A nonreflective black oxide finish prevents glare that can interfere with machine vision systems.

The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

Reduce the chance of getting pinched when unclamping. These clamps have more space between the handle and the arm than other low-profile toggle clamps.

Push the lever to lock the handle and prevent accidental opening.

Push the lever to lock the handle and prevent accidental opening.

Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.

The handle locks in a horizontal position for more clearance above the clamp.

Two sets of mounting holes allow mounting on the bottom or side.

Attach one of these nonmarring rubber or plastic tips to prevent a metal holding screw from damaging workpiece surfaces.

These clamps have mounting holes on the bottom.

Secure your workpiece from the side by fully extending the plunger, and push a lever to lock the handle in place.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Push or pull the plunger to hold your workpiece from the side.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

Push the lever to lock the handle and prevent accidental opening.

Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side.