McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    32 Products

    Tabletop Mixer Stands

    Image of Product. Front orientation. Mixer Stands. Tabletop Mixer Stands.
    Mount small-batch mixers above batch cans and small containers. Mixers can be mounted at any height on the stand. Use with mixer shaft lengths up to 18".
    Shaft
    Base
    Dia.
    Material
    Wd.
    Dp.
    Material
    Ht.
    Each
    5/8"304 Stainless Steel
    14"14"Steel28"0000000000000
    3/4"304 Stainless Steel
    17"17"Steel28"000000000000

    Container-Mount Mixer Stands

    Image of Product. Front orientation. Mixer Stands. Container-Mount Mixer Stands.
    Clamp onto the rim of a container up to 15" in diameter. Mixers can be mounted at any height on the stand. Maximum mixer shaft length is the depth of the container plus 18".
    Shaft
    Base
    Dia.
    Material
    Wd.
    Dp.
    Material
    Ht.
    Each
    5/8"304 Stainless Steel
    14"14"Aluminum
    26"0000000000000

    Stand-Mount Air-Powered Mixers for Small Batches

    Image of System. Shown with Tabletop Stand (Sold Separately). Front orientation. Mixers. Stand-Mount Air-Powered Mixers for Small Batches.

    Shown with Tabletop

    Stand (Sold

    Separately)

    Clamp the 10" long bar of these mixers onto the vertical shaft of a stand (sold separately). A needle valve lets you adjust mixing speed. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
    For Thin Liquids—Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
    For Thick Liquids—Mixers for thick liquids are for liquids with a viscosity similar to honey and molasses. Also known as gear-drive mixers, they turn the propeller at low speeds.
    Mixers
    Replacement
    Air-Powered Motors
    Replacement
    Mixer Propellers
    Propellers
    Shaft
    Air
    Connection
    Power,
    hp
    Mixer Speed,
    rpm
    No.
    of
    Dia.
    Material
    Lg.
    Dia.
    Cap.,
    gal.
    Pipe
    Size
    Thread
    Type
    Gender
    Air Consumption
    @ Pressure
    Overall
    Ht.
    Wt.,
    lb.
    Includes
    Each
    Each
    Each
     
    For Thin Liquids
    1/3500 to 10,00012 1/2"316 Stainless Steel
    12"3/8"51/4
    NPT
    Male13 ft³/min @ 80 psi16 1/2"59/16" × 10" Lg. Bar
    Needle Valve
    00000000000000000000000000000000000000000
    1/3500 to 10,00012 1/2"316 Stainless Steel
    18"3/8"51/4
    NPT
    Male13 ft³/min @ 80 psi22 1/2"59/16" × 10" Lg. Bar
    Needle Valve
    00000000000000000000000000000000000000
    1/3500 to 10,00012 1/2"316 Stainless Steel
    24"3/8"51/4
    NPT
    Male13 ft³/min @ 80 psi28 1/2"59/16" × 10" Lg. Bar
    Needle Valve
    00000000000000000000000000000000000000
    1/3500 to 10,00012 1/2"316 Stainless Steel
    30"3/8"51/4
    NPT
    Male13 ft³/min @ 80 psi34 1/2"59/16" × 10" Lg. Bar
    Needle Valve
    00000000000000000000000000000000000000
    1/2500 to 7,00012 1/2"316 Stainless Steel
    12"3/8"261/4
    NPT
    Male27 ft³/min @ 80 psi16 3/4"59/16" × 10" Lg. Bar
    Needle Valve
    0000000000000———0000000000000
     
    For Thick Liquids
    1/315 to 17012 1/2"316 Stainless Steel
    12"3/8"51/4
    NPT
    Male13 ft³/min @ 80 psi22"79/16" × 10" Lg. Bar
    Needle Valve
    000000000000000———0000000000000
    1/3100 to 1,20012 1/2"316 Stainless Steel
    12"3/8"261/4
    NPT
    Male13 ft³/min @ 80 psi19 1/2"69/16" × 10" Lg. Bar
    Needle Valve
    0000000000000———0000000000000
    1/2100 to 1,00012 1/2"316 Stainless Steel
    12"3/8"261/4
    NPT
    Male27 ft³/min @ 80 psi20"69/16" × 10" Lg. Bar
    Needle Valve
    000000000000000———0000000000000
     
    Accessories and Replacements for Mixers

    Stand-Mount Electric Mixers for Small Batches

    Image of System. Shown with Tabletop Stand (Sold Separately). Front orientation. Mixers. Stand-Mount Electric Mixers for Small Batches.

    Shown with Tabletop

    Stand (Sold

    Separately)

    Clamp the 10" long bar of these mixers onto the vertical shaft of a stand (sold separately). Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing. An adjustment dial allows you to alter your mixing speed.
    For Thin Liquids—Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
    For Thick Liquids—Mixers for thick liquids are for liquids with a viscosity similar to honey and molasses. Also known as a gear-drive mixer, they turn the propeller at low speeds.
    Mixers
    Replacement
    Mixer Propellers
    Replacement
    Motor Brushes
    Propellers
    Shaft
    Power,
    hp
    Mixer Speed,
    rpm
    No.
    of
    Dia.
    Material
    Lg.
    Dia.
    Cap.,
    gal.
    Current
    Freq.,
    Hz
    Overall
    Ht.
    Wt.,
    lb.
    Features
    Includes
    Cord Lg.,
    ft.
    Motor Enclosure Type
    Each
    Each
    Pair
    120V AC Single Phase—3 Blade Plug
     
    For Thin Liquids
    1/4080 to 4,00012 1/2"316 Stainless Steel
    12"3/8"50.5 amp6020 1/4"6Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)00000000000000———00000000000000
    1/4080 to 4,00012 1/2"316 Stainless Steel
    18"3/8"50.5 amp6026 1/4"7Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)0000000000000———0000000000000
    1/4080 to 4,00012 1/2"316 Stainless Steel
    24"3/8"50.5 amp6032 1/4"8Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)0000000000000———0000000000000
    1/4080 to 4,00012 1/2"316 Stainless Steel
    30"3/8"50.5 amp6038 1/4"9Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)0000000000000———0000000000000
    1/1540 to 2,00012 1/2"316 Stainless Steel
    12"3/8"51.1 amp6021"8Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)000000000000000000000000000———0
    1/105 to 1,00012 1/2"316 Stainless Steel
    12"3/8"260.8 amp6025"9Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)0000000000000000000000000000———0
    1/10300 to 6,00012 1/2"316 Stainless Steel
    12"3/8"50.8 amp6021"9Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)000000000000000———0———0
    1/840 to 1,20012 1/2"316 Stainless Steel
    12"3/8"260.8 amp6023"12Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)000000000000000000000000000———0
     
    For Thick Liquids
    1/1510 to 35012 1/2"316 Stainless Steel
    12"3/8"131.1 amp6024"9Adjustment Dial9/16" × 10" Lg. Bar6Totally Enclosed Nonventilated (TENV)000000000000000000000000000———0
     
    Accessories and Replacements for Mixers

    No-Mess Drum Mixers

    Image of ProductInUse. Front orientation. Drum Mixers. No-Mess Drum Mixers.
    Eliminate spills and splatter by rotating your closed drum to mix its contents. Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust.
    Power,
    hp
    Mixer Speed,
    rpm
    Wt. Cap.,
    lb.
    Current
    Freq.,
    Hz
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Cord Lg.,
    ft.
    Features
    Includes
    Each
    120V AC
     
    Single Phase—Three-Blade Plug
    1/215 to 243007.4 amp6020"35"21"1753Adjustment DialChain and Guard
    Grounding Strap
    Two 3" Dia. Casters
    0000000000000000
     
    Accessories and Replacements for Drum Mixers

    Stand Mixers

    Image of Product. Front orientation. Stand Mixers.
    Mix adhesives, knead clays, and stir coatings. This mixer meets NSF/ANSI standards for use in food and beverage applications.
    No. of
    Speeds
    Max. Mixer
    Speed, rpm
    Current,
    amp
    Freq.,
    Hz
    Ht.
    Wd.
    Dp.
    Housing
    Material
    Container Material
    Food Industry
    Std.
    Includes
    Each
    120V AC Single Phase—3-Blade Plug
     
    7 qt. Capacity
    119004.26017 3/4"9 1/4"16 1/4"Aluminum
    303 Stainless Steel
    NSF/ANSI 8Aluminum Mixing Paddle, Stainless Steel Mixing Paddle, Splash Guard with Feed Chute0000000000000
     

    Hazardous Location No-Mess Drum Mixers

    Image of ProductInUse. Front orientation. Drum Mixers. Hazardous Location No-Mess Drum Mixers.
    Motor is UL listed for use in environments with flammable gases and combustible dust. This mixer eliminates spills and splatter by rotating your closed drum to mix its contents.
    Power,
    hp
    Mixer Speed,
    rpm
    Wt. Cap.,
    lb.
    Current
    Freq.,
    Hz
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Hazardous Location Rating
    Features
    Includes
    Each
    120V AC/240V AC
     
    Single Phase—Wire Leads
    1/215 to 243007.4 amp/3.7 amp6020"35"21"183NEC Class I Divisions 1, 2 Group D
    NEC Class II Divisions 1, 2 Groups F, G
    Adjustment DialChain and Guard
    Grounding Strap
    Two 3" Dia. Casters
    0000000000000000
     
    Accessories and Replacements for Drum Mixers
    back to top