Mount these lights high on exterior walls to improve nighttime visibility and deter intruders. Each head adjusts to any angle, so you can aim the beam where you need it. These lights can be used in wet locations.

Select a light appearance to match your existing lighting. If you’re not sure what temperature you need, choose a light with a selectable light appearance. You can adjust the temperature with a switch.

Lights with both a light and motion sensor turn on only when they detect movement after dark.

Lights rated IP65 are sealed against dust and moisture, so they’ll stand up to sprinklers and heavy rain.

Point these lights toward paths, doorways, and other dark areas. Since they run on batteries, you can skip the hassle of running wires. They only turn on when they sense motion, so the batteries last longer than they do in lights that are always on. These lights are rated IP06—they’re sealed for protection from wet weather.

See what’s happening outside your facility—day and night. These lights have a built-in video camera that records when they sense motion. When it’s dark, the LED heads activate at the same time to illuminate the area. The speaker has two-way audio, so you can talk to the person on camera. You can also blast a siren through the speaker to deter a potential intruder. Rated for use in wet locations, these lights hold up to rain and humidity.

Download the free app to your mobile device to control these lights via Wi-Fi. Use the app to adjust settings, set up notifications, schedule lights to turn on and off, and review footage. Because videos are stored on the included 128 GB microSD card, you don’t need to pay for a subscription to view them. The app alerts you when storage is low. If it runs out, new videos record over the oldest ones.

Bring light to your parking lot or walkway in minutes—these lights come wired and already attached to a lightweight pole. All you have to do is unfold the light head and secure it with a single screw, mount the pole to your existing anchor bolts, and connect them to your power source. The baseplate works with common anchor bolt patterns. If you don’t have existing anchor bolts, set the included ones in concrete.

Once these lights are up and running, a light sensor turns them on at dusk and off at dawn. A motion sensor brightens them when someone walks by at night, and they’ll dim again after 30 minutes of inactivity. Download the free app to your mobile device to adjust the light and motion sensor settings via Bluetooth.

Choose lights with one head for roadways and the edges of parking lots. Choose lights with two heads for the center of parking lots and other large areas.

16 ft. high lights are rated for 3 second wind gusts up to 120 mph per AASHTO specifications. They meet wind zone standards for all inland and U.S. coastal areas except South Florida. 20 ft. high lights are rated for 3 second wind gusts up to 90 mph per AASHTO specifications. They meet inland wind zone standards.

Hang these lights in garages and covered walkways to create a safe, well-lit path. They’re also known as canopy lights. All are either UL or ETL Listed for use in wet locations. Select a light appearance to match your existing lighting. If you’re not sure what temperature you need, choose a light with a selectable light appearance. You can adjust the temperature with a switch.

Fasten these lights to a ceiling or to an outlet box. Styles A-C can also be suspended like a pendant from conduit.

Lights with a light sensor automatically turn on in low light conditions. Lights with a motion sensor stay dim until movement is detected, saving energy.

Lights rated IP65 are sealed to keep out dust and driving rain.

Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement. They’re commonly used in hallways and small storage spaces.

Lights with rechargeable batteries stay on for 3 minutes after motion stops. Their mounting plate attaches to surfaces with the included fasteners or adhesive. The light connects to the mounting plate with magnets, so it’s easy to take off when it’s time to charge. You can also attach the light directly to any magnetic surface. The polycarbonate lens resists impacts. These lights cannot be sold to Canada due to energy efficiency requirements.

Lights with disposable batteries stay on for 20 seconds after motion stops. Rated IP04, they’re sealed to keep out splashing and dripping water. They’re also CE marked to meet European safety standards.

Hardwired lights are configurable. Set them to turn off after 30 or 180 seconds. Select a warm, neutral, or cool light appearance to fit your environment. For spaces that occasionally get natural light, you can set these lights to stay off when there’s sufficient ambient light. Turn off the sensor to use them as regular ceiling lights.

Neutral lights are often found in workspaces. Warm lights have a yellow tone similar to incandescent lights. Cool lights highlight white and blue tones. This is ideal for inspection areas, workshops, and other areas that require high visibility.

Light up spaces that have no electrical connection or are difficult to wire, such as sheds and closets. Pop these lights into the included magnetic mounting brackets or hang them by their hooks—they’re easy to remove when it’s time to charge. To save battery, they have a motion sensor, so they only light up when they detect movement. They emit a neutral white light through a clear lens, providing bright, focused lighting so you can quickly find what you need. The lens is made of polycarbonate for impact resistance. UL listed for use in damp locations, these lights can handle humidity and moisture.

These lights cannot be sold to Canada due to energy efficiency requirements.

No need for wiring—these lights plug into a standard wall outlet. Also known as shop lights, they suspend from your ceiling or can be surface mounted with the included hardware. Their smooth, frosted lens disperses light and reduces glare. Since the lens is polycarbonate, these lights stand up to bumps. ETL listed for use in damp locations, they also withstand humidity and moisture.

Styles B-D can be chained together by plugging their power cord into the power outlet on the previous light. Style B save energy by using a motion sensor to turn on only when the room is occupied. Adjust everything from brightness to sensor range to timer duration with the included remote.

Neutral lights are often found in workspaces.

Create long rows of lights in indoor workspaces without having to hardwire one unit to another. Connectors affix these lights to each other—choose a butt connector for an uninterrupted row or a cable connector to space them apart (both sold separately). All mount directly to the ceiling or wall. They require a power cord (sold separately).

Style A lights have adjustable brightness and light appearance, so you can match your existing lighting. They come with v-hooks, so you can add your own chain to suspend them. Add suspension hardware or mounting brackets (both sold separately) for a polished look.

Lights with a motion/light sensor turn on when they detect movement and turn off after a set period to reduce energy costs. They automatically dim the light when there is adequate daylight. They can control up to 10 connected lights. Add a remote control to adjust other settings, such as how long lights stay on after detecting motion or how much daylight will cause them to dim. Lights with a backup battery meet UL 924, which means they'll keep shining for at least 90 minutes if the power goes out.

Wire these lights end-to-end to create long rows that brighten indoor workspaces such as offices and workshops. To connect them, remove the lens and knockouts on each light, then feed the included wires with push-in connectors through the knockouts—no complex wiring needed. A frosted lens evenly disperses light and reduces some glare. Use the external switch to adjust brightness and choose between neutral and cool light.

Mount these lights to your ceiling or wall with the included hardware. A bracket connects the ends to keep the row in a straight line. To suspend them, hang them from chain (not included) with the included V-hooks. You can also add suspension hardware (sold separately), which includes two wire rope slings with hooks and two wire rope clamps. You can adjust the length and tighten the clamps without any tools.

Lights made outside of the U.S. are UL listed to withstand humidity and moisture in damp locations. Add either of the controllers (both sold separately) to sync multiple of these lights together. They form a secure Bluetooth network when you place any two controllers within 100 ft. of each other. Use the free app on your smartphone or tablet to program when lights turn on and off and how they respond to sensors. Controllers with a motion and light sensor automatically adjust lighting based on occupancy and natural light.

Light diffuses evenly from the sides and bottom to produce ambient lighting. These fixtures are ideal for offices, storage rooms, and other indoor spaces. Rated for use in damp locations, they withstand humidity and moisture.

Style E can function as a regular light or use the built-in motion sensor to turn on only when motion is detected. These lights link easily using the included cables—no knockouts or conduit required. Connect up to eight lights on a single circuit.

Add suspension hardware (sold separately) for an alternative to surface mounting.

Often used in stairwells and hallways, these lights save energy by only turning on when they sense movement. Once movement stops, they’ll dim or turn off completely—choose your preference with the controls in front. You can also adjust the light duration and sensor range. These lights are DLC (DesignLight Consortium) listed, so they’ve been tested to confirm their energy efficiency.

Choose between a neutral or cool light appearance on the LED driver to match existing lights. To minimize glare, the frosted lens disperses light evenly. It’s also made of polycarbonate to resist impact.

All are UL listed to resist humidity and moisture, so they’ll work in damp locations. Lights with a backup battery shine a 1,000 lumen light for 90 minutes if the power goes out.

With more surface area than round bay lights, these fixtures produce softer light with less glare. Use them to replace old fluorescent lights and illuminate large, open areas with high ceilings. Rated for use in damp locations, these lights withstand humidity and moisture.

Lights with a narrow beam direct light downward, so they’re good for confined spaces such as warehouse aisles.

Lights with a motion sensor turn on when people or vehicles are present.

Styles B-D have thermally protected drivers and larger heat sinks than other bay lights, so they’ll last longer at higher temperatures. Their LEDs have a consistent color temperature, which helps maintain a uniform appearance across multiple lights.

Style B lights are compatible with an emergency backup battery (sold separately), so they’ll stay lit for 90 minutes if the power goes out. The battery meets UL 924 standards.

IP or NEMA rated, these lights have a sealed lens to keep dust and moisture out for protection against washdowns. All meet ETL or UL standards for wet locations.

Mount these lights to the ceiling with the included brackets. For lights with mounting V-hooks, you can suspend them from the ceiling with chains (not included).

Styles A-B have a wraparound lens that allows light to shine from the sides as well as the bottom. Lights with a backup battery stay illuminated for at least 90 minutes during a power outage in compliance with UL 924.

IP65 lights withstand light rinses. NEMA 4X lights withstand corrosive liquids and spraying water—including washdowns.

Lights that meet NSF/ANSI 2 standards are commonly used in food handling and processing areas with splashing liquid.

Brighten enclosures and small spaces like closets and drawers—no hardwiring or outlets needed. Powered by a rechargeable battery, these lights are easy to install and help save on maintenance costs. Stick the adhesive-backed metal mounting plates to any surface where you need light. The light snaps onto the plates—and off when it’s time for charging.

A motion sensor turns these lights on when you open the door or wave your hand. Choose between two modes for turning off the light: a two-minute timer or a hand wave. In timer mode, the light also turns off when the door is closed.

Improve visibility inside enclosures and control cabinets so it’s easier to trace wires, swap relays, check connections, and more. These lights have an impact-resistant plastic lens that protects the LEDs. Each light has a 2-pin connector on both ends, so you can plug in a power cord or a connecting cord (both sold separately) to link multiple lights together in a large cabinet. You can also make your own power cord or connecting cord using screw terminal connectors (sold separately) and your own 16/2 cable.

Lights with a motion sensor turn on automatically when the door opens—no wiring to a door switch necessary. Position the sensor so it has a clear view of the door.

When linked together, lights with a motion sensor or switch turn on and off independently.

Lights with a magnetic mount cling to most metal panels and can be repositioned and removed. Pop them off to use them as a portable light inside your enclosure—just leave some slack in the cable to move them around.

Illuminate your electronics cabinets and racks with long-lasting LED lights. These lights are efficient and won’t add heat to your cabinet, protecting your electronics. Turn on the lights with either the switch or the motion sensor, which saves energy by lighting the cabinet only when you’re working. Connect a door switch (sold separately) to turn the light on when the door is open, like a refrigerator.

These lights are designed for rails with square holes and snap in without tools. If your cabinet or rack is exposed to vibration and movement, anchor the lights with screws for extra security. A rotating socket helps fit the power cable in crowded spaces.

Light up drawers and enclosures where power isn’t available—these lights are compact and powered by battery. They turn on when they detect motion, then turn off 15 seconds after movement stops. Mount them to any magnetic surface, or use the adhesive-backed mounting plate to hold them in place. Either way, just pull them from your enclosure to charge using the included USB-C cable.

Tuck these low-profile lights under cabinets for focused, spotlight-like illumination. They’re ideal for highlighting areas or shelves your ceiling lights can’t reach. All are for indoor use. You can link multiple lights together using the included connecting cables. Brightness settings are saved for the next time you turn the lights on.

Adhesive-back/fastener-mount lights have adhesive strips for quick mounting. They also have a mounting hole and screw for permanent installation. Turn them on or off without touching them—just wave your hand over the motion sensor.

Detect leaks and contamination while keeping both your hands free. These headlamps use UV light to reveal dyes, particles, and chemicals with fluorescent qualities, making cracks and defects easy to spot. Each headlamp also has a regular LED light to see in dim and dark areas. Both bulbs emit a focused, uniform light beam that works best for close-up inspections.

Headlamps with a motion sensor switch between brightnesses, beam patterns, and bulb types with a wave of your hand. They’re helpful when your gloves are oily or dirty. You can also press a button to switch between these modes. The additional bull’s eye beam pattern has a wide angle to illuminate at a distance.

Monitor passersby and trespassers with light and an alert. For facility security, these light controls notify you on a smartphone app when they sense motion and turn on. You can also use the app to link additional lights and configure which lights turn on when movement is detected. Also known as occupancy sensors, they use an infrared sensor to detect changes in heat sources, so they need a direct view of people. The included mounting bracket swivels 90°, so you can install them on your wall or ceiling.