Flame- and Arc-Flash Cold-Protection Face Masks
These face masks meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These hats are made of abrasion-resistant aramid/viscose blend fabric, which keeps you warm without accumulating moisture.
| Material | Arc Rating, cal/cm2  | Arc Rated PPE Category | Specifications Met | Color | Size | Each | |
| Aramid/Lyocell Fabric Blend | 10 | 2 | NFPA 70E | White | One Size | 00000000 | 000000 |
Flame- and Arc-Flash-Protection Rain Suits
These suits meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These suits are made of PVC-coated Nomex aramid. Jackets have snaps down the front and a storm flap to keep rain out. Sleeves have hook and loop cuffs; tighten to fit your wrist or expand to wear over gloves. The bib overalls have adjustable suspenders to modify the length.
When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.
Available Sizes | |||
|---|---|---|---|
| Size | Chest Size | Waist Size | Inseam Lg. |
| M | 50" | 46" | 29" |
| L | 54" | 50" | 30" |
| XL | 58" | 54" | 31" |
| 2XL | 62" | 58" | 32" |
| 3XL | 66" | 62" | 32" |
High-Visibility Flame- and Arc-Flash-Protection Sweatshirts
The fluorescent yellow fabric and reflective stripes on these sweatshirts make you stand out. They meet Class 3 ANSI/ISEA 107 standards for high-visibility clothing, so you’ll be seen from ¼ mile away. These sweatshirts also meet Category 3 NFPA 70E and NFPA 2112 for moderate protection against flames and electrical arc flashes. Made with a modacrylic/aramid blend, these sweatshirts are both durable and comfortable. To help prevent body heat from escaping, they have snug knit cuffs and a snug knit waistband. Keep your hands warm in the exterior pocket. They have an interior pocket for storage.
When choosing clothing to protect you from arc flashes, match the arc rated personal protective equipment (PPE) category required by your workplace.
Available Sizes | |
|---|---|
| Size | Chest Size |
| M | 38" |
| L | 41" |
| XL | 45" |
| 2XL | 50" |
| 3XL | 54" |
| Arc Rated PPE Category | Arc Rating, cal/cm2 | Visibility Rating | Material | Cuff Style | Specifications Met | Features | Color | Choose a Size | Each | |
| 3 | 27 | ANSI Class 3 | Modacrylic/Aramid Fabric Blend | Knit | NFPA 70E, NFPA 2112, ANSI/ISEA 107 | Knit Waistband, One Waist Pocket, One Inside Pocket | Fluorescent Yellow | 00000000 | 0000000 |
Welding Face Masks
These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks. They are designed to meet NFPA 1971 standards for structural firefighting. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.
Nomex aramid is heavier than PBI, yet breathable and moisture wicking. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. This is the most common PPE category for standard industrial applications.
| Application | Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Specifications Met | Color | Size | Each | |
| Welding, Electrical Protection, Flame Resistant, Heat Protection | Nomex Aramid Fabric | 10 | 2 | NFPA 70E, NFPA 1971 | White | One Size | 00000000 | 000000 |
Respirator Hoods
Replace your respirator hood or swap it out for a new style. Select a hood compatible with your respirator for a comfortable, loose fit.
Bullard GR50 series hoods are made with Nomex fabric, which is extra durable while still being lightweight and comfortable. They protect you better than hoods made from Tychem 2000 in grinding and sparking applications as well as at high temperatures.
Hoods | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lens | Breathing Tubes for Powered Air-Purifying Respirators | Breathing Tubes for Supplied-Air Respirators | ||||||||||||
| Manufacturer Model No. | Assigned Protection Factor | Hood Material | Material | Ht. | Wd. | Clothing Size | Hat Size | Features | Each | Each | Each | |||
Bullard GR50 Series | ||||||||||||||
| GRH | 1,000 | Nomex Fabric | Polycarbonate Plastic | 6 1/2" | 16 1/2" | One Size | 6 1/2-8 | Inner Bib, Outer Bib, Sewn-In Lens | 0000000 | 0000000 | 0000000 | 000000 | 00000000 | 000000 |
Aluminized Hoods for Heat Protection
Protect your head and neck from extreme heat. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.
Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It combines good heat resistance with excellent abrasion and cut resistance. It provides protection against molten metal splashes.
Sawdust Hoods for Miter Saws
Contain the sawdust flying off your miter saw for quick cleanup. These hoods funnel sawdust toward a vacuum port to keep your air and workstation clean. Connect them to a shop vac, dust collector, or vacuum system.
For easy storage and transport, these hoods fold flat and slide into a carrying bag. They’re spring-loaded, so they pop back up into shape when you’re ready to use them again. And no extra parts required for installation—everything you need to attach these to your workstation is included. These hoods fits miter saws up to 12" in diameter. Use them only when cutting wood. Do not use when cutting metal.
Hoods with LED light shine down from the rim to illuminate your workpiece.
Dust Hoods for Angle Grinders
Connect these dust hoods to your vacuum system to contain and remove dust and fine particles while grinding or cutting. They fit all major brands of angle grinders, including DeWalt, Milwaukee, and Makita. These dust hoods are OSHA compliant for point-of-origin dust containment. To attach these dust hoods to a standard 2" dia. vacuum hose, they either include an adapter hose or you can add a vacuum adapter (sold separately).
Nylon dust hoods contain glass filler, so they’re durable and resist abrasion. They have a sliding front edge for grinding close to a wall or an edge.
| For Vacuum Hose Dia. | Dia. | Lg. | Each | |
| 2" | 1 1/4" × 2 1/4" | 18" | 0000000 | 000000 |