About Oil Fittings and Oil Cups
More
Oil Fittings for Unthreaded Holes
Drive these fittings into unthreaded holes.
Zinc and zinc-plated steel fittings have mild corrosion resistance.
Fittings with a check valve prevent oil from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants. Fittings with a self-closing hinged cover block contaminants from entering equipment.
Note: Fittings do not hold oil; any oil dispensed into the fittings passes into the part to be lubricated.
For technical drawings and 3-D models, click on a part number.
Each | |||||||
|---|---|---|---|---|---|---|---|
| For Hole Dia. | Material | Shank Lg. | Overall Ht. | Installation Clearance | 1-9 | 10-Up | |
| 3/16" | Zinc-Plated Steel | 1/4" | 9/32" | 7/32" | 000000 | 00000 | 00000 |
| 1/4" | Zinc-Plated Steel | 9/32" | 5/16" | 9/32" | 000000 | 0000 | 0000 |
| 5/16" | Zinc-Plated Steel | 5/16" | 3/8" | 11/32" | 000000 | 0000 | 0000 |
| 3/8" | Zinc-Plated Steel | 3/8" | 15/32" | 13/32" | 000000 | 00000 | 00000 |
| 7/16" | Zinc-Plated Steel | 15/32" | 17/32" | 15/32" | 000000 | 00000 | 00000 |
Each | |||||||
|---|---|---|---|---|---|---|---|
| For Hole Dia. | Material | Shank Lg. | Overall Ht. | Installation Clearance | 1-9 | 10-Up | |
| 3/16" | Zinc-Plated Steel | 7/32" | 15/32" | 3/4" | 0000000 | 00000 | 00000 |
| 1/4" | Zinc-Plated Steel | 5/32" | 13/32" | 11/16" | 000000 | 00000 | 00000 |
| 1/4" | Zinc-Plated Steel | 1/4" | 7/16" | 3/4" | 0000000 | 00000 | 0000 |
| 5/16" | Zinc-Plated Steel | 7/32" | 1/2" | 3/4" | 000000 | 00000 | 00000 |
| 3/8" | Zinc-Plated Steel | 7/32" | 17/32" | 25/32" | 000000 | 00000 | 00000 |
| 7/16" | Zinc-Plated Steel | 5/16" | 11/16" | 29/32" | 000000 | 00000 | 00000 |
| 1/2" | Zinc-Plated Steel | 3/8" | 13/16" | 1 7/32" | 0000000 | 00000 | 00000 |
| 3/4" | Zinc-Plated Steel | 9/16" | 1 3/16" | 1 13/16" | 0000000 | 00000 | 00000 |
| 7/8" | Zinc-Plated Steel | 1/2" | 1 1/16" | 1 13/16" | 0000000 | 00000 | 00000 |
| 1" | Zinc-Plated Steel | 19/32" | 1 5/16" | 2 3/32" | 0000000 | 00000 | 00000 |
| 1 1/4" | Zinc-Plated Steel | 13/16" | 1 11/16" | 2 7/16" | 0000000 | 00000 | 00000 |
Oil Fittings
Zinc and zinc-plated steel fittings have mild corrosion resistance. Zinc-plated brass fittings have good corrosion resistance. Nickel-plated brass fittings are more corrosion resistant than zinc-plated brass fittings.
Fitting with a check valve prevents oil from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants. Fittings with a self-closing hinged cover block contaminants from entering equipment.
UNF and UNEF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.
Note: Fittings do not hold oil; any oil dispensed into the fittings passes into the part to be lubricated.
Each | |||||||
|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
1/4"-32 Male UNEF Threads | |||||||
| Zinc-Plated Brass | 7/16" | 7/32" | 7/32" | 3/8" | 000000 | 000000 | 000000 |
Each | |||||||
|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
1/8 Male NPT Threads | |||||||
| Zinc-Plated Steel | 13/16" | 1/4" | 1/4" | 13/16" | 0000000 | 000000 | 000000 |
| Zinc-Plated Steel | 7/8" | 9/32" | 9/32" | 29/32" | 0000000 | 00000 | 00000 |
| Zinc-Plated Steel | 1 5/32" | 13/32" | 13/32" | 1 7/32" | 0000000 | 00000 | 00000 |
1/4 Male NPT Threads | |||||||
| Zinc-Plated Steel | 1 5/32" | 13/32" | 13/32" | 1 7/32" | 0000000 | 00000 | 00000 |
3/8 Male NPT Threads | |||||||
| Zinc-Plated Steel | 1 9/32" | 3/8" | 3/8" | 1 7/32" | 0000000 | 00000 | 00000 |
1/2 Male NPT Threads | |||||||
| Zinc-Plated Steel | 1 7/16" | 9/16" | 9/16" | 1 7/16" | 0000000 | 00000 | 00000 |
10-32 Male UNF Threads | |||||||
| Zinc-Plated Steel | 9/16" | 3/16" | 3/16" | 3/4" | 0000000 | 00000 | 00000 |
1/4"-32 Male UNEF Threads | |||||||
| Zinc-Plated Steel | 9/16" | 5/32" | 5/32" | 11/16" | 0000000 | 00000 | 00000 |
| Zinc-Plated Steel | 9/16" | 3/16" | 3/16" | 3/4" | 0000000 | 00000 | 00000 |
| Zinc-Plated Steel | 3/4" | 1/4" | 1/4" | 3/4" | 0000000 | 00000 | 00000 |
5/16"-32 Male UNEF Threads | |||||||
| Zinc-Plated Steel | 27/32" | 1/4" | 1/4" | 13/16" | 0000000 | 00000 | 00000 |
1 Female NPT Threads | |||||||
| Zinc-Plated Steel | 1 9/16" | 3/4" | 3/4" | 2 9/32" | 0000000 | 000000 | 00000 |
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Overall Wd. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
1/8 Male NPT Threads | ||||||||
| Zinc | 25/32" | 1 3/32" | 1/4" | 1/4" | 1 5/16" | 0000000 | 000000 | 000000 |
10-32 Male UNF Threads | ||||||||
| Zinc | 19/32" | 3/4" | 5/32" | 5/32" | 1 1/16" | 0000000 | 00000 | 00000 |
1/4"-32 Male UNEF Threads | ||||||||
| Zinc | 19/32" | 3/4" | 3/16" | 3/16" | 1 1/16" | 0000000 | 00000 | 00000 |
5/16"-32 Male UNEF Threads | ||||||||
| Zinc | 25/32" | 1 3/32" | 3/16" | 3/16" | 1 5/16" | 0000000 | 00000 | 00000 |
Oil Cups
A built-in reservoir allows oil to gradually pass through to equipment, reducing time spent on manual lubrication. Flow rate depends on temperature.
Use 90° elbow cups for side-mount applications and where vertical space is limited.
Oil cups with wick feed have a wick that extends through the threaded connection of the cup and keeps the bearing dust-free and lubricated, even after the oil cup is drained.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cap., fl. oz. | Overall Ht. | Installation Clearance | Thread Lg. | Bowl Material | Pressure Regulation | 1-9 | 10-Up | |
1/8 NPT Male Outlet | ||||||||
| 1/16 | 1 1/2" | 1 7/32" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |
| 1/8 | 1 21/32" | 1 7/16" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
| 5/16 | 1 29/32" | 1 13/16" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
1/4 NPT Male Outlet | ||||||||
| 5/16 | 2" | 1 13/16" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
3/8 NPT Male Outlet | ||||||||
| 1 5/16 | 2 9/16" | 2 7/16" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cap., fl. oz. | Overall Ht. | Installation Clearance | Thread Lg. | Bowl Material | Pressure Regulation | 1-9 | 10-Up | |
1/8 NPT Male Outlet | ||||||||
| 1/16 | 2" | 1 7/32" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |
| 1/8 | 2 5/32" | 1 7/16" | 11/32" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
| 5/8 | 2 13/32" | 2" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
1/4 NPT Male Outlet | ||||||||
| 5/8 | 2 15/32" | 2" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
Overall | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cap., fl. oz. | Ht. | Wd. | Installation Clearance | Thread Lg. | Bowl Material | Pressure Regulation | 1-9 | 10-Up | |
1/8 NPT Male Outlet | |||||||||
| 1/8 | 15/16" | 1 11/32" | 1 19/32" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |
| 1/2 | 1 7/16" | 1 11/16" | 2 5/8" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
1/4 NPT Male Outlet | |||||||||
| 1/2 | 1 7/16" | 1 15/16" | 2 1/2" | 7/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
3/8 NPT Male Outlet | |||||||||
| 1 7/8 | 2 1/16" | 2 13/32" | 4" | 7/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
1/2 NPT Male Outlet | |||||||||
| 3 3/4 | 2 1/16" | 3 1/2" | 4" | 9/16" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |