For Use With For Use With |
|---|
|
Maximum Flow Rate Maximum Flow Rate |
|---|
|
End Type End Type |
|---|
|
Connection Style Connection Style |
|---|
 |
| Threaded |
 |
| Push to Connect |
 |
| Compression |
Housing Material Housing Material |
|---|
|
Overall Diameter Overall Diameter |
|---|
|
|
|
Removes Particle Size Down To Removes ParticleSize Down To |
|---|
|
|
Cartridge Stage Cartridge Stage |
|---|
|
Specifications Met Specifications Met |
|---|
|
Filter Capacity Filter Capacity |
|---|
|
About Filters and Particle Sizes
More
Filter Cartridges for Reducing Odor and Chlorine in Water
Use these cartridges in a filter housing to treat water quality and reduce odor and chlorine in your line.
Pleated cartridges provide a large surface area for high particle retention.
Solid cartridges are made of one piece of material for high strength and durability.
| Ht. | OD | ID | Removes Particle Size Down To, microns | Max. Flow Rate, gpm | Max. Temp., °F | End Type | Each | ||
Carbon—Pleated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | 3 3/4" | 2 5/8" | 1" | 5 | 2 | 140° | Open on Both Ends | 0000000 | 000000 |
Carbon—Solid | |||||||||
| C | 9 3/4" | 2 3/4" | 1" | 5 | 3 | 125° | Open on Both Ends | 0000000 | 0000 |
| D | 9 3/4" | 2 7/8" | 1" | 20 | 1 | 125° | One Open and One Closed | 00000000 | 00000 |
| E | 4 7/8" | 2 1/2" | 1" | 5 | 0.5 | 125° | Open on Both Ends | 00000000 | 0000 |
| E | 9 3/4" | 2 1/2" | 1" | 5 | 1 | 125° | Open on Both Ends | 0000000 | 0000 |
| F | 9 3/4" | 2 5/8" | 1" | 1 | 1 | 145° | Open on Both Ends | 0000000 | 00000 |
| F | 9 3/4" | 2 7/8" | 1" | 0.5 | 0.6 | 180° | One Open and One Closed | 00000000 | 00000 |
| F | 9 3/4" | 2 7/8" | 1" | 0.5 | 1 | 125° | Open on Both Ends | 0000000 | 00000 |
| F | 9 3/4" | 2 7/8" | 1" | 5 | 1 | 125° | Open on Both Ends | 0000000 | 00000 |
| F | 9 3/4" | 2 7/8" | 1" | 5 | 1 | 180° | Open on Both Ends | 0000000 | 00000 |
| F | 9 3/4" | 4 5/8" | 1" | 5 | 2 | 180° | Open on Both Ends | 0000000 | 00000 |
| F | 9 3/4" | 4 3/4" | 1" | 25 | 10 | 100° | Open on Both Ends | 0000000 | 00000 |
| F | 20" | 2 7/8" | 1" | 0.5 | 2 | 180° | Open on Both Ends | 0000000 | 00000 |
| F | 20" | 2 7/8" | 1" | 5 | 2 | 180° | Open on Both Ends | 0000000 | 00000 |
| F | 20" | 4 3/4" | 1" | 25 | 20 | 100° | Open on Both Ends | 0000000 | 000000 |
Paper—Pleated | |||||||||
| B | 10" | 2 1/2" | 1" | 10 | 3 | 125° | Open on Both Ends | 0000000 | 00000 |
| B | 10" | 4 1/2" | 1" | 10 | 8 | 125° | Open on Both Ends | 0000000 | 00000 |
| B | 20" | 2 1/2" | 1" | 10 | 6 | 125° | Open on Both Ends | 0000000 | 00000 |
| B | 20" | 4 1/2" | 1" | 10 | 16 | 125° | Open on Both Ends | 0000000 | 00000 |
Plastic Filter Housings with Cartridge for
Reducing Odor and Chlorine in Water
These filter housings come with a cartridge that filters odor and chlorine from your water line. They have a pressure-relief valve that allows you to release pressure prior to replacing the cartridge.
Opaque filter housings are light-blocking to minimize algae growth.
Clear filter housings let you monitor debris collecting in the cartridge without stopping flow.
Filter housings with flow-control valve allow you to stop the flow to replace the cartridge.
Filter housings with compression tube fitting adapters let you connect to tubing (sold separately) so you can route flow around a clogged cartridge.
Filter housings with differential pressure gauge show you when it's time to replace a clogged cartridge.
Filter Housings with Cartridge | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cartridge | Replacement Cartridges | Replacement O-Rings | Mounting Brackets | ||||||||||||
| Pipe Size | Thread Type | OD | Ht. | Max. Flow Rate, gpm | Max. Pressure, psi | Removes Particle Size Down To, microns | Features | Each | Each | Each | Each | ||||
Filter Housings with Cartridge | |||||||||||||||
Opaque Blue Polypropylene Plastic Housing | |||||||||||||||
| 1/4 | NPT | 2 7/8" | 9 3/4" | 4 | 125 | 5 | Pressure-Relief Valve | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 3/8 | NPT | 2 1/2" | 4 7/8" | 2 | 125 | 5 | Pressure-Relief Valve | 000000 | 00000 | 00000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 1/2 | NPT | 2 7/8" | 9 3/4" | 4 | 125 | 5 | Pressure-Relief Valve | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 1/2 | NPT | 2 7/8" | 10 1/4" | 1 | 125 | 0.15 | Clog Indicator with Differential Pressure Gauge Pressure-Relief Valve | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/4 | NPT | 2 1/2" | 20" | 5 | 125 | 5 | Pressure-Relief Valve | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 3/4 | NPT | 2 7/8" | 10 1/4" | 1 | 125 | 0.15 | Clog Indicator with Differential Pressure Gauge Pressure-Relief Valve | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/4 | NPT | 4 5/8" | 20" | 8 | 90 | 5 | Pressure-Relief Valve | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 1 | NPT | 4 1/2" | 9 3/4" | 2 | 100 | 25 | Pressure-Relief Valve | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 0000 | 00000000 | 00000 |
| 1 | NPT | 4 5/8" | 20" | 8 | 90 | 5 | Pressure-Relief Valve | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 1 1/2 | NPT | 4 5/8" | 20" | 8 | 90 | 5 | Pressure-Relief Valve | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
Clear Polystyrene Plastic Housing | |||||||||||||||
| 1/4 | NPT | 2 7/8" | 9 3/4" | 4 | 125 | 5 | Pressure-Relief Valve | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8 | NPT | 2 1/2" | 4 7/8" | 2 | 125 | 5 | Pressure-Relief Valve | 0000000 | 00000 | 00000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 1/2 | NPT | 2 7/8" | 9 3/4" | 4 | 125 | 5 | Pressure-Relief Valve | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/4 | NPT | 2 1/2" | 9 3/4" | 5 | 125 | 5 | Pressure-Relief Valve | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 |
| 3/4 | NPT | 2 5/8" | 20" | 8 | 150 | 3 | Pressure-Relief Valve | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
Filter Housings with Cartridge and Two 3/4" Compression Tube Fitting Adapters | |||||||||||||||
Clear Polystyrene Plastic Housing | |||||||||||||||
| 3/4 | NPT | 2 1/2" | 9 3/4" | 5 | 125 | 5 | Flow-Control Valve Pressure-Relief Valve | 0000000 | 000000 | 0000000 | 0000 | 000000 | 00 | 000000 | 00 |
Disposable Plastic Filter Housings with Cartridge
for Reducing Odor and Chlorine in Water
The filter housing and cartridge are combined in one disposable unit. Use them to filter odor and chlorine from your water line without the cost of a separate filter housing. They are opaque white so they block light to minimize algae growth. They are designed for low-flow applications.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Dia. | Lg. | Each | |
Opaque White Polypropylene Plastic Housing | |||||||||
| 1/4 | NPT | Not Rated | 125 | 100° | Not Rated | 2 1/2" | 10 1/2" | 00000000 | 000000 |
| 1/4 | NPT | 0.5 | 125 | 100° | 5 | 2" | 10" | 00000000 | 00000 |
| 3/8 | NPT | 0.5 | 125 | 100° | 5 | 2" | 10" | 00000000 | 00000 |
| 3/8 | NPT | 1 | 125 | 100° | 5 | 2 1/2" | 14" | 00000000 | 00000 |
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Tube Connection Type | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Dia. | Lg. | Each | |
Opaque White Polypropylene Plastic Housing | |||||||||
| 1/4" | Compression | 0.75 | 125 | 100° | Not Rated | 2" | 10" | 00000000 | 000000 |
| 1/4" | Push-to-Connect | 0.5 | 125 | 100° | 5 | 2" | 10" | 00000000 | 00000 |
| 3/8" | Push-to-Connect | 0.5 | 125 | 100° | 5 | 2" | 10" | 00000000 | 00000 |
Quick-Change Plastic Filter
Housings with Cartridge for Water
Swap cartridges with a turn of your wrist—these filter housings come with a cartridge that connects directly to the filter housing cover. Water flow stops automatically when the cartridge is disconnected. Filter housings are opaque white so they block light to minimize algae growth.
Filter Housings with Cartridge | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Cartridge | Replacement Cartridges | |||||||||
| For Tube OD | OD | Ht. | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Each | Each | ||
Opaque White Polypropylene Plastic Housing | ||||||||||
For Reducing Chlorine and Odor | ||||||||||
| 3/8" | 3" | 10 5/8" | 2 | 125 | 100° | Not Rated | 0000000 | 000000 | 0000000 | 000000 |
For Reducing Chlorine, Lead, and Odor | ||||||||||
| 3/8" | 3" | 10 5/8" | 1.5 | 125 | 100° | 0.5 | 0000000 | 000000 | 0000000 | 00000 |
High-Capacity Plastic Filter Housings
with Cartridge for Drinking Water
Also known as reverse osmosis water filters, these have several cartridges that reduce odor, rust, sediment, and lead from drinking water, as well as a tank to store filtered water. Filter housings have an additional prefilter to protect the reverse osmosis cartridge from damage caused by particles and chlorine. They are opaque white so they block light to minimize algae growth.
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Removes Particle Size Down To, microns | Pressure Range, psi | Max. Temp., °F | Cartridge Stage (OD × Ht.) | Ht. | Wd. | Dp. | Specifications Met | Each | |
9.5 gal./day Filter Capacity | ||||||||||
Opaque White Polypropylene Plastic Housing | ||||||||||
| 0.007 | 0.5 | 40–90 | 100° | First Stage (2 1/2" × 9 3/4") Second Stage (2 1/2" × 9 3/4") Reverse Osmosis (2 1/4" × 9 3/4") Fourth Stage (2 1/2" × 9 3/4") | 17 1/4" | 13 1/2" | 5 1/2" | NSF/ANSI Standard 58 for Drinking Water Treatment | 0000000 | 0000000 |
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Removes Particle Size Down To, microns | Pressure Range, psi | Max. Temp., °F | Cartridge Stage (OD × Ht.) | Ht. | Wd. | Dp. | Specifications Met | Each | |
50 gal./day Filter Capacity | ||||||||||
Opaque White Polypropylene Plastic Housing | ||||||||||
| 0.03 | 10 | 40–100 | 100° | First Stage (2 3/8" × 9 3/4") Second Stage (2 7/8" × 9 3/4") Reverse Osmosis (2" × 11 3/4") Fourth Stage (2" × 10") | 16" | 12" | 6" | NSF/ANSI Standard 58 for Drinking Water Treatment | 0000000 | 0000000 |
Plastic Filter Housings with Cartridge for Drinking Water
Prepare water for use in beverages, food preparation, and ice production. This filter housing comes with a cartridge that prevents scale formation, which can damage equipment. Filter housing is opaque blue so it blocks light to minimize algae growth. It has a flow-control valve that allows you to stop the flow to replace the cartridge. It comes with adapters and a length of tubing for under-sink installation between a water line and faucet. Filter and cartridge meet NSF/ANSI Standards 42 and 53 for use with drinking (potable) water.
Filter Housings with Cartridge | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cartridge | Replacement Cartridges | |||||||||||
| Pipe Size | Thread Type | OD | Ht. | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temperature, °F | Removes Particle Size Down To, microns | Mounting Fasteners Included | Each | Each | ||
Opaque Blue Polypropylene Plastic Housing | ||||||||||||
| 3/8 | NPT | 4" | 10 1/4" | 0.75 | 125 | 100° | 0.5 | Yes | 0000000 | 0000000 | 0000000 | 0000000 |