Body Material Body Material |
|---|
|
Holding Capacity Holding Capacity |
|---|
|
Clamping Surface Type Clamping Surface Type |
|---|
 |  |
| Fixed | Swivel Pad |
 | |
| Pivoting Jaw |
Maximum Magnetic Pull Maximum Magnetic Pull |
|---|
Overall Length Overall Length |
|---|
|
|
|
Clamping Angle Clamping Angle |
|---|
|
Screw Finish Screw Finish |
|---|
|
About Thumb Screw and Binding Post Materials
More
Easy On/Off Magnetic Clamps
160 lbs. Max.
Magnetic Pull
Use the switch to engage and disengage the magnet for easy placement and removal of your workpiece.
Overall | ||||||
|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Holding Angle | Lg. | Wd. | Ht. | Each | |
| 65 | 45°, 90° | 4 3/8" | 1" | 3 3/4" | 0000000 | 000000 |
| 75 | 45°, 90° | 6" | 1 1/4" | 5 1/8" | 0000000 | 00000 |
| 80 | 45°, 75°, 90°, 105°, 135° | 3 1/2" | 1 15/16" | 3 1/2" | 0000000 | 00000 |
| 90 | 45°, 90° | 4 3/8" | 1 1/8" | 3 3/4" | 0000000 | 00000 |
| 150 | 90° | 1 1/2" | 1 1/2" | 2 3/4" | 0000000 | 00000 |
| 160 | 45°, 90° | 6" | 1 3/8" | 5 1/8" | 0000000 | 00000 |
| 450 | 90° | 3" | 2 1/2" | 4 5/8" | 0000000 | 000000 |
| 1,000 | 90° | 4 1/4" | 4" | 4 3/4" | 0000000 | 000000 |
Magnetic Clamps
Max.
Magnetic Pull
Max.
Magnetic Pull
100- and 325-lbs. maximum pull clamps have a handle for extra leverage to remove the clamp from a surface.
Overall | ||||||
|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Holding Angle | Lg. | Wd. | Ht. | Each | |
| 22 | 30°, 45°, 60°, 75°, 90° | 4" | 1/2" | 2 1/2" | 0000000 | 000000 |
| 55 | 30°, 45°, 60°, 75°, 90° | 4 3/8" | 3/4" | 3" | 0000000 | 0000 |
| 100 | 45°, 90°, 135° | 8 7/8" | 1 5/8" | 8 7/8" | 0000000 | 000000 |
| 110 | 30°, 45°, 60°, 75°, 90° | 4 3/8" | 1 9/16" | 3" | 0000000 | 00000 |
| 112 | 45°, 90°, 135° | 3 3/4" | 3/4" | 4 3/8" | 0000000 | 00000 |
| 325 | 45°, 90° | 8" | 1 1/2" | 8" | 0000000 | 00000 |
Miniature Adjustable-Angle Magnetic Clamps
Sized for small parts and tight spaces, these clamps have a pivoting pad at each end to hold workpieces at any angle up to 180°.
| Holding Angles | Number of Pieces | Includes | Each | |
| 0°-180° | 4 | Two 2 1/4" Lg. × 1" Wd. Clamps with 14 lbs. Max. Magnetic Pull Two 2 1/2" Lg. × 1 1/2" Wd. Clamps with 18 lbs. Max. Magnetic Pull | 0000000 | 000000 |
Easy On/Off Adjustable-Angle Magnetic Clamps
Each arm has a handle for turning the magnets on and off. Adjust these clamps to hold at any angle from 22° to 270° and lock the arms in place at the joint.
Arm | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Holding Angles | Lg. | Wd. | Ht. | Overall Lg. | Features | Each | |
| 200 | 22°-270° | 9 1/4" | 1 11/16" | 1 1/2" | 15 3/4" | Magnet On/Off Knobs | 0000000 | 0000000 |
Adjustable-Angle Magnetic Clamps
Two clamps connected by a pivoting arm hold workpieces at nearly any angle.
Overall | ||||||
|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Holding Angles | Lg. | Wd. | Ht. | Each | |
| 120 | 15°-180° | 7 5/8" | 1 3/8" | 3 3/4" | 0000000 | 000000 |
Outside-Clamping Magnetic Clamps
Clamp workpieces from the outside at a 90° angle, leaving the inside free for welding or fabrication. You can also clamp on the inside at 45° and 90°.
Overall | |||||||
|---|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Outside Holding Angle | Inside Holding Angle | Lg. | Wd. | Ht. | Each | |
| 40 | 90° | 45°, 90° | 5 1/2" | 5/8" | 2 7/8" | 0000000 | 000000 |
Right-Angle Latch-Style Toggle Clamps
Mount the clamp on a lid and the latch plate on the side of a container. Fit the draw arm over a latch plate and pull the handle to clamp.
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Draw Arm | When Clamped | Replacement Latch Plates | ||||||||
| Holding Capacity, lbs. | Travel | Adjustment Lg. | Clearance | Overall Ht. | Overall Lg. | Latch Plate Included | Each | Each | ||
U-Style Draw Arm | ||||||||||
Steel | ||||||||||
| 500 | 1 1/2" | 15/16" | 3/16" | 3 3/8" | 3 1/2" | Yes | 0000000 | 000000 | 000000 | 00000 |
| 500 | 1 5/8" | 1/2" | 2" | 2" | 3 1/2" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 1,000 | 2 1/8" | 25/32" | 2 7/8" | 2 3/8" | 4 1/8" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 2,000 | 2 1/2" | 1 1/4" | 3 7/8" | 3 1/2" | 5 7/8" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 4,000 | 1 3/4" | 2 3/8" | 1/2" | 2 3/8" | 6 5/8" | Yes | 0000000 | 000000 | 00000000 | 0000 |
18-8 Stainless Steel | ||||||||||
| 500 | 1 5/8" | 1/2" | 2" | 2" | 3 1/2" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 1,000 | 2 1/8" | 25/32" | 2 7/8" | 2 3/8" | 4 1/8" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 2,000 | 2 1/2" | 1 1/4" | 3 7/8" | 3 1/2" | 5 7/8" | Yes | 0000000 | 00000 | 000000 | 00000 |
Right-Angle Latch-Style Toggle
Clamps with Locking Handle
Push the lever to lock the handle and prevent accidental opening. Mount the clamp on a lid and the latch plate on the side of a container. Fit the draw arm over a latch plate and pull the handle to clamp.
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Draw Arm | When Clamped | Replacement Latch Plates | ||||||||
| Holding Capacity, lbs. | Travel | Adjustment Lg. | Clearance | Overall Ht. | Overall Lg. | Latch Plate Included | Each | Each | ||
U-Style Draw Arm | ||||||||||
Steel | ||||||||||
| 500 | 1 5/8" | 1/2" | 2" | 2 1/8" | 3 1/2" | Yes | 0000000 | 000000 | 000000 | 00000 |
| 1,000 | 2 1/8" | 25/32" | 2 7/8" | 2 3/8" | 4 1/8" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 2,000 | 2 1/2" | 1 1/4" | 3 7/8" | 3 1/2" | 5 7/8" | Yes | 0000000 | 00000 | 000000 | 0000 |
18-8 Stainless Steel | ||||||||||
| 500 | 1 1/2" | 15/16" | 3/16" | 3 3/8" | 3 1/2" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 1,000 | 2 1/16" | 1 5/16" | 3/8" | 4 1/2" | 4 1/8" | Yes | 0000000 | 00000 | 000000 | 0000 |
| 2,000 | 2 7/16" | 1 3/4" | 1/2" | 6 1/2" | 5 3/4" | Yes | 0000000 | 00000 | 000000 | 00000 |
Band Clamps
An easy-to-tighten band encircles and holds round and odd-shaped objects with even pressure. A lock holds and releases the band.
Band | Handle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Wd. | Material | Holding Capacity, lbs. | Style | Material | Screw Material | Includes | Each | |
| 13 | 1" | Nylon Plastic | 65 | Screwdriver | Plastic | __ | Four Removable Clamping Pads | 000000 | 000000 |
| 16 | 1" | Nylon Plastic | 160 | Pistol | Plastic | __ | Four Removable Clamping Pads | 000000 | 00000 |
| 23 | 1" | Polyester Fabric | Not Rated | Crank | Plastic | Steel | Four Removable Clamping Pads | 0000000 | 00000 |
Heavy Duty Corner Clamps
With five times the capacity of standard corner clamps, these secure two workpieces at a 90° angle. They have a pivoting clamping surface to hold materials of unequal thicknesses simultaneously. The screw is copper plated to resist weld spatter.
Corner Clamps
Hold two workpieces at 90°.
Opening | Clamping Surface | Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Holding Capacity, lbs. | Ht. | Material | Number of | Dia. | Mounting Fasteners Included | Each | |
| 3" | 0" | 200 | 9/16" | Nylon Plastic | 2 | 13/64" | No | 0000000 | 000000 |
Adjustable-Angle Corner Clamps
Position workpieces at any angle from 0° to 180°.
Opening | Clamping Surface | Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Holding Capacity | Ht. | Material | No. of | Dia. | Center-to-Center | Mounting Fasteners Included | Each | |
| 3" | 0" | Not Rated | 1" | A383 Aluminum | 2 | 1/4" | 4" | No | 0000000 | 000000 |
Three-Axis Corner Clamps
Clamp up to three workpieces at 90° angles. Press a button to move the threaded holding screws in or out. The third axis clamping arm swings out of the way for material removal. The screws are copper plated to resist weld spatter.
Opening | Fixed Clamping Surface | Mounting Slots | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Holding Capacity, lbs. | Ht. | Material | Number of | Lg. | Wd. | Mounting Fasteners Included | Each | |
| 3 3/4" | 0" | 550 | 1 3/8" | Iron | 2 | 1 1/2" | 7/16" | No | 0000000 | 0000000 |
Adjustable-Angle Handscrew Clamps
Each jaw can be positioned at an angle to hold round, angled, and odd-shaped material. The two screws turn independently to make individual adjustments.
Bar Clamps for Round and Angled Material
Two swivel pads on each jaw pivot to grip nearly any shape of material. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
Right-Angle Locking Plier Clamps for Sheets
Angled jaws clamp sheets, bars, and U-channels at 90°. Turn the knob to adjust the opening size; squeeze the handles to lock the clamp in place. Press the lever to release.
Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity | Overall Lg. | Lock Release | Body Material | Each | |
Fixed Jaws | ||||||||
| 3/8" | 0" | 1/2" | Not Rated | 9" | Lever | Steel | 0000000 | 000000 |
Recessed Joint Clamps for Wood
Install in a cutout to create a secure joint between boards, butcher blocks, and countertops. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.