These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. To accommodate different latching distances, each lock comes with either three nonreversible offset cams or one straight cam and two nonreversible offset cams.

For technical drawings and 3-D models, click on a part number.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code. They’re commonly used on server cabinets, electrical panels, and other telecommunication enclosures. For easy latching and unlatching, the handle swings smoothly when raised. It lies flat when locked, so it won’t snag anything passing by. Select the turn direction when mounting the cam. Locks come with a straight cam and two nonreversible offset cams to accommodate different latching distances. When installing, program a permanent number combination of your choice. These locks also come with two keys.

For technical drawings and 3-D models, click on a part number.

A red indicator on the side of these locks is visible when they are open and hidden when they are locked. The lock is reversible for right- and left-hand mounting.

Replacement keys are sold separately.

For technical drawings and 3-D models, click on a part number.

Made of plastic, these couplings are lighter in weight than metal cam-and-groove hose couplings, yet have the chemical resistance to withstand gasoline and other harsh substances. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.

Plugs with male threaded end are also known as F adapters.

Plugs with female threaded end are also known as A adapters.

Plugs with barbed end are also known as E adapters. Insert the barbed end into rubber hose and secure with a clamp.

Sockets with locking levers prevent accidental disconnection. The locking pins engage automatically when the coupling is connected. Press the locking pins simultaneously to disengage.

Sockets with male threaded end are also known as B couplers.

Sockets with female threaded end are also known as D couplers.

Sockets with barbed end are also known as C couplers. Insert the barbed end into rubber hose and secure with a clamp.

Nylon plugs and sockets have better strength than PVDF plugs and sockets. They have good corrosion and chemical resistance to handle gasoline and fuel applications.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

For technical drawings and 3-D models, click on a part number.