Made from a blend of cork and rubber, this material is commonly used for low-pressure applications.

This neoprene gasket material is reinforced with a nylon insert to prevent it from losing shape while under pressure up to 1,000 psi.

Made of neoprene rubber, these washers resist oil.

Made from FDA-listed materials for use with food.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

For every 1/4" of thickness there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.

Use neoprene cord stock to make O-rings for applications that come into contact with water.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Sample multiple sizes and styles of rubber trim.

A dense seal helps control noise.

Avoid scuffing your floor and reduce wear on your seals—this weatherstripping has a plunger that lowers the seal as the door is closed and raises it as the door is opened.

Close the gap between the bottom of an overhead door and the floor.

Create a stronger seal than metal or rubber alone. These one-piece washers are metal for strength with a bonded rubber seal that creates a tight grip.