Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. These connectors turn to lock together when mated to prevent accidental disconnection.

Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

These receptacles are for light-duty use.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.

Minimize the risk of electric shock and electrical fires with a single receptacle.

Charge mobile devices without an adapter.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

Keep personnel safe from electric shock by adding ground fault protection. These receptacles have an extra-tight fit when mated with plugs to withstand high vibration. Also known as hospital grade receptacles.

A rubber housing protects these connectors from damage caused by drops and impact.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Power multiple devices from one power source.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

Swap the plug to match the outlet of the region you’re in instead of using separate cords for each country. These adapter cords convert AC voltage to power DC electronics.

Plug these cords into a vehicle socket to charge devices that run on AC voltage.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Keep personnel safe from electric shock with ground fault protection.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

These curved outlet strips clamp onto a pole or table leg.

Install these extra-long strips onto the frame of an electrical cabinet.

Bring power to workstations that are not near a wall—these poles mount from the ceiling.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Give the connectors on these cords a quarter turn to lock in place.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Designed for indoor use, these cords are often used to power appliances.

In addition to an outlet on the end, these cords have multiple inline outlets.

Keep personnel safe from electric shock with these cords.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Add grounding or surge suppression protection.

Power devices that have a straight-blade connection from a vehicle outlet.