Filler Material Filler Material | Show |
|---|
|
Filler Material Filler Material | Hide |
|---|
|
|
System of Measurement System of Measurement |
|---|
|
For Motion Type For Motion Type |
|---|
 | Reciprocating |
Material Material |
|---|
|
For Groove Diameter For Groove Diameter |
|---|
|
|
|
For Cylinder Type For Cylinder Type |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Cylinder Seal Type Cylinder Seal Type |
|---|
 |
| Wear Ring |
Seal Thickness Seal Thickness |
|---|
|
Color Color |
|---|
 | Gray |
For Use With For Use With |
|---|
Hardness Hardness |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Cylinder Seals
Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
High-Speed Wear Rings
Made from PTFE, these wear rings have a slippery surface that allows rods to move at least three times faster than nylon wear rings.
Gap size is the maximum distance between the split ends of the ring while it is in use. Rings are closed when not in use.
For technical drawings and 3-D models, click on a part number.
For Rod Sealing | For Piston Sealing | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | For Groove Dia. | For Bore Dia. | For Groove Dia. | Gap Size | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Mineral Fiber-Filled PTFE Plastic | ||||||||||
For 0.26" Groove Wd. | ||||||||||
| 1/4" | 0.500" | 1/2" | 0.250" | 0.017" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 000000 |
| 3/8" | 0.625" | 5/8" | 0.375" | 0.021" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1/2" | 0.750" | 3/4" | 0.500" | 0.024" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 5/8" | 0.875" | 7/8" | 0.625" | 0.027" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 3/4" | 1.000" | 1" | 0.750" | 0.032" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 7/8" | 1.125" | 1 1/8" | 0.875" | 0.036" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1" | 1.250" | 1 1/4" | 1.000" | 0.039" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/8" | 1.375" | 1 3/8" | 1.125" | 0.042" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/4" | 1.500" | 1 1/2" | 1.250" | 0.046" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 5/8" | 1.875" | 1 7/8" | 1.625" | 0.056" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
For 0.385" Groove Wd. | ||||||||||
| 1/2" | 0.750" | 3/4" | 0.500" | 0.024" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 7/8" | 1.125" | 1 1/8" | 0.875" | 0.036" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1" | 1.250" | 1 1/4" | 1.000" | 0.039" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/8" | 1.375" | 1 3/8" | 1.125" | 0.042" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/4" | 1.500" | 1 1/2" | 1.250" | 0.046" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |