Shape Shape |
---|
![]() | Sheet and Bar |
![]() | Rod and Disc |
System of Measurement System of Measurement |
---|
|
Appearance Appearance |
---|
|
Tolerance Rating Tolerance Rating |
---|
|
Yield Strength Yield Strength |
---|
|
Hardness Hardness |
---|
|
Certificate Certificate |
---|
![]() | |
Surface Resistivity Surface Resistivity |
---|
|
Thermal Conductivity Thermal Conductivity |
---|
|
Density Density |
---|
|
Modulus of Elasticity Modulus of Elasticity |
---|
|
Melting Point Temperature Melting Point Temperature |
---|
|
Fabrication Fabrication |
---|
|
More
A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
6" × 6" | 12" × 12" | ||||
---|---|---|---|---|---|
Thick. | Thick. Tolerance Range | Each | Each | ||
1/4" | -0.02" to 0.02" | 0000000 | 000000 | 0000000 | 0000000 |
1/2" | -0.05" to 0.05" | 0000000 | 000000 | 0000000 | 000000 |
3/4" | -0.056" to 0.056" | 0000000 | 000000 | 0000000 | 000000 |
1" | -0.066" to 0.066" | 0000000 | 000000 | 0000000 | 000000 |
1 1/4" | -0.076" to 0.076" | 0000000 | 000000 | 0000000 | 000000 |
1 1/2" | -0.076" to 0.076" | 0000000 | 000000 | 0000000 | 00000000 |
Wd. | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/4" Thick. (-0.005" to 0.005" Tolerance) | |||||
---|---|---|---|---|---|
1" | 1/2" per 10 ft. | 0000000 | |||
1 1/2" | 1/2" per 10 ft. | 0000000 | |||
3/8" Thick. (-0.005" to 0.005" Tolerance) | |||||
4" | 1/2" per 10 ft. | 0000000 | |||
1/2" Thick. (-0.005" to 0.005" Tolerance) | |||||
1/2" | 1/2" per 10 ft. | 0000000 | |||
1" | 1/2" per 10 ft. | 0000000 | |||
1 1/2" | 1/2" per 10 ft. | 0000000 | |||
2" | 1/2" per 10 ft. | 0000000 | |||
2 1/2" | 1/2" per 10 ft. | 0000000 | |||
3" | 1/2" per 10 ft. | 0000000 | |||
5/8" Thick. (-0.006" to 0.006" Tolerance) | |||||
5/8" | 1/2" per 10 ft. | 0000000 | |||
3/4" Thick. (-0.006" to 0.006" Tolerance) | |||||
3/4" | 1/2" per 10 ft. | 0000000 | |||
1" | 1/2" per 10 ft. | 0000000 | |||
1 1/2" | 1/2" per 10 ft. | 0000000 | |||
3" | 1/2" per 10 ft. | 0000000 | |||
1" Thick. (-0.006" to 0.006" Tolerance) | |||||
1" | 1/2" per 10 ft. | 0000000 | |||
1 1/4" | 1/2" per 10 ft. | 0000000 | |||
1 1/2" | 1/2" per 10 ft. | 0000000 | |||
2" | 1/2" per 10 ft. | 0000000 | |||
3" | 1/2" per 10 ft. | 0000000 | |||
1 1/2" Thick. (-0.007" to 0.007" Tolerance) | |||||
1 1/2" | 1/2" per 10 ft. | 0000000 | |||
2" Thick. (-0.007" to 0.007" Tolerance) | |||||
2" | 1/2" per 10 ft. | 0000000 |
One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints. The brushed side comes covered with a protective peel-off film. A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Thick. | Thick. Tolerance Range | Mechanical Finish | Flatness Tolerance | Each | |
12" × 12" | |||||
---|---|---|---|---|---|
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
12" × 24" | |||||
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
24" × 24" | |||||
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
Polished on one side to a reflective, mirror-like finish, these sheets come covered with a protective peel-off film. A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Thick. | Thick. Tolerance Range | Mechanical Finish | Flatness Tolerance | Each | |
12" × 12" | |||||
---|---|---|---|---|---|
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
12" × 24" | |||||
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
24" × 24" | |||||
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Dia. | Dia. Tolerance Range | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
3/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
1/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
5/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
3/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
7/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
1/2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
9/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
5/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
3/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
7/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
1" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
1 1/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
1 1/2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 |
Also known as high-leaded naval brass, 485 brass contains lead for good machinability. It is commonly used for marine hardware, valve stems, and screw machine products.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Dia. | Dia. Tolerance Range | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
3/16" | -0.002" to 0.002" | 0000000 | |||
1/4" | -0.002" to 0.002" | 0000000 | |||
5/16" | -0.002" to 0.002" | 0000000 | |||
3/8" | -0.002" to 0.002" | 0000000 | |||
7/16" | -0.002" to 0.002" | 0000000 | |||
1/2" | -0.002" to 0.002" | 0000000 | |||
5/8" | -0.002" to 0.002" | 0000000 | |||
3/4" | -0.002" to 0.002" | 0000000 | |||
7/8" | -0.002" to 0.002" | 0000000 | |||
1" | -0.002" to 0.002" | 0000000 | |||
1 1/8" | -0.003" to 0.003" | 0000000 | |||
1 1/4" | -0.003" to 0.003" | 0000000 | |||
1 3/8" | -0.003" to 0.003" | 0000000 | |||
1 1/2" | -0.003" to 0.003" | 0000000 | |||
1 3/4" | -0.003" to 0.003" | 0000000 | |||
2" | -0.003" to 0.003" | 0000000 | |||
3" | -0.005" to 0.005" | 0000000 |