN931-C2-9-715, MIL-G-3036, MS35489-89X NASM3036101061T107000000000000000
    9/16"1/4"5/16"13/16"1/2"-60 to 500YesRedAN931-C5-9, MIL-G-3036, MS35489-96X NASM3036101061T3700000000000000
    9/16"3/8"3/8"3/4"3/4"-60 to 500YesRedAN930-3, MIL-G-3036 NASM3036101061T85000000000000
    5/8"1/16"3/16"7/8"3/16"-60 to 500YesRedAN931-3-10, MIL-G-3036, MS35489-5X NASM3036101061T4200000000000000
    5/8"1/16"3/8"7/8"5/16"-60 to 500YesRedAN931-6-10, MIL-G-3036, MS35489-11X NASM3036101061T53000000000000000
    5/8"1/8"3/16"7/8"1/4"-60 to 500YesRedAN931-A3-10-715, MIL-G-3036, MS35489-34X NASM3036101061T108000000000000000
    5/8"1/8"3/8"7/8"3/8"-60 to 500YesRedAN931-A6-10, MIL-G-3036, MS35489-40X NASM303651061T27000000000000
    5/8"3/16"3/16"7/8"5/16"-60 to 500YesRedAN931-B3-10, MIL-G-3036, MS35489-63X NASM3036101061T43000000000000000
    5/8"3/16"3/8"7/8"7/16"-60 to 500YesRedAN931-B6-10, MIL-G-3036, MS35489-69X NASM303651061T36000000000000
    5/8"1/4"3/16"7/8"3/8"-60 to 500YesRedAN931-C3-10-715, MIL-G-3036, MS35489-92X NASM303651061T109000000000000000
    5/8"1/4"3/8"7/8"1/2"-60 to 500YesRedAN931-C6-10-715, MIL-G-3036, MS35489-98X NASM3036101061T127000000000000000
    11/16"1/16"7/16"15/16"5/16"-60 to 500YesRedAN931-7-11, MIL-G-3036, MS35489-13X NASM303651061T17000000000000
    11/16"1/8"7/16"15/16"3/8"-60 to 500YesRedAN931-A7-11-715, MIL-G-3036, MS35489-42X NASM3036101061T132000000000000000
    11/16"3/16"7/16"15/16"7/16"-60 to 500YesRedAN931-B7-11-715, MIL-G-3036, MS35489-71X NASM3036101061T133000000000000000
    11/16"1/4"7/16"15/16"1/2"-60 to 500YesRedAN931-C7-11-715, MIL-G-3036, MS35489-100X NASM3036101061T134000000000000000
    3/4"1/16"1/4"1"1/4"-60 to 500YesRedAN931-4-12, MIL-G-3036, MS35489-7X NASM3036101061T45000000000000000
    3/4"1/16"5/16"1"5/16"-60 to 500YesRedAN931-5-12, MIL-G-3036, MS35489-10X NASM3036101061T48000000000000000
    3/4"1/16"1/2"1"1/4"-60 to 500YesRedAN931-0-41-715, MIL-G-3036, MS35489-149X NASM3036101061T135000000000000000
    3/4"3/32"1/2"1"9/32"-60 to 500YesRedAN930-4, MIL-G-3036, MS35489-150X NASM3036101061T86000000000000000
    3/4"1/8"1/4"1"5/16"-60 to 500YesRedAN931-A4-12-715, MIL-G-3036, MS35489-36X NASM303651061T115000000000000000
    3/4"1/8"5/16"1"3/8"-60 to 500YesRedAN931-A5-12, MIL-G-3036, MS35489-39X NASM3036101061T49000000000000000
    3/4"1/8"1/2"1"5/16"-60 to 500YesRedAN931-0-42-715, MIL-G-3036 NASM3036101061T136000000000000000
    3/4"3/16"1/4"1"3/8"-60 to 500YesRedAN931-B4-12-715, MIL-G-3036, MS35489-65X NASM303651061T116000000000000000
    3/4"3/16"5/16"1"7/16"-60 to 500YesRedAN931-B5-12, MIL-G-3036, MS35489-68X NASM3036101061T51000000000000000
    3/4"1/4"1/4"1"7/16"-60 to 500YesRedAN931-C4-12-715, MIL-G-3036, MS35489-94X NASM303621061T1170000000000000
    3/4"1/4"5/16"1"1/2"-60 to 500YesRedAN931-C5-12-715, MIL-G-3036, MS35489-97X NASM303651061T122000000000000000
    13/16"1/16"5/16"1 1/16"5/16"-60 to 500YesRedAN931-5-13-715, MIL-G-3036, MS35489-118X NASM303651061T123000000000000000
    13/16"1/16"1/2"1 1/16"5/16"-60 to 500YesRedAN931-8-13, MIL-G-3036, MS35489-14X NASM303651061T18000000000000000
    13/16"1/16"9/16"1 1/16"5/16"-60 to 500YesRedAN931-9-13, MIL-G-3036, MS35489-16X NASM303651061T57000000000000000
    13/16"1/8"5/16"1 1/16"3/8"-60 to 500YesRedAN931-A5-13-715, MIL-G-3036, MS35489-122X NASM303621061T1240000000000000
    13/16"1/8"1/2"1 1/16"3/8"-60 to 500YesRedAN931-A8-13, MIL-G-3036, MS35489-43X NASM303651061T2800000000000000
    13/16"1/8"9/16"1 1/16"3/8"-60 to 500YesRedAN931-A9-13-715, MIL-G-3036, MS35489-45X NASM3036101061T141000000000000000
    13/16"3/16"1/2"1 1/16"7/16"-60 to 500YesRedAN931-B8-13, MIL-G-3036, MS35489-72X NASM303651061T55000000000000000
    13/16"1/4"5/16"1 1/16"1/2"-60 to 500YesRedAN931-C5-13-715, MIL-G-3036, MS35489-130X NASM303651061T126000000000000000
    13/16"1/4"1/2"1 1/16"1/2"-60 to 500YesRedAN931-C8-13, MIL-G-3036, MS35489-101X NASM303651061T3900000000000000
    13/16"1/4"9/16"1 1/16"1/2"-60 to 500YesRedAN931-C9-13-715, MIL-G-3036, MS35489-103X NASM303651061T143000000000000000
    7/8"1/16"5/8"1 1/8"5/16"-60 to 500YesRedAN931-10-14, MIL-G-3036, MS35489-17X NASM303651061T5800000000000000
    7/8"1/8"5/8"1 1/8"3/8"-60 to 500YesRedAN931-A10-14, MIL-G-3036, MS35489-46X NASM303651061T59000000000000000
    7/8"3/16"5/8"1 1/8"7/16"-60 to 500YesRedAN931-B10-14, MIL-G-3036, MS35489-75X NASM303651061T61000000000000000
    7/8"1/4"5/8"1 1/8"1/2"-60 to 500YesRedAN931-C10-14, MIL-G-3036, MS35489-104X NASM303651061T62000000000000000
    1"1/16"1/8"1 1/4"1/4"-60 to 500YesRedAN931-2-16-715, MIL-G-3036, MS35489-3X NASM303651061T101000000000000000
    1"1/16"1/4"1 1/4"1/4"-60 to 500YesRedAN931-4-16, MIL-G-3036, MS35489-8X NASM303651061T14000000000000000
    1"1/16"3/8"1 1/4"1/4"-60 to 500YesRedAN931-6-16, MIL-G-3036, MS35489-12X NASM303651061T54000000000000000
    1"1/16"11/16"1 5/16"3/8"-60 to 500YesRedAN931-11-16-715, MIL-G-3036, MS35489-19X NASM303651061T148000000000000000
    1"1/8"1/4"1 1/4"5/16"-60 to 500YesRedAN931-A4-16-715, MIL-G-3036, MS35489-37X NASM303621061T11800000000000000
    1"1/8"3/8"1 1/4"5/16"-60 to 500YesRedAN931-A6-16-715, MIL-G-3036, MS35489-41X NASM303621061T12800000000000000
    1"1/8"11/16"1 5/16"7/16"-60 to 500YesRedAN931-A11-16, MIL-G-3036, MS35489-48X NASM303651061T64000000000000000
    1"3/16"3/8"1 1/4"3/8"-60 to 500YesRedAN931-B6-16-715, MIL-G-3036, MS35489-70X NASM303621061T12900000000000000
    1"3/16"11/16"1 5/16"1/2"-60 to 500YesRedAN931-B11-16, MIL-G-3036, MS35489-77X NASM303611061T65000000000000
    1"1/4"1/4"1 1/4"7/16"-60 to 500YesRedAN931-C4-16-715, MIL-G-3036, MS35489-95X NASM303621061T1210000000000000
    1"1/4"3/8"1 1/4"7/16"-60 to 500YesRedAN931-C6-16-715, MIL-G-3036, MS35489-99X NASM303621061T13100000000000000
    1"1/4"11/16"1 5/16"9/16"-60 to 500YesRedAN931-C11-16, MIL-G-3036, MS35489-106X NASM303611061T66000000000000
    1 1/16"1/16"3/4"1 3/8"3/8"-60 to 500YesRedAN931-12-17, MIL-G-3036, MS35489-20X NASM303651061T67000000000000000
    1 1/16"1/8"3/4"1 3/8"7/16"-60 to 500YesRedAN931-A12-17, MIL-G-3036, MS35489-49X NASM303611061T68000000000000
    1 1/16"3/16"3/4"1 3/8"1/2"-60 to 500YesRedAN931-B12-17-715, MIL-G-3036, MS35489-78X NASM303651061T149000000000000000
    1 1/16"1/4"3/4"1 3/8"9/16"-60 to 500YesRedAN931-C12-17, MIL-G-3036, MS35489-107X NASM303611061T69000000000000
    1 1/8"3/32"7/8"1 1/2"11/32"-60 to 500YesRedAN931-D10-20-715, MIL-G-3036, MS35489-155X NASM303621061T147000000000000000
    1 1/4"1/16"1/2"1 1/2"1/4"-60 to 500YesRedAN931-8-20, MIL-G-3036, MS35489-15X NASM303611061T560000000000000
    1 1/4"1/16"5/8"1 1/2"1/4"-60 to 500YesRedAN931-10-20, MIL-G-3036, MS35489-18X NASM303621061T63000000000000000
    1 1/4"1/16"3/4"1 5/8"1/4"-60 to 500YesRedAN931-12-20, MIL-G-3036, MS35489-135X NASM303621061T7100000000000000
    1 1/4"1/16"7/8"1 5/8"7/16"-60 to 500YesRedAN931-14-20, MIL-G-3036, MS35489-22X NASM303621061T740000000000000
    1 1/4"1/8"1/2"1 1/2"5/16"-60 to 500YesRedAN931-A8-20-715, MIL-G-3036, MS35489-44X NASM303651061T137000000000000000
    1 1/4"1/8"5/8"1 1/2"5/16"-60 to 500YesRedAN931-A10-20-715, MIL-G-3036, MS35489-47X NASM303651061T144000000000000000
    1 1/4"1/8"3/4"1 5/8"5/16"-60 to 500YesRedAN931-A12-20-715, MIL-G-3036, MS35489-123X NASM303651061T151000000000000000
    1 1/4"1/8"7/8"1 5/8"1/2"-60 to 500YesRedAN931-A14-20, MIL-G-3036, MS35489-51X NASM303621061T7500000000000000
    1 1/4"3/16"1/2"1 1/2"3/8"-60 to 500YesRedAN931-B8-20-715, MIL-G-3036, MS35489-73X NASM303651061T138000000000000000
    1 1/4"3/16"5/8"1 1/2"3/8"-60 to 500YesRedAN931-B10-20-715, MIL-G-3036, MS35489-76X NASM303621061T14500000000000000
    1 1/4"3/16"3/4"1 5/8"3/8"-60 to 500YesRedAN931-B12-20-715, MIL-G-3036, MS35489-127X NASM303621061T15200000000000000
    1 1/4"3/16"7/8"1 5/8"9/16"-60 to 500YesRedAN931-B14-20, MIL-G-3036, MS35489-80X NASM303621061T76000000000000000
    1 1/4"1/4"1/2"1 1/2"7/16"-60 to 500YesRedAN931-C8-20-715, MIL-G-3036, MS35489-102X NASM303651061T139000000000000000
    1 1/4"1/4"5/8"1 1/2"7/16"-60 to 500YesRedAN931-C10-20-715, MIL-G-3036, MS35489-105X NASM303621061T14600000000000000
    1 1/4"1/4"3/4"1 5/8"7/16"-60 to 500YesRedAN931-C12-20-715, MIL-G-3036, MS35489-131X NASM303621061T15300000000000000
    1 3/8"1/16"1"1 3/4"7/16"-60 to 500YesRedAN931-16-22, MIL-G-3036, MS35489-23X NASM303621061T7700000000000000
    1 3/8"1/8"1"1 3/4"1/2"-60 to 500YesRedAN931-A16-22, MIL-G-3036, MS35489-52X NASM303621061T7800000000000000
    1 3/8"3/16"1"1 3/4"9/16"-60 to 500YesRedAN931-B16-22-715, MIL-G-3036, MS35489-81X NASM303621061T157000000000000000
    1 3/8"1/4"1"1 3/4"5/8"-60 to 500YesRedAN931-C16-22-715, MIL-G-3036, MS35489-110X NASM303621061T158000000000000000
    1 7/16"1/16"3/4"1 13/16"3/8"-60 to 500YesRedAN931-12-23-715, MIL-G-3036, MS35489-21X NASM303621061T154000000000000000
    1 5/8"1/16"3/4"2"3/8"-60 to 500YesRedAN931-12-26-715, MIL-G-3036, MS35489-120X NASM303621061T155000000000000000
    1 5/8"1/16"7/8"2"7/16"-60 to 500YesRedAN931-14-26-715, MIL-G-3036, MS35489-121X NASM303621061T156000000000000000
    1 3/4"1/16"1 1/2"2 1/8"7/16"-60 to 500YesRedAN931-24-28, MIL-G-3036, MS35489-27X NASM303611061T790000000000000
    1 3/4"1/8"1 1/2"2 1/8"1/2"-60 to 500YesRedAN931-A24-28, MIL-G-3036, MS35489-56X NASM303611061T81000000000000000
    1 3/4"3/16"1 1/2"2 1/8"9/16"-60 to 500YesRedAN931-B24-28-715, MIL-G-3036, MS35489-85X NASM303611061T163000000000000000
    1 3/4"1/4"1 1/2"2 1/8"5/8"-60 to 500YesRedAN931-C24-28-715, MIL-G-3036, MS35489-114X NASM303611061T164000000000000000
    1 7/8"1/16"1"2 1/4"7/16"-60 to 500YesRedAN931-16-30-715, MIL-G-3036, MS35489-24X NASM303611061T159000000000000000
    2 3/8"1/16"1 1/4"2 3/4"7/16"-60 to 500YesRedAN931-20-38-715, MIL-G-3036, MS35489-25X NASM303611061T161000000000000000
    2 1/2"1/16"1 1/4"2 7/8"7/16"-60 to 500YesRedAN931-20-40-715, MIL-G-3036, MS35489-26X NASM303611061T162000000000000000
     
    Style 2
    Image of Product. Front orientation. Grommets. Grommets, Style 2.
    Image of Attribute. Front orientation. Contains Annotated. Grommets, Style 2.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Pkg.
    For Hole
    Dia.
    For Material
    Thk.
    ID
    Flange
    Dia.
    Overall
    Ht.
    Temp.,
    ° F
    For Use
    Outdoors
    Color
    Pkg.
    Qty.
    1-9
    10-24
    25-Up
    Multipurpose SBR Rubber
    3/8"3/64"1/4"9/16"19/64"-30 to 170NoBlack1009600K43000000000000000000
    13/32"1/16"1/4"21/32"3/8"-30 to 170NoBlack109600K104000000000000000
    7/16"1/16"1/4"9/16"5/16"-30 to 170NoBlack1009600K44000000000000000
    7/16"1/16"1/4"5/8"7/16"-30 to 170NoBlack509600K103000000000000000
    7/16"1/16"5/16"5/8"11/32"-30 to 170NoBlack109600K105000000000000000
    1/2"1/16"5/16"3/4"7/16"-30 to 170NoBlack59600K107000000000000000
    1/2"1/8"1/4"3/4"7/16"-30 to 170NoBlack509600K69000000000000000
    1/2"1/8"5/16"3/4"3/8"-30 to 170NoBlack1009600K53000000000000000
    9/16"1/16"13/32"13/16"5/16"-30 to 170NoBlack1009600K35000000000000000
     
    Style 3
    Image of Product. Front orientation. Grommets. Grommets, Style 3.
    Image of Attribute. Front orientation. Contains Annotated. Grommets, Style 3.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Pkg.
    For Hole
    Dia.
    For Material
    Thk.
    ID
    Flange
    Dia.
    Overall
    Ht.
    Temp.,
    ° F
    For Use
    Outdoors
    Color
    Pkg.
    Qty.
    1-9
    10-24
    25-Up
    Multipurpose SBR Rubber
    1/4"7/64"5/32"21/64"13/64"-30 to 170NoBlack1009600K66000000000000000000
    3/8"5/32"9/32"5/8"11/32"-30 to 170NoBlack1009600K67000000000000000
     
    Style 4
    Image of Product. Front orientation. Grommets. Grommets, Style 4.
    Image of Attribute. Front orientation. Contains Annotated. Grommets, Style 4.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Pkg.
    For Hole
    Dia.
    For Material
    Thk.
    ID
    Flange
    Dia.
    Overall
    Ht.
    Temp.,
    ° F
    For Use
    Outdoors
    Color
    Pkg.
    Qty.
    1-9
    10-24
    25-Up
    Multipurpose SBR Rubber
    5/16"1/16"3/16"7/16", 5/8"7/32"-30 to 170NoBlack1009600K64000000000000000000
    7/16"3/64"1/4"3/4", 1"1/4"-30 to 170NoBlack109600K78000000000000000
    11/16"9/64"3/8"7/8", 1"13/32"-30 to 170NoBlack509600K65000000000000000
     
    Style 5
    Image of Product. Front orientation. Grommets. Grommets, Style 5.
    Image of Attribute. Front orientation. Contains Annotated. Grommets, Style 5.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Pkg.
    For Hole
    Dia.
    For Material
    Thk.
    ID
    Flange
    Dia.
    Overall
    Ht.
    Temp.,
    ° F
    For Use
    Outdoors
    Color
    Pkg.
    Qty.
    1-9
    10-24
    25-Up
    Multipurpose SBR Rubber
    2 7/8"3/32"2 5/8"3 3/4", 4"13/32"-30 to 170NoBlack19600K101000000000000000000
     
    Style 6
    Image of Product. Front orientation. Grommets. Grommets, Style 6.
    Image of Attribute. Front orientation. Contains Annotated. Grommets, Style 6.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Pkg.
    For Hole
    Dia.
    For Material
    Thk.
    ID
    Flange Dia.
    Overall
    Ht.
    Temp.,
    ° F
    For Use
    Outdoors
    Color
    Pkg.
    Qty.
    1-9
    10-24
    25-Up
    Multipurpose SBR Rubber
    3/16"1/16"1/8"17/64", 11/32"3/16"-30 to 170NoBlack509600K81000000000000000000
    15/64"1/16"5/32"9/32", 3/8"5/16"-30 to 170NoBlack509600K87000000000000000
    3/8"3/64"1/4"15/32", 9/16"5/32"-30 to 170NoBlack509600K74000000000000000
    7/16"1/16"1/4"3/4"9/16"-30 to 170NoBlack109600K106000000000000000
     
    Style 7
    Image of Product. Front orientation. Grommets. Grommets, Style 7.
    Image of Attribute. Front orientation. Contains Annotated. Grommets, Style 7.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Pkg.
    For Hole
    Dia.
    For Material
    Thk.
    ID
    Flange Dia.
    Overall
    Ht.
    Temp.,
    ° F
    For Use
    Outdoors
    Color
    Pkg.
    Qty.
    1-9
    10-24
    25-Up
    Multipurpose SBR Rubber
    29/64"3/16"5/16"33/64", 5/8"9/32"-30 to 170NoBlack509600K112000000000000000000
     
    Style 8
    Image of Product. Front orientation. Grommets. Grommets, Style 8.
    Image of Attribute. Front orientation. Contains Annotated. Grommets, Style 8.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Pkg.
    For Hole
    Dia.
    For Material
    Thk.
    ID
    Flange
    Dia.
    Overall
    Ht.
    Temp.,
    ° F
    For Use
    Outdoors
    Color
    Pkg.
    Qty.
    1-9
    10-24
    25-Up
    Multipurpose SBR Rubber
    1/2"3/16"5/16"5/8"1/2"-30 to 170NoBlack509600K79000000000000000000
     

    Fabric Grommets

    Add a protective metal ring to a hole so rope and cable don’t tear your tarp, cover, or curtain. To install, strike a cutting punch with a mallet to create the hole, then set the grommet using either an installation punch or a press. All of these grommets can be used outdoors. Installation tools are sold separately.
    Standard Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Fabric Grommets, Standard Washer.
    Brass—Add a bright finish to your fabric.
    Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Brass
    000.063"3/16"0.425"0.135"YesNASM20230509604K2100000
    00.101"1/4"0.545"0.175"YesNASM20230509604K220000
    10.108"9/32"0.687"0.185"YesNASM20230509604K230000
    20.14"3/8"0.815"0.215"YesNASM20230509604K240000
    30.219"7/16"0.97"0.295"YesNASM20230509604K2500000
    40.298"1/2"1.05"0.374"YesNASM20230509604K2600000
    50.254"5/8"1.22"0.33"YesNASM20230259604K2700000
    60.149"13/16"1.75"0.232"YesNASM20230109604K2800000
     
    Nickel-Plated Brass
    000.063"3/16"0.425"0.135"YesNASM164915086625K310000
    00.101"1/4"0.545"0.175"YesNASM164915086625K320000
    10.108"9/32"0.687"0.185"YesNASM164915086625K3300000
    20.14"3/8"0.815"0.215"YesNASM164915086625K3400000
    30.219"7/16"0.97"0.295"YesNASM164915086625K3500000
    40.298"1/2"1.05"0.374"YesNASM164912586625K3600000
    50.254"5/8"1.22"0.33"YesNASM164912586625K3700000
    60.149"13/16"1.75"0.232"YesNASM164911086625K3800000
     
    Accessories for Grommets
    Installation and Cutting Punches
    Image of Product. Front orientation. Fabric Fastener Installation Tools. Hammer-Driven Installation Punch.

    Hammer-Driven

    Installation

    Punch

    Image of Product. Front orientation. Fabric Fastener Installation Tools. Hammer-Driven Cutting Punch.

    Hammer-Driven

    Cutting Punch

    Hammer-Driven Installation Punch—The economical choice if you’re installing a few grommets at a time. Align the grommet base, fabric, and washer on the die (included). A few sharp taps on the punch cinch the grommet in the hole. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    Hammer-Driven Cutting Punch—Create a hole in your fabric with a few sharp mallet taps on the cutting punch. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    For Grommet
    Trade Size
    For Hole
    Dia.
    Material
    Each
    Hammer-Driven Installation Punch
    003/16"—9612K25000000
    01/4"—9612K2600000
    19/32"—9612K2700000
    23/8"—9612K2800000
    37/16"—9612K2900000
    41/2"—9612K3100000
    55/8"—9612K3200000
    613/16"—9612K3300000
     
    Hammer-Driven Cutting Punch
    003/16"Steel9611K1100000
    01/4"Steel9611K1200000
    19/32"Steel9611K1300000
    23/8"Steel9611K1400000
    37/16"Steel9611K1500000
    41/2"Steel9611K1600000
    55/8"Steel9611K1700000
    63/4"Steel9611K1800000
     
    Manual Presses
    Image of Product. Front orientation. Contains Annotated. Fabric Fastener Installation Tools. Manual Press.

    Manual Press

    Manual Press—Saves time and effort if you’re frequently installing or replacing grommets. Install the required two-piece die set (sold separately) on the press, align the grommet in the hole, and squeeze the handle. For a longer service life, lubricate the handle and plunger with a drop of oil.
    Throat
    Max.
    Opening
    Dp.
    Wd.
    Material
    Each
    Manual Press
    7/8"3 1/4"1 3/4"Aluminum95720A6900000000
     
    Grommet Dies
    Image of Product. Front orientation. Grommet Dies.
    For Grommet
    Trade Size
    Hole
    Size
    Each
    003/16"95720A710000000
    01/4"95720A71500000
    19/32"95720A72000000
    23/8"95720A73000000
    37/16"95720A74000000
    Tooth-Lock Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Fabric Grommets, Tooth-Lock Washer.
    Teeth grip the fabric for a stronger hold than standard washers.
    Brass—Add a bright finish to your fabric.
    Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Brass
    00.101"1/4"0.545"0.175"YesNASM16491509605K2100000
    10.108"9/32"0.687"0.185"YesNASM16491509605K2200000
    20.141"3/8"0.815"0.215"YesNASM16491509605K2300000
    30.219"7/16"0.97"0.295"YesNASM16491509605K2400000
    40.295"1/2"1.05"0.374"YesNASM16491509605K2500000
    50.251"5/8"1.22"0.33"YesNASM16491259605K2600000
     
    Nickel-Plated Brass
    00.101"1/4"0.545"0.175"YesNASM16491509604K310000
    10.108"9/32"0.687"0.185"YesNASM16491509604K3200000
    20.141"3/8"0.815"0.215"YesNASM16491509604K3300000
    30.219"7/16"0.97"0.295"YesNASM16491259604K340000
     
    Accessories for Grommets
    Installation and Cutting Punches
    Image of Product. Front orientation. Fabric Fastener Installation Tools. Hammer-Driven Installation Punch.

    Hammer-Driven

    Installation

    Punch

    Image of Product. Front orientation. Fabric Fastener Installation Tools. Hammer-Driven Cutting Punch.

    Hammer-Driven

    Cutting Punch

    Hammer-Driven Installation Punch—The economical choice if you’re installing a few grommets at a time. Align the grommet base, fabric, and washer on the die (included). A few sharp taps on the punch cinch the grommet in the hole. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    Hammer-Driven Cutting Punch—Create a hole in your fabric with a few sharp mallet taps on the cutting punch. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    For Grommet
    Trade Size
    For Hole
    Dia.
    Material
    Each
    Hammer-Driven Installation Punch
    01/4"—9612K26000000
    19/32"—9612K2700000
    23/8"—9612K2800000
    37/16"—9612K2900000
    41/2"—9612K3100000
    55/8"—9612K3200000
     
    Hammer-Driven Cutting Punch
    01/4"Steel9611K1200000
    19/32"Steel9611K1300000
    23/8"Steel9611K1400000
    37/16"Steel9611K1500000
    41/2"Steel9611K1600000
    55/8"Steel9611K1700000
     
    Manual Presses
    Image of Product. Front orientation. Contains Annotated. Fabric Fastener Installation Tools. Manual Press.

    Manual Press

    Manual Press—Saves time and effort if you’re frequently installing or replacing grommets. Install the required two-piece die set (sold separately) on the press, align the grommet in the hole, and squeeze the handle. For a longer service life, lubricate the handle and plunger with a drop of oil.
    Throat
    Max.
    Opening
    Dp.
    Wd.
    Material
    Each
    Manual Press
    7/8"3 1/4"1 3/4"Aluminum95720A6900000000
     

    Fabric Grommet Kits

    Kits include grommets of a single size and all the tools you need to install them. The grommets add a protective metal ring to a hole so rope and cable don’t tear your tarp, cover, or curtain. Strike the cutting punch with a mallet to create a hole, then set the grommet using the installation punch and die set.
    Standard Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Fabric Grommet Kits, Standard Washer.
    Image of Product. Front orientation. Grommets. Fabric Grommet Kits.
    Brass—Add a bright finish to your fabric.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Mil. Spec.
    Includes
    No. of
    Grommets
    Each
    Brass
    00.1"1/4"0.545"0.175"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K31000000
    10.1"9/32"0.687"0.185"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K3200000
    20.14"3/8"0.815"0.215"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K1300000
    30.21"7/16"0.97"0.295"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch129610K3400000
    40.29"1/2"1.05"0.374"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch129610K3500000
     
    Tooth-Lock Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Fabric Grommet Kits, Tooth-Lock Washer.
    Image of Product. Front orientation. Grommets. Fabric Grommet Kits.
    Teeth grip the fabric for a stronger hold than standard washers.
    Brass—Add a bright finish to your fabric.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Mil. Spec.
    Includes
    No. of
    Grommets
    Each
    Brass
    00.11"1/4"0.545"0.175"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch489610K16000000
    10.12"9/32"0.687"0.185"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch489610K1700000
    20.15"3/8"0.815"0.215"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K1800000
    30.23"7/16"0.97"0.295"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K1900000
    40.3"1/2"1.05"0.374"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K2100000
     

    Reinforcing Fabric Grommets

    These grommets handle thick materials and strain from fabric that’s frequently pulled or stretched. Strike a cutting punch with a mallet to create the hole, then set the grommet using either an installation punch or a press. Installation tools are sold separately.
    Extended-Neck Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Reinforcing Fabric Grommets, Extended-Neck Washer.
    An extended neck gives these washers a stronger hold than our other fabric grommets.
    Brass—Add a bright finish to your fabric.
    Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Mil. Spec.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Brass
    000.062"3/16"0.425"0.135"YesAN230, MIL-G-16491NASM16491, NASM20230508271K3100000
    00.102"1/4"0.545"0.175"YesAN230, MIL-G-16491NASM16491, NASM20230508271K320000
    10.112"9/32"0.687"0.185"YesAN230, MIL-G-16491NASM16491, NASM20230508271K330000
    20.139"3/8"0.815"0.215"YesAN230, MIL-G-16491NASM16491, NASM20230508271K3400000
    30.218"7/16"0.97"0.295"YesAN230, MIL-G-16491NASM16491, NASM20230508271K3500000
    40.296"1/2"1.05"0.374"YesAN230, MIL-G-16491NASM16491, NASM20230258271K3600000
     
    Nickel-Plated Brass
    000.062"3/16"0.425"0.135"YesAN230, MIL-G-16491NASM20230509604K350000
    00.102"1/4"0.545"0.175"YesAN230, MIL-G-16491NASM20230509604K360000
    10.112"9/32"0.687"0.185"YesAN230, MIL-G-16491NASM20230509604K3700000
    20.139"3/8"0.815"0.215"YesAN230, MIL-G-16491NASM20230509604K3800000
    30.218"7/16"0.97"0.295"YesAN230, MIL-G-16491NASM20230259604K390000
     
    Accessories for Grommets
    Installation and Cutting Punches
    Image of Product. Front orientation. Fabric Fastener Installation Tools. Reinforcing, Hammer-Driven Installation Punch.

    Hammer-Driven

    Installation

    Punch

    Image of Product. Front orientation. Fabric Fastener Installation Tools. Reinforcing, Hammer-Driven Cutting Punch.

    Hammer-Driven

    Cutting Punch

    Hammer-Driven Installation Punch—The economical choice if you’re installing a few grommets at a time. Align the grommet base, fabric, and washer on the die (included). A few sharp taps on the punch cinch the grommet in the hole. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    Hammer-Driven Cutting Punch—Create a hole in your fabric with a few sharp mallet taps on the cutting punch. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    For Grommet
    Trade Size
    For Hole
    Dia.
    Material
    Each
    Hammer-Driven Installation Punch
    003/16"—9612K25000000
    01/4"—9612K2600000
    19/32"—9612K2700000
    23/8"—9612K2800000
    37/16"—9612K2900000
    41/2"—9612K3100000
     
    Hammer-Driven Cutting Punch
    003/16"Steel9611K1100000
    01/4"Steel9611K1200000
    19/32"Steel9611K1300000
    23/8"Steel9611K1400000
    37/16"Steel9611K1500000
    41/2"Steel9611K1600000
     
    Manual Presses
    Image of Product. Front orientation. Contains Annotated. Fabric Fastener Installation Tools. Reinforcing, Manual Press.

    Manual Press

    Manual Press—Saves time and effort if you’re frequently installing or replacing grommets. Install the required two-piece die set (sold separately) on the press, align the grommet in the hole, and squeeze the handle. For a longer service life, lubricate the handle and plunger with a drop of oil.
    Throat
    Max.
    Opening
    Dp.
    Wd.
    Material
    Each
    Manual Press
    7/8"3 1/4"1 3/4"Aluminum95720A6900000000
     
    Grommet Dies
    Image of Product. Front orientation. Grommet Dies.
    For Grommet
    Trade Size
    Hole
    Size
    Each
    003/16"95720A710000000
    01/4"95720A71500000
    19/32"95720A72000000
    23/8"95720A73000000
    37/16"95720A74000000
    Rolled Rim with Tooth-Lock Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Reinforcing Fabric Grommets, Rolled Rim with Tooth-Lock Washer.
    Teeth grip the fabric for an even stronger hold than other reinforcing fabric grommets. Use these washers for fabric under the highest strain, such as a tarp secured by bungee cords.
    Brass—Add a bright finish to your fabric.
    Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Mil. Spec.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Brass
    00.096"9/32"0.67"0.175"YesAN230, MIL-G-16491NASM20230509606K41000000
    10.126"13/32"0.79"0.205"YesAN230, MIL-G-16491NASM20230509606K4200000
    20.174"7/16"0.89"0.255"YesAN230, MIL-G-16491NASM20230259606K4300000
    30.172"15/32"0.97"0.255"YesAN230, MIL-G-16491NASM20230259606K4400000
    40.237"9/16"1.12"0.32"YesAN230, MIL-G-16491NASM20230259606K4500000
    50.296"5/8"1.285"0.38"YesAN230, MIL-G-16491NASM20230109606K4600000
    60.332"3/4"1.535"0.42"YesAN230, MIL-G-16491NASM2023059606K470000
    70.363"29/32"1.725"0.446"YesAN230, MIL-G-16491NASM2023059606K4800000
    80.382"1 3/32"1.865"0.465"YesAN230, MIL-G-16491NASM2023059606K4900000
     
    Nickel-Plated Brass
    00.096"9/32"0.67"0.175"YesAN230, MIL-G-16491NASM16491, NASM202305087995K5100000
    10.126"13/32"0.79"0.205"YesAN230, MIL-G-16491NASM16491, NASM202302587995K520000
    20.174"7/16"0.89"0.255"YesAN230, MIL-G-16491NASM16491, NASM202302587995K5300000
    30.172"15/32"0.97"0.255"YesAN230, MIL-G-16491NASM16491, NASM202302587995K5400000
    40.237"9/16"1.12"0.32"YesAN230, MIL-G-16491NASM16491, NASM202301087995K550000
    50.296"5/8"1.285"0.38"YesAN230, MIL-G-16491NASM16491, NASM202301087995K560000
    60.332"3/4"1.535"0.42"YesAN230, MIL-G-16491NASM16491, NASM20230587995K570000
    70.363"29/32"1.725"0.446"YesAN230, MIL-G-16491NASM16491, NASM20230587995K5800000
    80.382"1 3/32"1.865"0.465"YesAN230, MIL-G-16491NASM16491, NASM20230587995K5900000
     
    Accessories for Grommets
    Installation and Cutting Punches
    Image of Product. Front orientation. Fabric Fastener Installation Tools. Reinforcing, Hammer-Driven Installation Punch.

    Hammer-Driven

    Installation

    Punch

    Image of Product. Front orientation. Fabric Fastener Installation Tools. Reinforcing, Hammer-Driven Cutting Punch.

    Hammer-Driven

    Cutting Punch

    Hammer-Driven Installation Punch—The economical choice if you’re installing a few grommets at a time. Align the grommet base, fabric, and washer on the die (included). A few sharp taps on the punch cinch the grommet in the hole. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    Hammer-Driven Cutting Punch—Create a hole in your fabric with a few sharp mallet taps on the cutting punch. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    For Grommet
    Trade Size
    For Hole
    Dia.
    Material
    Each
    Hammer-Driven Installation Punch
    09/32"—9612K17000000
    113/32"—9612K1800000
    27/16"—9612K1900000
    315/32"—9612K2100000
    49/16"—9612K2200000
    55/8"—9612K2300000
    63/4"—9612K2400000
    729/32"—9612K35000000
    81 3/32"—9612K36000000
     
    Hammer-Driven Cutting Punch
    01/4"Steel9611K1200000
    19/32"Steel9611K1300000
    23/8"Steel9611K1400000
    37/16"Steel9611K1500000
    41/2"Steel9611K1600000
    55/8"Steel9611K1700000
    63/4"Steel9611K1800000
    77/8"Steel9611K1900000
    81"Steel9611K2100000
     
    Manual Presses
    Image of Product. Front orientation. Contains Annotated. Fabric Fastener Installation Tools. Reinforcing, Manual Press.

    Manual Press

    Manual Press—Saves time and effort if you’re frequently installing or replacing grommets. Install the required two-piece die set (sold separately) on the press, align the grommet in the hole, and squeeze the handle. For a longer service life, lubricate the handle and plunger with a drop of oil.
    Throat
    Max.
    Opening
    Dp.
    Wd.
    Material
    Each
    Manual Press
    7/8"3 1/4"1 3/4"Aluminum95720A6900000000
     
    Grommet Dies
    Image of Product. Front orientation. Grommet Dies.
    For Grommet
    Trade Size
    Hole
    Size
    Each
    09/32"95720A810000000
    113/32"95720A82000000
    back to top