Spray Pattern Spray Pattern |
---|
![]() | ![]() |
Full Cone | Hollow Cone |
Material Material |
---|
|
Spray Application Spray Application | Show |
---|
|
Spray Application Spray Application | Hide |
---|
|
System of Measurement System of Measurement |
---|
|
Connection Style Connection Style |
---|
![]() | Threaded |
For Use With For Use With |
---|
|
Flow Rate @ 40 psi Flow Rate @ 40 psi |
---|
|
Connection Type Connection Type |
---|
![]() | Pipe |
Flow Rate @ 100 psi Flow Rate @ 100 psi |
---|
|
Spray Direction Spray Direction |
---|
|
Flow Rate @ 500 psi Flow Rate @ 500 psi |
---|
|
Tip Type Tip Type |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Pipe Size and Spray Nozzles

More
Full-Cone Misting Nozzles


These nozzles provide small, atomized spray droplets for cooling, moistening, and humidifying applications. They're also a good choice for applying coatings and dust control. All are easy to clean and have a strainer.
Brass nozzles have good corrosion resistance.
416 stainless steel nozzles are stronger than brass nozzles and offer mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Flow Rate, gph | Strainer | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 40 psi | @ 100 psi | @ 500 psi | Orifice Dia. | Overall Wd. | Lg. | Max. Pressure, psi | Max. Temp., °F | Body Material | Mesh Material | Mesh Size | Spray Angle | 1-9 | 10-Up | |
Brass | ||||||||||||||
1/8 NPT Male | ||||||||||||||
0.63 | 1 | 2.24 | 0.01" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
1.26 | 2 | 4.47 | 0.01" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 0000 | 0000 |
1.9 | 3 | 6.71 | 0.02" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 0000 | 0000 |
2.53 | 4 | 8.94 | 0.02" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
3.16 | 5 | 11.18 | 0.02" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 0000 |
6.32 | 10 | 22.36 | 0.03" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
9.49 | 15 | 33.54 | 0.04" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
416 Stainless Steel | ||||||||||||||
1/8 NPT Male | ||||||||||||||
0.63 | 1 | 2.24 | 0.01" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
1.26 | 2 | 4.47 | 0.01" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
1.9 | 3 | 6.71 | 0.02" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
2.53 | 4 | 8.94 | 0.02" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
3.16 | 5 | 11.18 | 0.02" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
4.43 | 7 | 15.65 | 0.02" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
9.49 | 15 | 33.54 | 0.04" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 80° | 0000000 | 00000 | 00000 |
Hollow-Cone Misting Nozzles


Providing small, atomized spray droplets, these nozzles are recommended for cooling, moistening, and humidifying applications. They're also a good choice for applying coatings and dust control. All are easy to clean and have a strainer.
Brass nozzles have good corrosion resistance.
416 stainless steel nozzle is stronger than brass nozzles and offers mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Flow Rate, gph | Strainer | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 40 psi | @ 100 psi | @ 500 psi | Orifice Dia. | Overall Wd. | Lg. | Max. Pressure, psi | Max. Temp., °F | Body Material | Mesh Material | Mesh Size | Spray Angle | 1-9 | 10-Up | |
Brass | ||||||||||||||
1/8 NPT Male | ||||||||||||||
3.16 | 5 | 11.18 | 0.03" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 160° | 0000000 | 000000 | 000000 |
9.49 | 15 | 33.54 | 0.08" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 160° | 0000000 | 00000 | 00000 |
416 Stainless Steel | ||||||||||||||
1/8 NPT Male | ||||||||||||||
3.16 | 5 | 11.18 | 0.03" | 7/16" | 1 1/8" | 500 | 180° | Brass | Stainless Steel | 120 × 120 | 160° | 0000000 | 00000 | 00000 |
Full-Cone No-Drip Misting Nozzles




A check valve prevents the nozzle from dripping when it is turned off. All have a strainer. They provide small, atomized spray droplets for cooling, moistening, and humidifying applications. They're also a good choice for applying coatings and dust control. Made from 303 stainless steel, they're chemical, corrosion, and abrasion resistant.
For technical drawings and 3-D models, click on a part number.
Nozzles | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flow Rate, gph | Liquid Filter | Each | Replacement O-Rings | |||||||||||||
@ 100 psi | @ 500 psi | Orifice Dia. | Overall Wd. | Lg. | Max. Pressure, psi | Max. Temp., °F | Check Valve Closing Pressure, psi | Particle Size, microns | Material | Spray Angle | Includes | 1-9 | 10-Up | Each | ||
303 Stainless Steel | ||||||||||||||||
1/8 NPT Female | ||||||||||||||||
0.59 | 1.31 | 0.01" | 3/4" | 2" | 500 | 180° | 65 | 31-41 | Bronze | 70° | __ | 00000000 | 000000 | 000000 | 00000000 | 00000 |
1/8 NPT Male | ||||||||||||||||
0.59 | 1.31 | 0.01" | 3/4" | 2" | 500 | 180° | 40 | 31-41 | Bronze | 70° | Male Brass Adapter | 00000000 | 00000 | 00000 | 00000000 | 0000 |
1/4 NPT Female | ||||||||||||||||
0.59 | 1.31 | 0.01" | 3/4" | 2" | 500 | 180° | 65 | 31-41 | Bronze | 70° | __ | 00000000 | 00000 | 00000 | 00000000 | 0000 |
1/4 NPT Male | ||||||||||||||||
0.59 | 1.31 | 0.01" | 3/4" | 2 1/8" | 500 | 180° | 40 | 31-41 | Bronze | 70° | Male Brass Adapter | 00000000 | 00000 | 00000 | 00000000 | 0000 |
3/8 NPT Male | ||||||||||||||||
0.59 | 1.31 | 0.01" | 3/4" | 2" | 500 | 180° | 40 | 31-41 | Bronze | 70° | Male Brass Adapter | 00000000 | 00000 | 00000 | 00000000 | 0000 |
10-24 UNC Male | ||||||||||||||||
0.59 | 1.31 | 0.01" | __ | 1 5/16" | 500 | 180° | 40 | 31-41 | Bronze | 70° | __ | 00000000 | 00000 | 00000 | 00000000 | 0000 |
Hollow-Cone No-Drip Misting Nozzles


Create small, atomized spray droplets with these nozzles for cooling, moistening, and humidifying applications. They’re also a good choice for dust control and applying coatings. A check valve prevents these nozzles from dripping when they’re turned off. All have a strainer.
For technical drawings and 3-D models, click on a part number.
Flow Rate, gph | Liquid Filter | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 100 psi | @ 500 psi | Orifice Diameter | Overall Width | Length | Maximum Pressure, psi | Maximum Temperature, °F | Check Valve Closing Pressure, psi | Particle Size, microns | Material | Spray Angle | Each | |
Acetal Plastic | ||||||||||||
1/8 NPT Male | ||||||||||||
1 | 2.24 | 0.01" | 1/2" | 7/8" | 1,000 | 180° | 25 | 53-63 | Polyacetal Plastic | 85° | 0000000 | 00000 |
2 | 4.48 | 0.01" | 1/2" | 7/8" | 1,000 | 180° | 25 | 63-73 | Polyacetal Plastic | 85° | 0000000 | 0000 |
2.7 | 6.04 | 0.02" | 1/2" | 7/8" | 1,000 | 180° | 25 | 105-125 | Polyacetal Plastic | 100° | 0000000 | 0000 |
Hollow-Cone Ultra-Fine Air-Powered Misting and Fogging Nozzles


These nozzles create droplets less than half the size of other fogging nozzles. All mix compressed air from 70 to 100 psi and pressurized liquids up to 20 psi. Use them for mist coating, evaporative cooling, moisturizing, and spray drying. They have a knob to control the flow rate and a strainer. Made from brass, they have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Strainer | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Droplet Size, microns | Flow Rate, gph | Orifice Dia. | Overall Wd. | Lg. | Max. Pressure, psi | Air Pressure Range, psi | Max. Temp., °F | Air Filter Particle Size, microns | Material | Mesh Size | Spray Angle | Each | |
Brass | |||||||||||||
1/4 NPT Female | |||||||||||||
20-200 | 6-15 | 0.03" | 2 5/16" | 4 3/4" | 20 | 70-100 | 200° | 5 | Bronze | 40 × 40 | 103°-147° | 0000000 | 0000000 |
Full-Cone Ultra-Fine Air-Powered Misting and Fogging Nozzles


These nozzles create an ultra-fine spray with droplets less than half the size of other fogging nozzles. All mix compressed air from 70 to 100 psi and pressurized liquids up to 20 psi. They produce a uniform distribution of droplets. All have a knob to control the flow rate and a strainer. Made from brass, they have good corrosion resistance.
Nozzles with droplet sizes of 20 microns to 60 microns are good for moisturizing, coating, evaporative cooling, and dust suppression.
Nozzles with droplet sizes of 60 microns to 200 microns are good for washing and applying lubricants.
For technical drawings and 3-D models, click on a part number.
Strainer | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Droplet Size, microns | Flow Rate, gph | Orifice Dia. | Overall Wd. | Lg. | Max. Pressure, psi | Air Pressure Range, psi | Max. Temp., °F | Air Filter Particle Size, microns | Material | Mesh Size | Spray Angle | Each | |
Brass | |||||||||||||
1/4 NPT Female | |||||||||||||
20-60 | 6-30 | 0.04" | 2 5/16" | 4 3/4" | 20 | 70-100 | 200° | 5 | Bronze | 40 × 40 | 10°-21° | 0000000 | 0000000 |
60-200 | 6-30 | 0.08" | 2 5/16" | 4 3/4" | 20 | 70-100 | 200° | 5 | Bronze | 40 × 40 | 10°-21° | 0000000 | 000000 |
High-Volume Clog-Resistant Misting Nozzles


With a unique spiral tip, these nozzles produce high flow rates and are clog-resistant. They provide small, atomized spray droplets for cooling, moistening, and humidifying applications. They're also a good choice for applying coatings and dust control. Made from brass, they have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Flow Rate, gph | Each | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 10 psi | @ 40 psi | @ 100 psi | Orifice Dia. | Overall Wd. | Lg. | Max. Pressure, psi | Max. Temp., °F | Spray Pattern | Spray Angle | 1-9 | 10-Up | |
Brass | ||||||||||||
1/8 NPT Male | ||||||||||||
8.4 | 16.8 | 26.4 | 0.04" | 9/16" | 1 1/8" | 100 | 450° | Hollow Cone | 90° | 000000000 | 000000 | 000000 |
16.2 | 31.8 | 50.4 | 0.05" | 9/16" | 1 1/8" | 100 | 450° | Hollow Cone | 90° | 000000000 | 00000 | 00000 |
22.8 | 45 | 71.4 | 0.06" | 9/16" | 1 1/8" | 100 | 450° | Hollow Cone | 90° | 000000000 | 00000 | 00000 |
73.2 | 145.8 | 230.4 | 0.12" | 9/16" | 1 1/8" | 100 | 450° | Hollow Cone | 90° | 000000000 | 00000 | 00000 |
1/4 NPT Male | ||||||||||||
8.4 | 16.8 | 26.4 | 0.04" | 9/16" | 1 5/16" | 100 | 450° | Hollow Cone | 90° | 000000000 | 00000 | 00000 |
16.2 | 31.8 | 50.4 | 0.05" | 9/16" | 1 5/16" | 100 | 450° | Hollow Cone | 90° | 000000000 | 00000 | 00000 |
22.8 | 45 | 71.4 | 0.06" | 9/16" | 1 5/16" | 100 | 450° | Hollow Cone | 90° | 000000000 | 00000 | 00000 |
73.2 | 145.8 | 230.4 | 0.12" | 9/16" | 1 5/16" | 100 | 450° | Hollow Cone | 90° | 000000000 | 00000 | 00000 |