Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Create a streamlined appearance—the flat face lies flush with your wall plate.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Suitable for use outdoors, receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection.

Add a fuse to protect equipment from current overload.

Charge mobile devices without an adapter.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Prevent damage to electronic equipment caused by spikes in voltage.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Keep personnel safe from electric shock by adding ground fault protection to all outlets on the same circuit. These receptacles mount to DIN rail.

Also known as hospital-grade receptacles, these have an extra-tight fit when mated to withstand high vibration. They prevent damage to electronic equipment caused by spikes in current. Mount to DIN rail.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

Designed for indoor applications, these cords are often used to power appliances.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

Designed for indoor use, these cords are often used to power appliances.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Keep personnel safe from electric shock with these cords.

A locking lever on the female socket prevents your device from disconnecting.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

With a rubber housing, these outlet strips withstand drops and other impact.

Install these outlet strips in an opening in workbenches, tables, and other furnishings; the outlets lie flush with the surface for a seamless appearance.

Install these extra-long strips onto the frame of an electrical cabinet.

Mount these strips into standard 19" wide electronics racks and enclosures.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

Minimize the risk of electric shock by adding ground fault protection to a standard outlet.