Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Receptacles for outlet boxes fit standard wall plates (not included).

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Create a streamlined appearance—the flat face lies flush with your wall plate. Receptacles fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Access the wire connection by opening the hinged housing. The housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Check the status of your ground connection—a green light signals that connectors have power and are safely grounded. A red light indicates power only. The lights are visible from any angle for quick identification.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments. The housing is impact-resistant plastic.

Plugs and sockets are clear so you can view wire connections. 90° elbow plugs have a rotating face to plug in at any angle.

Duplex receptacles fit standard wall plates (not included).

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

All connectors have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals. When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Connectors that meet IP69K resist high-pressure washdowns.

Plugs mate with female receptacles and female sockets with an attached cover.

Male receptacles mate with female sockets without an attached cover.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

A rubber housing protects these connectors from damage caused by drops and impact. They are not intended for use in wet or damp environments.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. The housing is impact-resistant plastic.

Receptacles fit standard wall plates (not included).

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 6P, 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying; temporary submersion; high-pressure, high-temperature washdowns; and are corrosion resistant so they can be used in marine environments.

Plugs have a multiple-ring seal to keep out liquid when mated. They have a locking ring that screws together with sockets and receptacles so connections remain secure in high-vibration applications such as oil drilling and mining operations.

Sockets and receptacles have an attached cover that creates a watertight seal when not in use.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Use SJT cords in dry or damp environments.

Change the connection style between an outlet and your equipment.

STW and SJTW adapters have a water-resistant outer insulation.

For technical drawings and 3-D models, click on a part number.

Designed for indoor applications, these cords are often used to power appliances. The industry designation is SPT, so they have a flat cord shape.

Cords with a 90° elbow plug fit flush against a wall outlet for use behind machinery or in areas where space is tight.

Run these cords through high-traffic areas in dirty and greasy environments. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

SOOW cords have both an outer and inner insulation that resists oil, making them more durable than SEOW cords, which only have an outer insulation. SOOW cords also have impact-resistant connectors.