Filler Material Filler Material | Show |
|---|
|
Filler Material Filler Material | Hide |
|---|
|
|
Color Color |
|---|
 | Green |
Shape Shape |
|---|
 |  |
| Sheet and Bar | Rod and Disc |
 | |
| Round Tube |
Performance Properties Performance Properties |
|---|
|
System of Measurement System of Measurement |
|---|
|
Material Material |
|---|
|
For Use Outdoors For Use Outdoors |
|---|
|
Flexibility Flexibility |
|---|
 | Semi-Rigid |
Friction Rating Friction Rating |
|---|
|
Grade Grade |
|---|
|
Fabrication Fabrication |
|---|
|
Hardness Hardness |
|---|
|
Thermal Stability Thermal Stability |
|---|
|
For Use With For Use With |
|---|
Clarity Clarity |
|---|
 |
| Opaque |
Texture Texture |
|---|
 | Smooth |
Electrical Insulation Rating Electrical Insulation Rating |
|---|
|
About Plastic
More
Oil-Filled Easy-to-Machine Wear-Resistant
Cast Nylon Sheets and Bars
- Color: Green
- Temperature Range: 32° to 230° F
- Tensile Strength: 9,500-10,000 psi (Good)
- Impact Strength: 1.2-1.4 ft-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM D5989
Fabricate gears, sprockets, and wear strips for use in hard-to-reach areas where adding lubricants would be difficult. These sheets and bars are impregnated with an oil lubricant, so they stay slippery over time. Because they are made of cast nylon 6, they are easier to machine than standard nylon sheets, plus they’re better electrical insulators. This material is comparable to Nycast and Nyloil.
| Thick. | Thick. Tolerance | Each | |
6" × 6" | |||
|---|---|---|---|
| 1/4" | 0" to 0.025" | 000000000 | 000000 |
| 3/8" | 0" to 0.025" | 000000000 | 00000 |
| 1/2" | 0" to 0.025" | 000000000 | 00000 |
| 3/4" | 0" to 0.025" | 000000000 | 00000 |
| 1" | 0" to 0.025" | 000000000 | 00000 |
| 1 1/2" | 0" to 0.025" | 000000000 | 00000 |
| 2" | 0" to 0.025" | 000000000 | 00000 |
| 3" | 0" to 0.025" | 000000000 | 00000 |
12" × 12" | |||
| 1/4" | 0" to 0.025" | 00000000 | 00000 |
| 3/8" | 0" to 0.025" | 00000000 | 00000 |
| 1/2" | 0" to 0.025" | 00000000 | 00000 |
| 3/4" | 0" to 0.025" | 00000000 | 00000 |
| 1" | 0" to 0.025" | 00000000 | 000000 |
| 1 1/2" | 0" to 0.025" | 00000000 | 000000 |
| 2" | 0" to 0.025" | 00000000 | 000000 |
| 3" | 0" to 0.025" | 00000000 | 000000 |
12" × 24" | |||
| 1/4" | 0" to 0.025" | 00000000 | 00000 |
| 3/8" | 0" to 0.025" | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 00000000 | 000000 |
| 3/4" | 0" to 0.025" | 00000000 | 000000 |
| 1" | 0" to 0.025" | 00000000 | 000000 |
| 1 1/2" | 0" to 0.025" | 00000000 | 000000 |
| 2" | 0" to 0.025" | 00000000 | 000000 |
| 3" | 0" to 0.025" | 00000000 | 000000 |
| Wd. | Lengths, ft. | Per Ft. | |
1/4" Thick. (0" to 0.025") | |||
|---|---|---|---|
| 1" | 0000000 | 00000 | |
| 1 1/2" | 0000000 | 0000 | |
| 2" | 0000000 | 00000 | |
1/2" Thick. (0" to 0.025") | |||
| 1" | 0000000 | 0000 | |
| 1 1/2" | 0000000 | 00000 | |
| 2" | 0000000 | 00000 | |
3/4" Thick. (0" to 0.025") | |||
| 1" | 0000000 | 00000 | |
| 1 1/2" | 0000000 | 00000 | |
| 2" | 0000000 | 00000 | |
1" Thick. (0" to 0.025") | |||
| 1" | 0000000 | 00000 | |
| 1 1/2" | 0000000 | 00000 | |
| 2" | 0000000 | 00000 | |
Oil-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Rods
- Color: Green
- Temperature Range: 32° to 230° F
- Tensile Strength: 9,500-10,000 psi (Good)
- Impact Strength: 1.2-1.4 ft-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM D5989
These rods remain slippery over time because they’re impregnated with an oil lubricant. Use them to fabricate pulleys, screws, bushings, and bearings for use in hard-to-reach places where adding a lubricant would be difficult. Because they are made of cast nylon 6, they are easier to machine than standard nylon rods, plus they’re better electrical insulators. This material is comparable to Nycast and Nyloil.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | 2 ft. Lg. | ||||
|---|---|---|---|---|---|
| Dia. | Tolerance Rating | Each | Each | ||
| 1" | Oversized | 0000000 | 000000 | 0000000 | 000000 |
| 1 1/4" | Oversized | 0000000 | 00000 | 0000000 | 00000 |
| 1 1/2" | Oversized | 0000000 | 00000 | 0000000 | 00000 |
| 1 3/4" | Oversized | 0000000 | 00000 | 0000000 | 00000 |
| 2" | Oversized | 0000000 | 00000 | 0000000 | 00000 |
| 3" | Oversized | 0000000 | 00000 | 0000000 | 000000 |
| 4" | Oversized | 0000000 | 000000 | 0000000 | 000000 |
| 5" | Oversized | 0000000 | 000000 | 0000000 | 000000 |
| 6" | Oversized | 0000000 | 000000 | 0000000 | 000000 |
| 8" | Oversized | 0000000 | 000000 | 0000000 | 000000 |
Oil-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Tubes
- Color: Green
- Temperature Range: 32° to 230° F
- Tensile Strength: 9,500-10,000 psi (Good)
- Impact Strength: 1.2-1.4 ft-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM D5989
Impregnated with oil, these tubes remain slippery over time. Use them to fabricate pulleys, bushings, and bearings for use in hard-to-reach areas where adding a lubricant would be difficult. Because they are made of cast nylon 6, they are easier to machine than standard nylon rods, plus they’re better electrical insulators. The OD is oversized and the ID is undersized for finishing to the sizes listed. This material is comparable to Nycast and Nyloil.
For technical drawings and 3-D models, click on a part number.
| OD | ID | Lengths, ft. | Per Ft. | |
1/4" Wall Thick. | ||||
|---|---|---|---|---|
| 2" | 1 1/2" | 000000000 | 000000 | |
1/2" Wall Thick. | ||||
| 2" | 1" | 000000000 | 00000 | |
| 2 1/4" | 1 1/4" | 000000000 | 00000 | |
| 2 1/2" | 1 1/2" | 000000000 | 00000 | |
| 2 3/4" | 1 3/4" | 000000000 | 00000 | |
| 3" | 2" | 000000000 | 00000 | |
| 3 1/4" | 2 1/4" | 000000000 | 00000 | |
| 3 1/2" | 2 1/2" | 000000000 | 00000 | |
| 4" | 3" | 000000000 | 00000 | |
| 4 1/2" | 3 1/2" | 000000000 | 00000 | |
| 5" | 4" | 000000000 | 00000 | |
| 5 1/2" | 4 1/2" | 000000000 | 00000 | |
5/8" Wall Thick. | ||||
| 2 1/4" | 1" | 000000000 | 00000 | |
| 2 3/4" | 1 1/2" | 000000000 | 00000 | |
| 3 1/4" | 2" | 000000000 | 00000 | |
3/4" Wall Thick. | ||||
| 2 1/2" | 1" | 000000000 | 00000 | |
| 3" | 1 1/2" | 000000000 | 00000 | |
| 3 1/2" | 2" | 000000000 | 00000 | |
| 4 1/2" | 3" | 000000000 | 00000 | |
| 5" | 3 1/2" | 000000000 | 00000 | |
| 5 1/2" | 4" | 000000000 | 00000 | |
1" Wall Thick. | ||||
| 3" | 1" | 000000000 | 00000 | |
| 3 1/4" | 1 1/4" | 000000000 | 00000 | |
| 3 1/2" | 1 1/2" | 000000000 | 00000 | |
| 4" | 2" | 000000000 | 00000 | |
| 4 1/2" | 2 1/2" | 000000000 | 00000 | |
| 5" | 3" | 000000000 | 00000 | |
| 5 1/2" | 3 1/2" | 000000000 | 00000 | |
| 6" | 4" | 000000000 | 00000 | |
1 1/2" Wall Thick. | ||||
| 6" | 3" | 000000000 | 000000 | |