Economy Indexable Turning Tools
These tools come with carbide inserts installed. When one edge of the insert dulls, rotate it to use a sharp edge. When all edges dull, replace the insert rather than the whole tool. Right-handed tools cut from right to left and left-handed tools cut from left to right.
Style A tools cut a sharp 90° square shoulder.
Style B tools are suitable for roughing cuts, interrupted cuts, and cuts where a square shoulder is not required.
For technical drawings and 3-D models, click on a part number.
Shank | Cutting Edge Angle | Insert | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tool Bit Code | Wd. | Ht. | O'all Lg. | Material | Side | End | For Use On | Code | Inscribed Circle Dia. (IC) | Thick. | Includes | Each | |
Style A—Right Hand | |||||||||||||
| AR-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | 00000000 | 000000 |
| AR-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| AR-10 | 5/8" | 5/8" | 4" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| AR-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
Style A—Left Hand | |||||||||||||
| AL-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | 00000000 | 00000 |
| AL-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| AL-10 | 5/8" | 5/8" | 4" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| AL-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
Style B—Right Hand | |||||||||||||
| BR-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 15° | 45° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | 00000000 | 00000 |
| BR-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 15° | 45° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| BR-10 | 5/8" | 5/8" | 4" | Carbon Steel | 15° | 45° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| BR-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 15° | 45° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
Style B—Left Hand | |||||||||||||
| BL-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 15° | 45° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | 00000000 | 00000 |
| BL-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 15° | 45° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| BL-10 | 5/8" | 5/8" | 4" | Carbon Steel | 15° | 45° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| BL-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 15° | 45° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
Uncoated | Titanium Nitride (TiN) Coated | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Each | Each | |||||||||
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | 1-9 | 10-Up | 1-9 | 10-Up | ||
For Use On Aluminum, Brass, Bronze | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 000000 | 00000 | 000000 | 00 | 00 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | 00000000 | 00000 | 0000 | 000000 | 00 | 00 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 0000 | 000000 | 00 | 00 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | 00000000 | 00000 | 0000 | 000000 | 00 | 00 |
For Use On Steel | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 00000 | 0000 | 00000000 | 000000 | 000000 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | 00000000 | 00000 | 0000 | 00000000 | 00000 | 00000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 0000 | 00000000 | 00000 | 00000 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | 00000000 | 00000 | 0000 | 00000000 | 00000 | 00000 |
Economy Indexable Turning Tool Sets
These tools come with carbide inserts installed. When one edge of the insert dulls, rotate it to use a sharp edge. When all edges dull, replace the insert rather than the whole tool. Right-handed tools cut from right to left, left-handed tools cut from left to right, and neutral tools can cut in either direction.
Style AR and AL tools perform along-the-length turning, facing, boring, and chamfering. They allow for a sharp 90° square shoulder.
Style BR and BL tools perform along-the-length turning, facing, boring, and chamfering. They are suitable for roughing cuts, interrupted cuts, and cuts where a square shoulder is not required.
Style E tools are for external threading.
For technical drawings and 3-D models, click on a part number.
Shank | Insert | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | O'all Lg. | No. of Pieces | Includes | Material | For Use On | Code | Inscribed Circle Dia. (IC) | Thick. | Each | |
| 3/8" | 3/8" | 2 1/2" | 5 | Five TPMT-221 Inserts One AR-6 right hand lathe tool One AL-6 left hand lathe tool One BR-6 right hand lathe tool One BL-6 left hand lathe tool One E-6 neutral lathe tool Wood Stand | Carbon Steel | Steel | TPMT-221 | 1/4" | 1/8" | 00000000 | 0000000 |
| 1/2" | 1/2" | 3 1/2" | 5 | Five TPMT-321 Inserts One AR-8 right hand lathe tool One AL-8 left hand lathe tool One BR-8 right hand lathe tool One BL-8 left hand lathe tool One E-8 neutral lathe tool Wood Stand | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | 00000000 | 000000 |
| 5/8" | 5/8" | 4" | 5 | Five TPMT-321 Inserts One AR-10 right hand lathe tool One AL-10 left hand lathe tool One BR-10 right hand lathe tool One BL-10 left hand lathe tool One E-10 neutral lathe tool Wood Stand | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | 00000000 | 000000 |
| 3/4" | 3/4" | 4 1/2" | 5 | Five TPMT-321 Inserts One AR-12 right hand lathe tool One AL-12 left hand lathe tool One BR-12 right hand lathe tool One BL-12 left hand lathe tool One E-12 neutral lathe tool Wood Stand | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | 00000000 | 000000 |
Uncoated | Titanium Nitride (TiN) Coated | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Each | Each | |||||||||
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | 1-9 | 10-Up | 1-9 | 10-Up | ||
For Use On Aluminum, Brass, Bronze | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 000000 | 00000 | 000000 | 00 | 00 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | 00000000 | 00000 | 0000 | 000000 | 00 | 00 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 0000 | 000000 | 00 | 00 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | 00000000 | 00000 | 0000 | 000000 | 00 | 00 |
For Use On Steel | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 00000 | 0000 | 00000000 | 000000 | 000000 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | 00000000 | 00000 | 0000 | 00000000 | 00000 | 00000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 0000 | 00000000 | 00000 | 00000 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | 00000000 | 00000 | 0000 | 00000000 | 00000 | 00000 |
Economy Indexable Threading Tools
A carbide insert comes installed on these tools. When one point of the insert dulls, rotate it to use a sharp point. When all points dull, replace the insert rather than the whole tool. A neutral cut direction means these tools can cut from either right to left or left to right.
For technical drawings and 3-D models, click on a part number.
Tool Bit | Shank | Thread | Insert | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Code | Wd. | Ht. | O'all Lg. | Type | Shape | Angle | Material | For Use On | Code | Inscribed Circle Dia. (IC) | Thick. | Includes | Each | |
Neutral | |||||||||||||||
| E | E-10 | 5/8" | 5/8" | 4" | UNC, UNS, UNF | V | 60° | Steel | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 000000 |
| E | E-12 | 3/4" | 3/4" | 4 1/2" | UNC, UNS, UNF | V | 60° | Steel | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
| E | E-6 | 3/8" | 3/8" | 2 1/2" | UNC, UNS, UNF | V | 60° | Steel | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | 00000000 | 00000 |
| E | E-8 | 1/2" | 1/2" | 3 1/2" | UNC, UNS, UNF | V | 60° | Steel | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 |
Uncoated | Titanium Nitride (TiN) Coated | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Each | Each | |||||||||
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | 1-9 | 10-Up | 1-9 | 10-Up | ||
For Use On Aluminum, Brass, Bronze | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 000000 | 00000 | 000000 | 00 | 00 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 0000 | 000000 | 00 | 00 |
For Use On Steel | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 00000 | 0000 | 00000000 | 000000 | 000000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 0000 | 00000000 | 00000 | 00000 |