Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

Because this 6/12 material absorbs less water than standard nylon 6/6, it holds its shape better. It’s often machined into hose fittings and valve components.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

To maintain their size and shape under heavy compression, these sheets have one layer of nylon fabric for every 1/16” of thickness. Use them as flange gaskets and diaphragm packing.

These neoprene gasket sheets are reinforced with a nylon insert to prevent them from losing shape while under pressure up to 1,000 psi.

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.

This wear-resistant nylon mesh has openings that meet an exact size tolerance, providing accurate, consistent results in filtering and sifting applications.

The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

For a consistent finish, these pads are made with nylon mesh that flexes to compensate for uneven pressure as you sand. The hook and loop backing lets you attach, remove, and reuse these pads until they’re used up.