Tight-Seal Strip Brushes
Brushes have dense bristles that can dust, stop, and separate items on a conveyor as well as keep heat, sprayed liquids, and chips contained. Bristles are held in place by a binding wire. Use wire-cutting pliers to cut brushes to size. The larger the bristle diameter, the stiffer the bristles.
Nylon bristles are abrasion resistant.
Bristle | ||||||
|---|---|---|---|---|---|---|
| Overall Ht. | Dia. | Color | Max. Temp., °F | Brush Lengths, ft. | Per Ft. | |
Nylon Plastic Bristles  | ||||||
1/8" Wd. × 1/8" Ht. Galvanized Steel Backing | ||||||
| 3/4" | 0.006" | Black | 225° | 0000000 | 00000 | |
| 1" | 0.008" | Black | 225° | 0000000 | 0000 | |
| 2" | 0.010" | Black | 225° | 0000000 | 0000 | |
| 3" | 0.012" | Black | 225° | 0000000 | 0000 | |
3/16" Wd. × 7/32" Ht. Galvanized Steel Backing | ||||||
| 1" | 0.010" | Black | 225° | 0000000 | 0000 | |
| 2" | 0.010" | Black | 225° | 0000000 | 0000 | |
| 2" | 0.014" | Black | 225° | 0000000 | 0000 | |
| 3" | 0.014" | Black | 225° | 0000000 | 0000 | |
| 4" | 0.014" | Black | 225° | 0000000 | 0000 | |
| 6" | 0.014" | Black | 225° | 00000000 | 0000 | |
5/16" Wd. × 5/16" Ht. Galvanized Steel Backing | ||||||
| 1" | 0.010" | Black | 225° | 00000000 | 0000 | |
| 2" | 0.014" | Black | 225° | 00000000 | 0000 | |
| 2" | 0.020" | Black | 225° | 00000000 | 0000 | |
| 3" | 0.014" | Black | 225° | 00000000 | 0000 | |
| 3" | 0.020" | Black | 225° | 00000000 | 0000 | |
| 3" | 0.030" | Black | 225° | 00000000 | 0000 | |
| 4" | 0.020" | Black | 225° | 00000000 | 0000 | |
| 4" | 0.030" | Black | 225° | 00000000 | 0000 | |
| 6" | 0.020" | Black | 225° | 00000000 | 0000 | |
| 6" | 0.045" | Black | 225° | 00000000 | 0000 | |
| 8" | 0.045" | Black | 225° | 00000000 | 00000 | |
| 10" | 0.045" | Black | 225° | 00000000 | 00000 | |
7/16" Wd. × 7/16" Ht. Galvanized Steel Backing | ||||||
| 2" | 0.014" | Black | 225° | 00000000 | 0000 | |
| 3" | 0.020" | Black | 225° | 00000000 | 0000 | |
| 4" | 0.020" | Black | 225° | 00000000 | 0000 | |
| 6" | 0.045" | Black | 225° | 00000000 | 00000 | |
| 8" | 0.045" | Black | 225° | 00000000 | 00000 | |
| 10" | 0.045" | Black | 225° | 00000000 | 00000 | |
Corrosion-Resistant Tight-Seal Brushes
These brushes have a stainless steel backing for corrosive environments. Use them to dust, stop, and separate items on a conveyor or to keep heat, sprayed liquids, and chips contained. A binding wire holds the bristles in place. The larger the bristle diameter, the stiffer the bristles. Use wire-cutting pliers to cut brushes to size.
Bristle | ||||||
|---|---|---|---|---|---|---|
| Overall Ht. | Dia. | Color | Max. Temp., °F | Brush Lengths, ft. | Per Ft. | |
Nylon Plastic Bristles | ||||||
1/8" Wd. × 1/8" Ht. Stainless Steel Backing | ||||||
| 3/4" | 0.006" | Black | 225° | 0000000 | 00000 | |
| 1" | 0.008" | Black | 225° | 0000000 | 0000 | |
| 2" | 0.010" | Black | 225° | 0000000 | 0000 | |
| 3" | 0.012" | Black | 225° | 0000000 | 0000 | |
3/16" Wd. × 7/32" Ht. Stainless Steel Backing | ||||||
| 1" | 0.010" | Black | 225° | 0000000 | 0000 | |
| 2" | 0.014" | Black | 225° | 0000000 | 0000 | |
| 3" | 0.014" | Black | 225° | 0000000 | 0000 | |
| 4" | 0.014" | Black | 225° | 0000000 | 0000 | |
| 6" | 0.014" | Black | 225° | 0000000 | 0000 | |
5/16" Wd. × 5/16" Ht. Stainless Steel Backing | ||||||
| 1" | 0.010" | Black | 225° | 00000000 | 0000 | |
| 2" | 0.014" | Black | 225° | 00000000 | 0000 | |
| 2" | 0.020" | Black | 225° | 00000000 | 0000 | |
| 3" | 0.014" | Black | 225° | 00000000 | 00000 | |
| 3" | 0.020" | Black | 225° | 00000000 | 00000 | |
| 3" | 0.030" | Black | 225° | 00000000 | 00000 | |
| 4" | 0.020" | Black | 225° | 00000000 | 00000 | |
| 4" | 0.030" | Black | 225° | 00000000 | 00000 | |
| 6" | 0.020" | Black | 225° | 00000000 | 00000 | |
| 6" | 0.045" | Black | 225° | 00000000 | 00000 | |
| 8" | 0.045" | Black | 225° | 00000000 | 00000 | |
| 10" | 0.045" | Black | 225° | 00000000 | 00000 | |
Static-Control Tight-Seal Strip Brushes
Bristles control static buildup. Use them to dust, stop, and separate items on a conveyor or to keep heat, sprayed liquids, and chips contained. A binding wire holds the bristles in place. The larger the bristle diameter, the stiffer the bristles. Brushes can be cut to size with wire-cutting pliers.
Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Ht. | Dia. | Color | Electrical Properties | Surface Resistivity | Max. Temp., °F | Brush Lengths, ft. | Per Ft. | |
Nylon Plastic Bristles | ||||||||
3/16" Wd. × 7/32" Ht. Galvanized Steel Backing | ||||||||
| 1" | 0.008" | Black | Static Dissipative | 109 cir. mil-ohm/ft. | 200° | 00000000 | 000000 | |
| 2" | 0.012" | Black | Static Dissipative | 109 cir. mil-ohm/ft. | 200° | 00000000 | 00000 | |
| 3" | 0.020" | Black | Static Dissipative | 109 cir. mil-ohm/ft. | 200° | 00000000 | 00000 | |
5/16" Wd. × 5/16" Ht. Galvanized Steel Backing | ||||||||
| 1" | 0.008" | Black | Static Dissipative | 109 cir. mil-ohm/ft. | 200° | 00000000 | 00000 | |
| 2" | 0.012" | Black | Static Dissipative | 109 cir. mil-ohm/ft. | 200° | 00000000 | 00000 | |
| 3" | 0.020" | Black | Static Dissipative | 109 cir. mil-ohm/ft. | 200° | 00000000 | 00000 | |
Easy-Cut Strip Brushes
Use scissors to cut these flexible brushes and holders to size. Brushes have fused bristles that won't fall out when the backing is cut.
Bristle | ||||||
|---|---|---|---|---|---|---|
| Overall Ht. | Dia. | Color | Max. Temp., °F | Brush Lengths, ft. | Per Ft. | |
Nylon Plastic Bristles | ||||||
1/8" Wd. × 3/32" Ht. Nylon Plastic Backing | ||||||
| 1" | 0.008" | Black | 250° | 00000000 | 00000 | |
| 2" | 0.010" | Black | 250° | 00000000 | 0000 | |
| 3" | 0.012" | Black | 250° | 00000000 | 0000 | |
7/32" Wd. × 3/16" Ht. Nylon Plastic Backing | ||||||
| 1" | 0.010" | Black | 250° | 000000 | 0000 | |
| 2" | 0.010" | Black | 250° | 000000 | 0000 | |
| 3" | 0.012" | Black | 250° | 000000 | 0000 | |
Food Industry Easy-Cut Strip Brushes
Brushes are made of FDA listed materials so they can be used for food and beverage conveying. They have fused bristles that won't fall out when the backing is cut. Use scissors to cut them to size.
Bristle | |||||||
|---|---|---|---|---|---|---|---|
| Overall Ht. | Dia. | Color | Max. Temp., °F | Specifications Met | Brush Lengths, ft. | Per Ft. | |
Nylon Plastic Bristles | |||||||
1/8" Wd. × 3/32" Ht. Nylon Plastic Backing | |||||||
| 1" | 0.010" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 00000 | |
| 2" | 0.012" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
| 3" | 0.012" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
1/8" Wd. × 1/8" Ht. Nylon Plastic Backing | |||||||
| 1" | 0.010" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
| 2" | 0.012" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
| 3" | 0.012" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
7/32" Wd. × 3/16" Ht. Nylon Plastic Backing | |||||||
| 1" | 0.010" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
| 2" | 0.012" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
| 3" | 0.012" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
5/16" Wd. × 5/16" Ht. Nylon Plastic Backing | |||||||
| 1" | 0.010" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
| 2" | 0.012" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
| 3" | 0.012" | Black | 300° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297 | 0000000 | 0000 | |
Direct-Mount Strip Brushes
To simplify installation, bristles come stapled into a holder. Use brushes to clean conveyor belts as well as to contain dust, sprayed liquids, heat, and chips. The larger the bristle diameter, the stiffer the bristles.
Bolt-on holders can be drilled for mounting. Push-on holders have a top channel that grips the mounting surface.
Nylon bristles are abrasion resistant.Flexible holders can be cut to size with a utility knife. Rigid holders can be cut to size with a hacksaw.
Bristle | Holder | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Ht. | Dia. | Color | Wd. | Ht. | Color | For Max. Edge Thick. | Mounting Flange Wd. | Mounting Flange Ht. | Mounting Flange Thick. | Max. Temp., °F | Each | ||
3 ft. Lg. | |||||||||||||
Bolt On | |||||||||||||
Nylon Plastic Bristles with Flexible PVC Plastic Holder | |||||||||||||
| A | 2" | 0.008" | Black | 5/16" | 1" | Black | __ | __ | 5/8" | 1/16" | 150° | 000000 | 000000 |
| A | 3" | 0.012" | Black | 5/16" | 1" | Black | __ | __ | 5/8" | 1/16" | 150° | 000000 | 00000 |
| A | 4" | 0.020" | Black | 5/16" | 1" | Black | __ | __ | 5/8" | 1/16" | 150° | 000000 | 00000 |
| B | 1 7/16" | 0.008" | Black | 1" | 7/16" | Black | __ | 13/16" | __ | 1/16" | 150° | 0000000 | 00000 |
| B | 2 7/16" | 0.012" | Black | 1" | 7/16" | Black | __ | 13/16" | __ | 1/16" | 150° | 0000000 | 00000 |
| B | 3 7/16" | 0.020" | Black | 1" | 7/16" | Black | __ | 13/16" | __ | 1/16" | 150° | 0000000 | 00000 |
Nylon Plastic Bristles with Rigid PVC Plastic Holder | |||||||||||||
| A | 3" | 0.008" | Black | 9/16" | 2" | Gray | __ | __ | 1 7/16" | 1/8" | 150° | 0000000 | 00000 |
| A | 4" | 0.012" | Black | 9/16" | 2" | Gray | __ | __ | 1 7/16" | 1/8" | 150° | 0000000 | 00000 |
| A | 5" | 0.020" | Black | 9/16" | 2" | Gray | __ | __ | 1 7/16" | 1/8" | 150° | 0000000 | 00000 |
| B | 1 9/16" | 0.008" | Black | 2" | 9/16" | Gray | __ | 1 7/16" | __ | 1/8" | 150° | 0000000 | 00000 |
| B | 2 9/16" | 0.012" | Black | 2" | 9/16" | Gray | __ | 1 7/16" | __ | 1/8" | 150° | 0000000 | 00000 |
| B | 3 9/16" | 0.020" | Black | 2" | 9/16" | Gray | __ | 1 7/16" | __ | 1/8" | 150° | 0000000 | 00000 |
Push On | |||||||||||||
Nylon Plastic Bristles with Flexible PVC Plastic Holder | |||||||||||||
| C | 1 7/8" | 0.008" | Black | 3/8" | 7/8" | Black | 1/16" | __ | 1/2" | __ | 150° | 000000 | 00000 |
| C | 2 7/8" | 0.012" | Black | 3/8" | 7/8" | Black | 1/16" | __ | 1/2" | __ | 150° | 000000 | 00000 |
| C | 3 7/8" | 0.020" | Black | 3/8" | 7/8" | Black | 1/16" | __ | 1/2" | __ | 150° | 000000 | 00000 |
6 ft. Lg. | |||||||||||||
Bolt On | |||||||||||||
Nylon Plastic Bristles with Flexible PVC Plastic Holder | |||||||||||||
| A | 2" | 0.008" | Black | 5/16" | 1" | Black | __ | __ | 5/8" | 1/16" | 150° | 0000000 | 000000 |
| A | 3" | 0.012" | Black | 5/16" | 1" | Black | __ | __ | 5/8" | 1/16" | 150° | 0000000 | 000000 |
| A | 4" | 0.020" | Black | 5/16" | 1" | Black | __ | __ | 5/8" | 1/16" | 150° | 0000000 | 000000 |
| B | 1 7/16" | 0.008" | Black | 1" | 7/16" | Black | __ | 13/16" | __ | 1/16" | 150° | 0000000 | 000000 |
| B | 2 7/16" | 0.012" | Black | 1" | 7/16" | Black | __ | 13/16" | __ | 1/16" | 150° | 0000000 | 000000 |
| B | 3 7/16" | 0.020" | Black | 1" | 7/16" | Black | __ | 13/16" | __ | 1/16" | 150° | 0000000 | 000000 |
Nylon Plastic Bristles with Rigid PVC Plastic Holder | |||||||||||||
| A | 3" | 0.008" | Black | 9/16" | 2" | Gray | __ | __ | 1 7/16" | 1/8" | 150° | 0000000 | 000000 |
| A | 4" | 0.012" | Black | 9/16" | 2" | Gray | __ | __ | 1 7/16" | 1/8" | 150° | 0000000 | 000000 |
| A | 5" | 0.020" | Black | 9/16" | 2" | Gray | __ | __ | 1 7/16" | 1/8" | 150° | 0000000 | 000000 |
| B | 1 9/16" | 0.008" | Black | 2" | 9/16" | Gray | __ | 1 7/16" | __ | 1/8" | 150° | 0000000 | 000000 |
| B | 2 9/16" | 0.012" | Black | 2" | 9/16" | Gray | __ | 1 7/16" | __ | 1/8" | 150° | 0000000 | 000000 |
| B | 3 9/16" | 0.020" | Black | 2" | 9/16" | Gray | __ | 1 7/16" | __ | 1/8" | 150° | 0000000 | 000000 |
Push On | |||||||||||||
Nylon Plastic Bristles with Flexible PVC Plastic Holder | |||||||||||||
| C | 1 7/8" | 0.008" | Black | 3/8" | 7/8" | Black | 1/16" | __ | 1/2" | __ | 150° | 000000 | 000000 |
| C | 2 7/8" | 0.012" | Black | 3/8" | 7/8" | Black | 1/16" | __ | 1/2" | __ | 150° | 000000 | 000000 |
| C | 3 7/8" | 0.020" | Black | 3/8" | 7/8" | Black | 1/16" | __ | 1/2" | __ | 150° | 000000 | 000000 |
Tabletop Brushes
Use in place of ball transfers to prevent scratches when feeding and positioning flat sheets and panels. Bristles with small bristle diameters are good for sheet metal and aluminum to prevent scratching. Brush tables with larger bristle diameters can support heavier sheet stock. The larger the bristle diameter and the shorter the bristle, the stiffer the bristle.
Bristle | Overall | 3" O'all Wd. | 6" O'all Wd. | 18" O'all Wd. | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Ht. | Color | Lg. | Ht. | Each | Each | Each | |||
Nylon Plastic Bristles with Polyethylene Plastic Backing | ||||||||||
| 0.006" | 1/2" | Black | 12" | 1" | 0000000 | 000000 | 000000 | 00 | 0000000 | 0000000 |
| 0.012" | 1/2" | Black | 12" | 1" | 0000000 | 00000 | 0000000 | 0000000 | 0000000 | 000000 |
| 0.012" | 7/8" | Black | 12" | 1 3/8" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 0.012" | 1" | Black | 12" | 1 1/2" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.020" | 1" | Black | 12" | 1 1/2" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
Adjustable Cylindrical Conveyor Brushes
Position these brushes on an angle to fit 11" to 29" wide conveyors using the mounting kit (sold separately). Use them for product positioning and light cleaning. The larger the bristle diameter, the stiffer the bristles.
Bristle | 3 1/2" Brush Dia. | 4" Brush Dia. | 6" Brush Dia. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Color | Brush Lg. | For Conveyor Wd. | Max. Temp., °F | Each | Each | Each | |||
Nylon Plastic Bristles with Steel Backing | ||||||||||
| 0.012" | White | 30" | 11"-29" | 225° | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 0000000 |
| 0.018" | White | 30" | 11"-29" | 225° | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
| 0.030" | Black | 30" | 11"-29" | 225° | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
| Mounting Kit (Includes 1/2" Dia. × 36" Lg. Steel Shaft, Steel Mounting Brackets, Steel Mounting Fasteners) | 00000000 | Each | 0000000 |
Build-Your-Own Conveyor Guides
Choose the channel and wear strip or brush you need for your application. Mount the channel with a bolt and hex nut (not included), then slide the wear strip or brush into the channel.
Conveyor Guides
Conveyor guides direct and position material.
Brushes have bristles that make gentle contact with material, so they’re good for fragile items.