Spend less time on blade changes when cutting steel and stainless steel. These blades have teeth that are a blend of ceramic and carbide, so they cut both materials and last five times longer than blades with standard carbide teeth. An aluminum alloy coating on their body resists heat buildup to prevent them from dulling and getting gummed up with metal shards. Since they stay cool, they won’t accidentally harden the edge that you’re cutting. To keep your cuts straight and accurate, they have anti-vibration vents that limit shaking. The vents further reduce heat buildup to prevent dulling. Use these blades for applications such as cutting steel bars to size or cutting bevels and angles into stainless steel framing to make a window.

Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

For technical drawings and 3-D models, click on a part number.

Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter.

For technical drawings and 3-D models, click on a part number.

Cut wood, plywood, and particleboard. Choose blades with more teeth for cutting across the grain; choose blades with fewer teeth for cutting with the grain (ripping). Blades with a narrower width of cut make faster cuts with less material loss.

The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass. Blades come with a reducer bushing to adjust the arbor diameter.

For technical drawings and 3-D models, click on a part number.

Cut through metal, plastic, and other materials without having to change blades. These blades have carbide-tipped teeth that make clean cuts through plastic while being durable enough to make burr-free cuts through metal.

When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. Choose more teeth for a smoother cut; choose fewer teeth for a faster cut and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Blades with an aluminum-alloy-coated body resist heat buildup when cutting, so they stay sharp and don’t get gummed up with dust and metal shards. Since they stay cool, they won’t accidentally burn or harden the edge that you’re cutting. These blades also have anti-vibration vents that limit shaking for straight, accurate cuts. They further reduce heat buildup to prevent dulling.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

For technical drawings and 3-D models, click on a part number.

Often used to create door frames and aluminum supports, these saws make precise angled cuts for tight-fitting joints. The head swivels to make miter cuts across the face of your material.

Style A saws have a tilting head that makes beveled cuts through the thickness of your material. Use these saws on wood and soft metals such as aluminum and copper.

Style B saws cut harder metals than Style A saws—and they do so without coolant or excessive heat, which can warp your workpiece. By running at slower speeds than all of our other miter saws, they handle steel, stainless steel, and other hard metals, as well as soft metals, such as aluminum. Compared to saws with abrasive wheels, they cut more quickly and create fewer sparks.

Make angled cuts in material that’s too wide for a standard miter saw—the arm on these saws slides for added reach. Swivel the head to make miter cuts across the width of your workpiece. For bevel cuts downward through your material, tilt the blade. While primarily used to cross-cut wood, these saws can also handle metal and other materials.

Our smallest and lightest miter saw weighs only 12 pounds—great to use throughout your facility. These saws are good for light duty cutting through small pieces of wood, plastic, and metal. Part of the base swivels to make angled miter cuts. Use the included vise to secure your workpiece. Its V-groove holds round pieces like pipes, tubes, and rods.

Use this saw to cut precise angles by hand. Also known as a miter box saw. It has an adjustable cutting depth. Cutting angles listed are for both left- and right-hand cuts.

Support all brands of miter saws at a comfortable working height with the universal mounting clamps on this stand. Arms adjust from 44" to 100" wide.

Use an abrasive wheel with these saws for general purpose cutting jobs. You can cut steel square structural tubing, aluminum conduit, and other hard materials.

Saws with a quick-release vise adjust easily—just flip a lever then slide the vise jaw open or closed. With a tool-free wheel change, you release the wheel by turning the clamp that holds it in place.

Operate this saw at a low rpm to make quick, straight cuts in metal without excessive heat or the need for coolant.

These lightweight saws have a smaller wheel diameter than standard bench-top cutoff saws. They’re small and easy to move, yet powerful enough to cut through steel. They use metal blades instead of abrasive wheels for cooler, burr-free cuts with few sparks, fumes, and dust. Operate these saws at a low rpm to make quick, straight cuts in metal. A quick-release vise lets you secure and release your material quickly with the flip of a lever. Connect a dust collector or vacuum to the dust-extraction port to keep your work area clean and improve air quality.

A reinforced back keeps the blade straight for better control and more precise cuts. These saws are also known as backsaws.

Style A is also known as a razor saw and has a replaceable, ultra-thin blade with fine teeth for cutting delicate parts. Reverse the blade to make pull cuts. These saws cut through wood, plastic, aluminum, and brass.

Style B has a heavy duty construction with a durable comfort handle for precise cuts such as dovetails in plywood and hardwood. The blade is not replaceable.