About Pulleys
More
Pulleys for Wire Rope—For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing. Ball bearings and needle-roller bearings allow for easier turns than sleeve bearings.
Acetal and nylon are lightweight and corrosion resistant.
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | 1-24 | 25-99 | 100-Up | ||
With Ball Bearing  | |||||||||||
| A | 1/16" | 90 | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 000000 | 000000 | 00000 |
| A | 1/8" | 90 | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 | 00000 | 0000 |
| D | 1/32" | 10 | 5/8" | 1/2" | 1/8" | 1/8" | Nylon Plastic | 0000000 | 00000 | 00000 | 0000 |
| D | 3/64" | 10 | 3/4" | 5/8" | 1/8" | 3/16" | Nylon Plastic | 0000000 | 00000 | 00000 | 0000 |
| D | 3/64" | 90 | 1 1/16" | 7/8" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 | 00000 | 0000 |
| D | 3/32" | 90 | 1 1/2" | 1 1/4" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 | 00000 | 0000 |
With Needle-Roller Bearing | |||||||||||
| A | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| A | 3/16" | 800 | 2 1/2" | 2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| A | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| A | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| A | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| A | 3/8" | 1,600 | 3" | 2 9/16" | 1/2" | 5/8" | Nylon Plastic | 00000000 | 00000 | 00000 | 00000 |
| G | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
Without Bearing | |||||||||||
| D | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 0000 | 0000 | 0000 |
| D | 3/16" | 800 | 3" | 2 1/2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 | 0000 | 0000 |
| D | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 | 0000 | 0000 |
| D | 1/4" | Not Rated | 1 3/4" | 1 3/16" | 1/4" | 7/16" | Nylon Plastic | 00000000 | 0000 | 0000 | 0000 |
| D | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| D | 1/4" | 1,400 | 4 1/2" | 3 7/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| D | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| H | 5/16" | 1,600 | 5 1/2" | 4 5/8" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
| H | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 | 00000 | 00000 |
Easy-Open Hanging Pulleys for Wire Rope—For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing—a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Hanging Pulleys for Wire Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Single-Groove Without Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||
| A | 1/4" | 150 | 1 3/8" | 9/16" | 1 3/8" | 2 13/16" | 3/8" | 3/16" | Nylon Plastic | Stainless Steel | 0000000 | 000000 |
Single-Groove With Bearing | ||||||||||||
Rigid Carabiner | ||||||||||||
| C | 3/16" | 900 | 3 3/8" | 1 3/16" | 4" | 7 3/8" | 3/4" | 5/16" | Nylon Plastic | Aluminum | 0000000 | 000000 |
Hanging Pulleys for Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Style J reduce the force needed to hold your load in place. Unlike standard pulleys, these have a V-groove for more grip on your rope, and they ratchet when under load so they won't slip in the other direction. Pulley for 3/8" dia. rope can be set to ratchet even when not under load.
Mounted Pulleys for Rope—For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless steel has the most corrosion resistance.
Mounting Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Each | ||
With Ball Bearing | |||||||||||||
| 7 | 3/8" | 1,100 | 2 3/16" | 15/16" | 3 1/8" | 2 13/16" | Nylon Plastic | Nylon Plastic | 2 | 1/4" | 2 3/16" | 0000000 | 000000 |
Without Bearing | |||||||||||||
| 8 | 1/2" | 1,750 | 2" | 7/8" | 2 3/4" | 2 1/2" | Nylon Plastic | Stainless Steel | 2 | 1/4" | 2 3/16" | 0000000 | 00000 |
Pulleys for Wire Rope—For Lifting
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with ball bearings and needle-roller bearings allow for easier turns than pulleys with sleeve bearings. Pulleys with open bearings dissipate heat more efficiently than those with sealed bearings.
Nylon pulleys are lighter in weight than metal ones.
Warning: Never use to lift people or items over people.
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | ||
| A | 1/4" | 250 | 1 1/2" | 1 1/16" | 1/4" | 9/16" | Nylon Plastic | 0000000 | 00000 |
| A | 1/4" | 750 | 2 3/4" | 2 1/4" | 5/16" | 9/16" | Nylon Plastic | 0000000 | 0000 |
| A | 1/4" | 1,200 | 3" | 2 3/8" | 5/16" | 5/8" | Nylon Plastic | 0000000 | 00000 |
| B | 3/64" | 20 | 3/4" | 5/8" | 1/8" | 3/16" | Nylon Plastic | 0000000 | 0000 |
| B | 3/64" | 70 | 1 1/16" | 7/8" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 0000 |
| B | 3/64" | 70 | 1 1/16" | 7/8" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 0000 |
| B | 1/16" | 90 | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 0000 |
| B | 3/32" | 150 | 1 1/2" | 1 1/4" | 3/8" | 5/16" | Nylon Plastic | 0000000 | 0000 |
| J | 1/16" | 90 | 1 1/4" | 1 1/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 0000 |
| J | 3/32" | 150 | 1 1/2" | 1 1/4" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 0000 |
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Bearing Seal Type | Each | ||
| E | 1/32" | 10 | 5/8" | 1/2" | 1/8" | 5/32" | Nylon Plastic | Open | 0000000 | 00000 |
| E | 3/64" | 10 | 1/2" | 7/16" | 1/8" | 5/32" | Nylon Plastic | Open | 0000000 | 0000 |
| E | 3/64" | 10 | 3/4" | 5/8" | 1/8" | 5/32" | Nylon Plastic | Open | 0000000 | 0000 |
| E | 3/64" | 35 | 1" | 13/16" | 1/8" | 1 3/16" | Nylon Plastic | Shielded | 0000000 | 00000 |
| E | 3/64" | 35 | 1 1/16" | 7/8" | 3/16" | 1/4" | Nylon Plastic | Open | 0000000 | 0000 |
| E | 3/64" | 35 | 1 1/16" | 7/8" | 1/4" | 1/4" | Nylon Plastic | Open | 0000000 | 0000 |
| E | 1/16" | 45 | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Nylon Plastic | Open | 0000000 | 0000 |
| E | 1/16" | 45 | 1 1/4" | 1 1/16" | 1/4" | 1/4" | Nylon Plastic | Open | 0000000 | 0000 |
| E | 3/32" | 70 | 1 1/2" | 1 1/4" | 3/8" | 5/16" | Nylon Plastic | Open | 0000000 | 00000 |
| E | 3/32" | 80 | 1 1/2" | 1 1/4" | 1/4" | 5/16" | Nylon Plastic | Open | 0000000 | 0000 |
| E | 1/8" | 70 | 1 3/4" | 1 3/8" | 3/8" | 5/16" | Nylon Plastic | Open | 0000000 | 00000 |
| E | 1/8" | 80 | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Nylon Plastic | Open | 0000000 | 0000 |
Machinable Pulleys
Customize the groove and bore to fit your application. The center of the pulley has a pilot hole so you can drill a bore to match a specific shaft size. Nylon is easy to machine yet resists impact and corrosion.
Pulley Diameter Checkers
Also known as groove gauges, these measure the groove of your pulley to check for wear as well as determine the correct wire rope size.
| Includes | Each | |
| 14 Gauges in 1/4" to 1 1/2" Wire Rope Diameters | 0000000 | 000000 |