A small hex size makes these high-flow mufflers a great fit for cramped spaces.

Made entirely of stainless steel, these mufflers stand up to harsh, corrosive environments.

Adjust flow by turning the screw, then tighten the hex nut with a wrench to secure.

In addition to a filter, these mufflers have a wool felt disc to trap oil mist.

These mufflers exhaust through narrow holes on one end to provide a concentrated blast of air. Use them to eject items from your conveyor and direct exhaust away from delicate applications.

Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. They reduce noise by 35-42 dB.

Don’t let an unexpected clog interrupt your work. These mufflers have a filter that slides up slowly as it clogs to indicate when the muffler should be replaced. They reduce noise by 30-35 dB.

Clean the air going into small blowers and air-powered equipment in tight spaces.

With a threaded connection on both ends, these filters can be installed anywhere in your pipeline to keep dust and debris out of your system.

Also known as egg crate, these sheets have peaks and valleys that absorb more sound at higher frequencies than flat-surface sheets. Use them to quiet noisy areas and line machine enclosures. Sheets are made of humidity-resistant polyurethane foam.

This insulation meets UL 94HF1 and ASTM E162 for flame retardance, and ASTM E662 for smoke output. Use to quiet noisy areas and line machine enclosures. Sheets are made of polyimide foam.

Grommets along one side make it easy to install these sheets around your facility and quiet noisy areas. Made of vinyl-coated fiberglass, they resist abrasion, oil, dirt, moisture, and most solvents.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.

These polypropylene foam sheets will not degrade if exposed to moisture and occasional salt water spray. Use them to quiet noisy areas and line machine enclosures.

Install these adhesive-back sheets to reduce noise from vibrating surfaces, such as duct and equipment housings.

Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.

Reflect sound and block noise from traveling to other parts of your facility.

Control the flow of exhaust air while also regulating the exhaust air speed. These valves dump exhaust air to the atmosphere without routing it back through a directional control valve. The 90° elbow shape allows you to install them in tight spaces. Also known as quick exhaust valves.

Choose the pressure range you need. When these valves receive an air signal, they quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. They're often used with air compressors that require continuous operation. Also known as quick exhaust valves.

Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.

Reduce rattles and squeaks between parts with this abrasionresistant flocked tape. The acrylic adhesive sticks even on hard-to-bond plastics.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

Reduce noise and vibration in chutes, bins, and similar delivery systems with this UHMW-faced foam tape.